GARAGE & SHOP
Due to our low prices, order minimum $25.00 "
GLS-3 CHANNELLOCK 3PC GRIPLOCK PLIER SET MADE IN U.S.A. LIFETIME WARRANTY Plier Set, Number Of Pieces 3, Manual Adjustment, Plastisol Handle, Carbon Steel, Polished Finished, Handle Color Blue, Meets/exceeds Ansi, Includes (1) Each: 7-1/2 In. Long Nose Plier W/cutter, 8 In. High Leverage Diagonal Cut Pliers, 9-1/2 In. Tongue And Groove Griplock Pliers
- Ideal for tightening, clamping, twisting, and turning
- Heavy-duty jaws that grip around work of all shapes are ideal for plumbers, mechanics, welders, and anyone working with large objects
- Turn screw adjusts pressure to fit work and stays adjusted for repetitive use
- Constructed of high-grade heat-treated alloy steel for durability
- Classic trigger release designed to provide maximum locking force
- Plier opens to 3 1/8" large enough to handle most situations requiring a large wrench item.
Made in the U.S.A.
Made in U.S.A. 
- High Quality, Industrial Grade, Professional Tools.
- Made with Eklind® Alloy Steel.
- Color coded RED for INCH.
- Color coded BLUE for METRIC.
- Plastic holder firmly retains each key in a size marked hole.
Includes 2 Sets
- 13 pc Long Series Hex-L® Key Set with Holder. Inch Sizes: .050
- Inch Sizes: .050-3/8”
- 9 pc Long Series Hex-L® Key Set with Holder
- Metric Sizes: 1.5mm-10mm
SG 23970 S&G TOOL AID IN-LINE SPARK CHECKER KIT FOR RECESSED PLUGS .
14300 S&G TOOL AID Mighty Cutter. Up to 1 1/18" O.D. material.
- Removes water and foreign particles from compressed air stream.
- Attaches directly to paint spray gun or air tool.
- Clear reservoir shows accumulated water taken out of air line.
- Button release valve allows for easy disposal.
- 1/4" NPT Male inlet x 1/4" NPT Female outlet.
- Filter can be removed and cleaned periodically.
- The male threads are on the inlet side and the female threads are on the outlet side. The 99000 should be used with the female outlet in the up position.
- Provides unrestrained knee comfort.
- Protects clothing.
- Perfect for all technicians, insurance estimators and service advisors.
- Great as a creeper cushion and seat cushion.
- Measures 23" long x 11" wide with 3/4" thick closed cell foam.
- Tough, non-slip laminate surface.
- Impervious to water, oils and other liquids.
- Convenient hang-up hole.
- Easy to clean.
- Extends life of all buffing pads and bonnets without taking them off the polisher.
- Cleans and revitalizes in one operation.
- Removes glazed surface and fluffs packed wool.
- Brings pads and bonnets back to like new condition in seconds.
- Minimizes washing.
- 1/4" NPT In-Line Lubricator
- Automatically lubricates air tools as they are being used.
- Ends tool burn out, stops rust and increases torque.
- Lubricates all internal moving parts.
- Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers.
- High impact clear plastic reservoir allows technician to monitor oil supply.
- 1/4" NPT Female inlet x 1/4" NPT Male outlet.
62900 S & G TOOL AID MACPHERSON STRUT COIL SPRING TOOL
1439 Large Blue Welders Glove.All purpose welding glove with high quality shoulder leather and reinforced palm patch.
5218 Magnetic Welder's Holder(can lift a maximum of 25 lbs). Special magnet will hold any iron objects at 45 degree,90 degree or 135 degree angles. Freeing hands from welding,soldering,assembly and other metal work.
3110 3 lb. Fiberglass Sledge Hammer Specifications: •Drop Forged, Heat Treated Steel Head •Fully Polished Head •Square, Polished Striking Faces •Rugged 50% Fiberglass Handle •Cushioned Textured Non-Slip Rubber Grip •Epoxy Bond Locks Head to Handle
- Extra-heavy follower spring ensures positive priming and uninterrupted pumping action
- Jam-proof toggle mechanism provides years of trouble-free service
- Premium dual-lip follower eliminates grease bypass for a cleaner work environment and no wasted grease
- Accessible check valve allows for easy cleaning of hardened and/or contaminated grease
- Precision-machined plunger and bore prevents bypass and airlock
GRIP 14407 12" Flexible Grease Gun Hose is used with manual grease guns to allow you access into confined working areas. It's heavy-duty design is able to handle the high pressure associated with hand held grease guns. It can also be used with multiple hoses for an extra long reach
2294 4" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2305 8" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2320 10" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2326 12" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2330 15" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2340 18" ADJUSTABLE WRENCH . Drop forged,chrome plated.
2341 24" ADJUSTABLE WRENCH . Drop forged,chrome plated.
03007L 3 pc. Flexible Stubby Ratchet Set. 1/4",3/8" & 1/2" drive. Heat treated,drop forged,180 degree radius,flex head.
52105 10"D x 3 1/2" W REPLACEMENT AIR TIRE . Ball bearings provide quiet operation. Capacity:300 lbs @ 30 psi.
TITAN 4PC JUMBO BOLSTERED PICK & HOOK SET
♦ 1 each: straight, 90 degree, offset & curved
♦chrome-vanadium steel shafts
♦Comfortable TPR grips.
- Economical - great for one-time or repeat use in acid, glue, paste, soldering, touch-up, applying zinc primer,
dusting, or other general-purpose applications - Great for brushing seam sealer in auto body applications
- 144pc Brushes feature 100% pure black horsehair bristles and strong metal ferrules
- 1/2" bristle width, 3/4" trim (bristle length), 6" total brush length
- Acid brushes proudly Made in USA
GA4030 MAKITA 4" Electric Angle Grinder (11,000 rpm) Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications Small circumference barrel grip (only 2-1/4") for added comfort Labyrinth construction seals and protects the motor and bearings from dust and debris Refined design at only 3.1 lbs for increased control Rotatable gear housing can be positioned every 90° for cutting applications
Pallet pullers are used to pull pallets to rear of trailers for easy fork truck access
Specifications:
- Type Pallet puller
- Capacity 2-1/2tons
- Material Rugged Steel Construction
- Safety Pallet pullers are NOT designed for lifting
FRL Filters, Regulators and Lubricators
Model FRL 80 / FRL 85 Filter Regulator Lubricator
Model FLM 86 Air Cleaner / Dryer
102D-158F 1 ½” Dry 1/8NPT
160 PSI/KPA/BAR Brass Back
1/2" WIDTH x 520" LENGTH TEFLON THREAD TAPE (10 ROLLS)
Features:
- High quality, white Teflon tape
- Can be used as a pipe thread sealant and a sealant for air hose fittings
- Teflon tape has a sealing function to prevent the leakage of water or gas.
- Each roll of teflon tape has a width of 1/2" inch and a length of 520 inches, which can be used multiple times.
- Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance, teflon tape is widely used in home and office.
- This tape is made of PTFE material, which has high sealing and durability.
3/4" WIDTH x 520" LENGTH TEFLON THREAD TAPE (10 ROLLS)
- High quality, white Teflon tape
- Can be used as a pipe thread sealant and a sealant for air hose fittings
- Teflon tape has a sealing function to prevent the leakage of water or gas.
- Each roll of teflon tape has a width of 1 inch and a length of 520 inches, which can be used multiple times.
- Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance, teflon tape is widely used in home and office.
- This tape is made of PTFE material, which has high sealing and durability.
1" WIDTH x 520" LENGTH TEFLON THREAD TAPE (10 ROLLS)
Features: High quality, white Teflon tape Can be used as a pipe thread sealant and a sealant for air hose fittings
- Teflon tape has a sealing function to prevent the leakage of water or gas.
- Each roll of teflon tape has a width of 1 inch and a length of 520 inches, which can be used multiple times.
- Teflon tape is a necessity for plumbers, when you use any threaded pipes and you hope they will not leak water or gas, and plumbing tape has good performance, teflon tape is widely used in home and office.
- This tape is made of PTFE material, which has high sealing and durability.
Heavy duty, angled aluminum body with rubber tip and thumb trigger
• Use to Clean Damaging Dirt and Grime Build-ups
• Use with Large machinery, Engines, Heavy equipment, and More!
• White Zinc Plated Alloy Body Resists Corrosion
• 1/4" NPT Inlet Connects Quickly to Air Hose Couplings
•6"
10300 GRIP 5PC QUICK COUPLER SET BRASS BY GRIP . Rust resistant brass. Each set contains one coupler (1/4" NPT female thread). One female connector with 1/4" NPT thread and three male connectors (1/4" NPT thread).
- Can be used on many small tractors, lawn mowers, snowmobiles, garden tillers, go karts, generators, and more with 1/4" or 5/16" fuel lines
- The material is plastic and paper and metal appearance is transparency and neat. No rough burrs, strong visibility
- The number of pleats of the filter paper is dense, filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power
- FLEXIBLE SOCKETS FOR HARD TO WORK AREAS
- 180* DEGREES + OF ROTATING ANGLES
- SAE STANDARD SIZES 3/4” 5/8” 9/16” 1/2” 7/16” 3/8”
- DROP FORGED, HEAT TREATED TOUGH STEEL ALLOY
- CHROME PLATED FOR DURABILITY AND LONG LIFE
11073 TITAN 3/8" DRIVE X 18" EXTRA LONG FLEX HEAD QUICK RELEASE RATCHET . Detailed Description •Flex-head design for hard-to-reach fasteners •36-tooth gear-drive ratchet mechanism for high torque applications •Quick-release feature holds sockets when you want them - lets go when you don't •Contoured cushion grip handle •Packaged on hang tab Manufacturer Information Titan continually strives to bring fresh ideas and new products to its customers. Our products are unique in design and are dressed in innovative dynamic packaging. As such, customers and consumers easily recognize the quality, uniqueness and value in our products. Titan is committed to excellence in everything we do, from research and development to manufacturing and customer service.
11074 TITAN 1/4" DRIVE X 12" EXTRA LONG FLEX HEAD QUICK RELEASE RATCHET . Extra-long flex-head design for hard-to-reach fasteners •36 Tooth gear drive ratchet mechanism for high torque applications •Contoured cushion grip handle
11075 TITAN SET OF ALL 3 EXTRA LONG FLEX HEAD QUICK RELEASE RATCHETS (1/4",3/8" & 1/2" Dr) .Features: - Contains 1/4 inch drive x 12 inch, 3/8 inch drive x 18 inch and 1/2 inch drive. x 24 inch ratchets - Extra long flex head design for hard to reach fasteners - 36 Tooth gear drive ratchet mechanism for high torque applications
- Inline fuel filters help prevent grit and grime from entering into your engine.
- This In-line fuel filter has pleated paper mesh and encased in a transparent plastic housing.
- Use with motor cycles, scooters and other small motors.
- Construction - Nylon
- 55mm X 50mm Diameter with pleated paper mesh.
- 🚙5/16 " IN-LINE FUEL FILTER— Fuel Filter Fits 5/16 "Oil Pipe-5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.
- 🚙SIZE & APPLICATION—Filter Size: 97mm x 53mm; Diameter Size Of Inlet And Outlet Pipe: 9.3mm. Both Ends Are Connected With 8mm Inner Diameter Fuel Pipe. If The Gas Flows Through The Filter, please Check Through The Design.
- 🚙BROAD COMPATIBILITY—General Fuel Filters Can Be Used For Tractors, Cars, Trucks, Motorcycles, RVs & Any Gasoline Powered Engines
87600 "HOT BLADE" DECAL REMOVER . AES Industries AES 87600 Hot Blade Decal Remover Removes decals, pinstripes and stickers by melting the adhesive securing them to metal or glass surfaces. Faster and easier than other types of scrapers. Removes aluminum foil labels! •Includes two #9 razor blades and a tool rest. •40 watts, 110 volts.
87940 INSPECTION STICKER SCRAPER . Durable steel construction with vinyl handle. Uses standard #9 single-edge razor blades.
23020 GRIP BRAND 2 TON 48". Item Description The Grip 23020 2 Ton Webbing Sling is great for lifting objects with polished, soft, or painted surfaces without damaging them.Features:Heavy duty, polyester webbing will not rot or tear when used in extreme conditions Easy to rig and remove What's In The Box:Grip 23020 2 Ton Webbing Sling Do you have questions about this product? Ask a question.
557 GENERAL 2 1/4" DIA. INSPECTION MIRROR ADJUSTABLE 9" TO 15" LONG MADE IN U.S.A. General's Inspection Mirrors are known for their seemingly limitless uses both around the home and in the shop. For instance, an Inspection Mirror can be used to check behind an armoire for lost keys or beneath an engine block for a missing bolt. Our Inspection Mirrors come in a variety sizes and lengths, and feature dual ball-and-socket joints for infinite angle adjustments of the mirror. This extendable Inspection Mirror is highlighted by a 2-1/4" diameter mirror and has a reach of up to 15” in length. Features & Benefits : •These mirrors facilitate inspection of inaccessible workpieces andmachines by toolmakers, assemblers, inspectors and mechanics •Fully polished glass mirrors are enclosed in plated holders whichare attached to knurled handles with ball and socket joints •Nos. 557, 577, 560, and 570 have telescoping armsand vinyl cushion grip handles DIMENSIONS Package Specifications = H: 9.62'' W: 3.75'' D: 1'' Cube: 0.0208 Weight: 3.2oz \ Weight: 0.2lbs Shelf Pack Specifications = H: 9.87'' W: 4.87'' D: 3.5'' Cube: 0.0975 Weight: 18oz \ Weight: 1.12lbs Master Pack Specifications = H: 21.25'' W: 10.87'' D: 14.62'' Cube: 1.9558 Weight: 288oz \ Weight: 18lbs METRIC DIMENSIONS Package Specifications = H: 0.244348mm W: 0.09525mm D: 0.0254mm Cube: 0.00052832 Weight: 90.718474gr \ Weight: 1.451495584Kg Shelf Pack Specifications = H: 0.250698mm W: 0.123698mm D: 0.0889mm Cube: 0.0024765 Weight: 510.29141625gr \ Weight: 0.51029141625Kg Master Pack Specifications = H: 0.53975mm W: 0.276098mm D: 0.371348mm Cube: 0.04967732 Weight: 8164.66266gr \ Weight: 8.16466266Kg
GENERAL TOOLS Telescoping Glass Inspection Mirror MADE IN USA
GENERAL'S Inspection mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines. Mirror enclosed in plated holder is attached to knurled handle by ball and socket joint Non-slip cushioned grip Mirror is replaceable through manufacturer (#560RMF)
- General Tools and Instruments inspection mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics
- A fully polished glass mirror is enclosed in plated holders which is attached with a ball and socket joint to a telescoping arm and vinyl cushion grip handle
- This 11-1/2 inch length inspection mirror extends to 16 inches and features a 3-1/2 inch by 2 inch oblong mirror
- General Tools and Instruments inspection mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanics
SIZES: 1/8”, 3/16”, ¼”, 5/16”
- Overall Length 7”- 12”
- Hardened and Tempered for long life.
- Heavy knurled body for better grip
- Punches are ground
- Shiny Black Finish
- Supplied In a Plastic Pouch
- Grooved Cap Design
- Extra Thick Foam Padding
- Heavy-Duty Plastic Caps on Front for Easy Swiveling
- Easy Fastening Elastic Straps
- 10" x 7.5", 8MIL Thick
- Great for Carpentry, Repair jobs
27146 GRIP 4 IN 1 PLUMBER'S BRUSH . FEATURES Contoured handle for a comfortable grip Cleans out dirt and corrosion from battery terminals and cable clamps Handles most popular sizes of battery terminals Colors may very
13" HORSE HAIR BRUSH WOODEN HANDLE
Extra-Fine Sweeping, Horsehair Scratch-free performance.
Deluxe hardwood block with black horsehair fill.
Not recommended for wet or oily surfaces
875 DEKA BULB TYPE BATTERY FILLER . 6 OZ. fill with 6" spout
Dial indicator reveals battery charge and specific gravity.
- Test 6V, 12V and 24V batteries
- Dial indicator style
- Instant reading
- Can be tested warm or cold
- Detects Overcharge
- AVOID DEAD BATTERIES, HELPS EXTEND BATTERY LIFE
TEST ALL 6, 12, 24 VOLT SYSTEM
Permanent instructions on back of each tester.
ANTI FREEZE TESTER: AVOID THAT WINTER FREEZE UPS AND THOSE
SUMMER BOIL OVERS.
TWO SCALES 1. FREEZE POINT OF RADIATOR SOLUTION. 2. BOILING POINT OF SUMMER COOLANT
33950 S & G TOOL AID FUEL INJECTION PRESSURE TESTER WITH TWO GAUGES • Test gasoline fuel pump pressure on most domestic and imported fuel injection equipped vehicles. • Easy to hook up and read. • Kit contains everything to test all GM vehicles with multi-port and some throttle body injection TBI. • Test all Chrysler cars with multi-port turbos and some TBI. • Use on most Ford TBI systems equipped with or without small Schrader test valve. • Test all Ford vehicles with multi-port fuel injection systems. • Includes two gages for more accurate testing: Large Gage - Calibrated from 0-100 PSI 0-7.0 BAR Small Gage - Calibrated from 0-50 PSI 0-3.5 BAR • Large gage can be used for all applications and has hang-up hook. • Small gage provides more detail when pressure will not exceed 50 PSI 0-3.5 BAR. • Full instructions included. • Supplied in durable vinyl pouch for store display and tool box storage.
17500 S & G TOOL AID PAIL PUMP FOR 5 & 6 GALLON PAILS . Fits all 5 and 6 gallon pails. Easily dispenses fluid with lift action. For use with all non-corrosive liquids. TeflonÆseal designed for use with thinner. Fully plated, steel construction. Dependable and long lasting.
- For 12 and 24 Volt; and 42 Volt Hybrid systems
- Computer safe - draws 3 milliamps at 12 Volts
- Has two LED's for easy voltage identification: blue for 12 and 24 Volts and red for 42 Volts
- Wire stretches to 10 feet for use, then automatically retracts
- Heavy duty ground clip with insulator
- Equipped with super sharp probe and heavy duty ground clip with insulator
52029 GRIP 3 WHEEL MOVERS DOLLY 160 LB .CAP . GRIP On Tools 52029 Three-Wheel Movers Dolly, 160 lb Capacity, Padded surface protects objects from damage, Ideal for moving over-sized or heavy objects, Swivel casters for easy mobility, Soft cushions protect bottom surface of object from damage, Depressed center allows for moving of objects with legs, 2-1/4-inch high, 3-inch base width, UPC 097257520290 (GRIP52029 GRIP-52029 520-29 520 29)
23021 GRIP 3 TON 96" WEBBING SLING . GRIP On Tools 23021 Three Ton Webbing Sling, Heavy duty polyester webbing will not rot or tear when used in extreme conditions, Easy to rig and remove, Great for lifting objects with polished, soft, or painted surfaces without damaging them, UPC 097257230212 (GRIP23021 GRIP-23021 23-021 230-21)
23022 GRIP 5 TON 78" WEBBING SLING . GRIP On Tools 23022 Five Ton Webbing Sling, Reduce the chance of damage when lifting objects with polished, soft or painted finishes; Heavy duty, polyester webbing will not rot or tear when used in extreme conditions; Easy to rig and remove; 78-inch Length; 5 tons Maximum capacity, UPC 097257230229 (GRIP23022 GRIP-23022 23-022 230-22)
6226 2" x 27 FT FLAT-HOOK RATCHET TIE DOWN . • Abrasion and Weather-Resistant Polyester Web Strap • Heat Treated Steel Flat Hooks • Dual-Gear Ratchet Applies More Tension with Less Effort • Quick-Release Dual Pawls Stay Locked and Maintain Tension During Transit • Meets WSTDA-T-1 Standard Specification as Required by FMCSA Cargo Securement Rules Working capacity: 3,300 lbs. Breaking capacity: 10,000 lbs.
- Use to properly secure ATVs, lawn equipment, motorcycles, and more to truck beds and trailers
- Heavy duty design will not loosen from road vibration
- Rubber coated S type hooks will not rust and protect vehicle finishes from scratches during use
- 1" polyester web belt with 400 lb. working load capacity
- Length adjusts from 4 ft. to 15 ft
- S-hooks with non-marring vinyl coating
- ■Automatic ratcheting lock action
- ■Quick release thumb button
- Working capacity: 500 lbs
- Breaking capacity: 1500 lbs
3250 7/8" WELDED DEE NICKEL PLATED (SOLD IN A PACK OF 10)
62272 GRIP 108 PC BIT ASSORTMENT . Sandblasted,S2 steel bits fit most power drills. Includes 6 pc magnetic bit holders, 108 pc bits including -phillips,flat,pozi,hex,star and more.
43115 42PC INSULATED CLAMP ASSORTMENT . Product Features Rubber lining absorbs vibrations and jolts, reducing wear and tear on cables and hoses Made of corrosion and rust resistant zinc plated steel with black rubber linings Mounting Hole: 1/4" D Sizes: 1/4", 3/8", 5/8", 1/2"
43136 GRIP 120PC NYLON CABLE CLAMP ASSORTMENT •Perfect to use for neatly securing and organizing cable, wire, tubing, and rods •Constructed from nylon for extra strength and resistance to age and most light chemicals •Includes storage box Sizes included: 3/8", 1/2", 3/4", 1/4",
1 1/4" PUTTY KNIFE FLEXIBLE BLADE STAINLESS STEEL WITH WOOD HANDLE
• Full tang, double-riveted construction
• Durable contoured hardwood handle
• Coated steel blade for easy clean-up and to resist rust and corrosion
• Light gauge (.020 in.) flexible blade for better control
52028 GRIP 3 WHEEL JUMBO MOVERS DOLLY . Three wheeled movers dolly uses 2" swivel casters to easily move over-sized, awkward or heavy objects. Ideal for moving furniture, appliances and more. 270 lb Capacity.
E-8C GREAT NECK 8" LINESMAN PLIERS WITH INSULATED HANDLES Product Description GreatNeck E8C 8 Inch Electrical Pliers Carded GreatNeck E8C 8 Inch Electrical Pliers Carded Features: • Vinyl grip handles, extra sharp honed cutting edges, rib grooved joints • Drop-forged construction • 8" • Carded .Lifetime warranty!
- Heavy-Duty heat-treated carbon steel
- Comfortable insulated vinyl handles for sure grip
Contents:
- 1-Pc. 5-1/2" bend Pliers (tip size: .038)
- 1-Pc. 6" straight Pliers (tip size: .038)
- 1-Pc. 5-1/2" bend Pliers (tip size: .047)
- 1-Pc. 6" Straight Pliers (tip size: .047)
- 1-Pc. 7-1/2" Bend Pliers (tip size: .070)
- 1-Pc 8" Straight Pliers (tip size: .070)
- 1-Pc. 8-1/2" Bend Pliers (tip size: .090)
- 1-Pc. 9" Straights Pliers (tip size: .090)
- 1-Pc. 5" Hook Tool
- 1-Pc 5" Pick tool
- 1- Pc. Snap-in Molded Carrying Case
3617 10LB MAGNETIC PICK UP TOOL (EXTENDS TO 29")
95300 4-WHEEL POLISHING KIT 1/4" SHANK . Choose from non-woven fiber wheels or felt wheels for polishing,deburring, cleaning and more. ◾Specifications: ◾Medium Non-Woven Fiber ◾80 Grit ◾1/4" Shank Arbor ◾Dimensions: 2" x 1/2" x 5/16"
95302 4-WHEEL POLISHING KIT WHITE FELT FOR FINE POLISHING 1/4" SHANK Felt, for fine polishing. ◾Specifications: ◾1/4" Shank Arbor ◾Dimensions: 2" x 1/2" x 5/16"
95304 3-WHEEL SAMPLE KIT 1/4" SHANK (INCLUDES ONE OF EACH) This multi-pack includes one polishing wheel from each of our #95300, #95301 and #95302 polishing wheel kits. Use for polishing, deburring, cleaning and more. ◾Specifications: ◾1/4" Shank Arbor ◾Dimensions: 2" x 1/2" x 5/16"
37035 GRIP 10FT x 2" WIDE NON-SKID TAPE •Improves footing in dangerous areas •Eliminates worry over slipping on wet steps •2-inch x 10-feet roll •Durable in wet or dry conditions
SG19250 S&G TOOL AID 1/4" CAP. HEAVY DUTY RIVETER WITH NOSE PIECES Easily sets five sizes of aluminum and steel rivets: 1/8? (3.2mm), 5/32? (4.0mm), 3/16? (4.8mm), 7/32? (6.0mm) and 1/4? (6.4mm). Versatile and easy to use. Long handles for greater leverage. Comfortable handle grips. Metal construction and simple design with few moving parts to ensure years of service. Lightweight plastic bottle catches rivet stems. Nosepieces thread into handles for convenient storage. 19800 S&G TOOL AID 1/4" CAP. HEAVY DUTY RIVETER WITH 5 NOSE PIECES 1/8",5/32",3/16",7/32" & 1/4" . Manufacturer Information S & G Tool Aid is a manufacturer of automotive specialty tools for the automotive industry. Categories of coverage include diagnostic tools, electrical tools, air line accessories, suspension & alignments products, hand tools and collision repair products.
91450 EAR PLUGS WITH CASE . Made from super soft PVC,type, reusable pair complete with connecting string. Provides comfortable and effective sealing in the ear canal with minimum fitting problems for hearing protection. Washable and corded for convenience Triple flange design Contains 2 sets of ear plugs and case for convenient storage
80558 2PC POLISHING COMPOUND GREEN & WHITE . For buffing stainless,all hand metals and aluminum.
- PROFESSIONAL GRADE: Convenient, built to last, a go-to tool for your automotive needs; Easy-grip
handle makes sure you are in full control while filling; Automatic shut-off feature prevents overfilling, and the no-drip valve tip keeps spills at bay - NO MORE SPILLS: A super smooth, spring-loaded, double action, fast flow valve tip prevents after-drip for a spill free performance, every time; Keeps you and your workspace clean and mess-free
- AUTOMATIC SHUT-OFF: Battery filler shuts off automatically when the battery cell reaches the proper fill level, ensuring optimum battery performance with no overfilling
- DURABLE CONSTRUCTION: Rugged polyethylene construction ensures long life; Safe for use with battery acid; Stops surface discharge caused by a wet battery
3508 6" Long Nose Plier . Drop Forged Heat Treated Steel Precision-Machined Jaws Sharp High-Frequency Treated Wire Cutters Cushioned Non-Slip Handle Grips High-Visibility Orange Handles are Easy to Locate
3530 8" End Nipper Plier . Drop Forged Heat Treated Steel Precision-Machined Jaws Sharp High-Frequency Treated Cutting Edges Cushioned Non-Slip Handle Grips
CAHQC-3 Cal-Hawk 3 Way Air Connector Brass 1/4" NPT . 3pcs 1/4" quick couplers 1pc male connector & 4-way connector
Features:
- Straight - On chuck & 30 degree
- Reverse angle chuck dual zinc alloy head
- Brass tube with chrome plated
- Zinc alloy bar with maximum air pressure 150 PSI
- Helps prevent battery drain when storing & repairing cars/trucks.
- Provides the most effective way to avoid auto theft
- Cut off power on racing cars & prevent fire.
- Durable brass terminals, nuts & washers
- Rust & corrosion resistant, Solid brass nuts and washers
- 1/4" X 3/4" Studs, (2) 3/16" mounting holes
- 5/16" brass terminals
- High Capacity: 300 AMPS.
- 2 Removable keys included
HP545WC 1/2" dia. Hitch Pin Assembly . Fits 1.25" Rec.
932 MILTON Tire pressure Gauge 0-60 PSI in 1 lb Increments . features and benefits: dial reads in psi and kpa durable rubber boot internal diaphragm construction for greater durability deflator valve 45 degree chuck gauge is 3-2-3 accuracy, 3% in the first quarter of the gauge, 2% in the middle half of the gauge and 3% in the upper quarter of the gauge. 0-60 psi - 2 lb increments, 0-400 kpa - 20 kpa increments
16228 TITAN 3 pc 1" Phillips Bits 1/4" Hex . TITAN professional tools can be counted on to provide a professional grade tool at a fair price. They are designed and built to provide a lifetime of quality for the professional and non-professional alike. Impact grade Fits standard 1/4" hex drivers Contains #1 and # 2 Phillips
16138 TITAN 9 pc 3/8" Drive Stubby XZN Triple Square Impact Bits Sizes: M4 to M18 Tamper Proof . Features: Includes sizes: M4, M5, M6, M8, M10, M12, MT14, MT16, MT18 Includes rail storage rack. 1/4",3/8" & 1/2" Drive
TITAN 9 pc Hex MM Stubby Impact Bit Socket Set
Features:
- Practical, efficient tools to get your job done right
- Made to ensure maximum longevity and high wear resistance
- Ultimate in reliability, convenience, and ease of use
Sizes: 6 MM to 19 MM . Impact grade Includes rail storage rack Sizes include: 1/4” Dr: 6mm, 7mm, 8mm, and 10mm 3/8” Dr: 12mm, 14mm, 17mm, 18mm, and 19mm.
16143 TITAN 10 pc Star Bit Set Tamper Resistant Sizes: T10 to T50 . Impact Grade Sizes include: 1/4" Dr: TT10, TT15, TT20, TT25, TT27, & TT30 3/8" Dr: TT40, TT45, TT47, & TT50 Includes rail storage rack
ND-7CB CHANNELLOCK Code Blue Nut Driver Set Sizes: 11/32" to 7/16" . This nut driver set features seven pieces that are ideal for for screwing in nuts. This set features multiple socket sizes to guarantee a fit for a wide range of nuts. These nutdrivers also features a code blue grip which guarantees a strong grip and prevents slipping. Opening Size: 11/32 in, 1/2 in, 1/4 in, 3/16 in, 3/8 in, 5/16 in, 7/16 in Opening Type: Hex Shank Length: 3 in Shank Type: Hollow Shaft Overall Length: 7 1/2 in Shank Material: Chrome Vanadium Steel Measuring System: Inch
30246 GRIP Garden Working Knee Pad . GRIP On Tools 30246 Garden Working Knee Pads, Protects knees from rugged surfaces while providing excellent support, Thick 3/4” foam padding ensures maximum comfort, Length of 16”, UPC 097257302469
KIT3083 1 lb Ball Pein Hammer with Fiberglass Handle
KIT3086 2 lb Ball Pein Hammer with Fiberglass Handle
KIT3087 3 lb Ball Pein Hammer with Fiberglass Handle
VB90031 8 OZ PROFESSIONAL BALL PEIN HAMMER MADE IN U.S.A. HICKORY HANDLE
CZHBC 2 5/16" A FRAME COUPLER . Hard steel construction
27030 GRIP 29" Mud Mixer . GRIP On Tools 27030 Mud Mixer 29", Ideal for mixing drywall mud, texture, paint and many other materials, Use this paint mixer with any power drill (3/8-Inch or 1/2-Inch chuck) for fast results, Hexagonal shaft provides positive chuck engagement, reducing slippage during use;
825 DRILL GRINDING ATTACHMENT MADE IN U.S.A. Features & Benefits : Engineered to permit sharpening of drill bits to factory accuracy Extends the life of drill bits Angle adjustments lock in to grind drill bits for more accurate drilling in a variety of materials Automatically adjusts to give correct clearance angle For use with ANSI, OSHA, and UL approved standard electric bench grinders or surface grinders Equally at home in machine shop and home workshop Instructions included DIMENSIONS Package Specifications = H: 11.25'' W: 6.75'' D: 1.87'' Cube: 0.0823 Weight: 19oz \ Weight: 1.18lbs
S620 MILTON AIR HOSE REPAIR KIT . Includes: 1 each #699 1/4" Female Air Chuck (Sealing Type Chuck not for use on Milton Inflator Gages) 1 each #663 1/4" NPT x 1/4" ID Male Hose End 1 each #676 1/4" ID Hose Mender 3 each #1602 Hose Clamps for 5/8" OD Hose
694 MILTON Chuck Clip With Male Chuck 1/4" I.D. Hose Made in U.S.A. Features: 1/4" barb for 1/4" ID hose. Sealing type chuck. Note: Sealing type chuck not for use with Milton Inflator Gages.
19900 VAPER REPLACEMENT CUP (Plastic) Paint Gun Cup Capacity:600 ml Paint Gun Cup Type:Gravity Paint Gun Cup Material:Plastic Paint Gun Cup Finish:White Quantity:Sold individually. Notes:Lid included. Genuine replacement part for VAPOR 19000 series gravity feed spray guns. In-Store Pickup:Choose In-store pick-up (OH, GA, NV) on our web site. Titan designed these plastic gravity feed paint gun cups with lid as genuine replacement parts to fit the VAPOR 19000 series gravity feed spray guns. They have a 600ml capacity and include a vented screw-on lid to help keep contaminants out of the paint or stain. These units also offer a drip and leak-free application of paint or stain for a more professional look to your completed project.
690 12" Heavy Duty Decal Scraper . Storage compartment in handle for extra blades. soft grip handle.
15200 TITAN PRECISION OILER . Our Precision Oiler is a highly accurate lubrication tool intended for anyone working with small mechanical parts. The needlepoint tip allows for the precise placement of oil in confined areas. The smooth thumb actuator lets you control the release of lubricant from the reservoir in small droplets. In addition, the Precision Oiler includes a screw-on cover and pocket clip for use on the go.
Features:
- Control the amount of air and paint being sprayed with this dual action trigger air brush
Includes:
- Dual Action Air Brush
- 7 mm Cover Wrench
- 1/4 in Air Hose Adapter
- 5 ft Vinyl Air Hose
- 3/4 oz Glass Jar
- 2 oz Glass Jar
- 5 mL Touch Up Jar
- Air Brush Holder
- Protective Cap
CPLSR4PB 4 pc Snap Ring Plier Set . Black oxide finished precision tip PVC Handles for a comfortable grip Each plier can be used for both Internal and External Retaining Rings Plier Sizes: Straight--6", 8" 90 Degree Offset--5-1/2", 7-1/2"
CWS13 13 pc Fractional Combination Wrench Set Sizes: 1/4" to 1" MADE IN KOREA . Sizes included: 1/4",5/16",3/8",7/16",1/2", 9/16",5/8",11/16",3/4',13/16",7/8",15/16" & 1". All drop forged high polished steel. Good quality.
83-648 Magnet With Flex Handle Made in U.S.A.
83-649 Mirror With Flex Handle Made in U.S.A.
3916 16 lb Magnetic Pick Up Tool Extends to 29"
3911 8 lb SUPER Pick Up Tool Extends to 26"
2 ton Doubled Webbing Sling
- Twisted eye, vertical ,choker basket hitches.
- Flat eyes easy to rig & remove under loads. Stitched 100% polyester.
- Moisture resistant Fabric, thus preventing frost damage
- Low Strain Wear resistant Long lift Material
12 Volt Trouble Light
- Metal "cage" to protect light bulb
- Large reflector behind bulb for extra light
- Red and Black clips match battery terminal colors
- Wire is 13-Feet long
- Stores easily in the trunk of the car
- On/off Switch on Handle
GDO600 MAKITA 1/4" Electric Die Grinder 1/4" Collet Features: High Speed (25,000 RPM) for Maximum Production All Ball Bearing Construction for Long Tool Life 1/4" Collet Capacity 3/4" Maximum Wheel Size for Small Grinding Applications Accepts Metal Cutters and Burrs for Production Work Double Insulated - Specifications: Collet Size: 1/4" No Load Speed: 25,000 RPM AMPS (115V): 2.0 Overall Length: 11-1/8"
DW758 DeWALT 8" Bench Grinder . 3/4 hp induction motor provides superior power for industrial grinding applications Rugged cast iron base and motor housing provide durability and prolonged life Motor runs at 3,600 rpm for high speed material removal Precision-machined aluminum tool rests allow the user to accurately position work Rear exhaust ports in wheel guards for smoother operation; 12-1/2-inch distance between wheels for larger and longer grinding applications
DW756 DeWALT 6" Bench Grinder . Details The 6 Inch Bench Grinder from DeWalt is the perfect addition to your work area to produce professional-grade results. The DW756 6 Inch Bench Grinder from DeWalt is one of the best quality bench grinders on the market today. This tool is ideal for any project that requires heavy duty grinding. Powerful 5/8 HP induction motor for heavy duty grinding operations Industrial cast iron base and motor housing provide durability and prolong life Motor runs at 3,450 rpm for high speed material removal Precision-machined aluminum tool rests allow the user to accurately position work Rear exhaust ports in wheel guards for smoother operation 12-1/2" distance between wheels for longer and larger grinding applications