![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023499.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/Adobe_Express_20231119_1227580_1.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023495.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023504.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023507.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023498.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/design/1000023496.png)
"HOT BLADE" DECAL REMOVER
Hot Blade Decal Remover Removes decals, pinstripes and stickers by melting the adhesive securing them to metal or glass surfaces.
- Faster and easier than other types of scrapers.
- Removes aluminum foil labels!
- Includes two #9 razor blades and a tool rest.
- 40 watts, 110 volts.
Description:
- Hot Blade Decal Remover
- Input Supply Rating 110 Volt
- Motor Rating 40 Watt
- Inclusions/Features (2) #9 Razor Blade
-
- Safely clean electronics, microchips boards and in tight areas on spray guns / air brushes, air tools and much more
Specialized, solvent resistant brush that is commonly used in various applications in plumbing, auto body repair, electronics cleaning and woodworking.These brush bristles are made from 100% pure horsehair which allows for smooth application with little to no air bubbles.
- Apply adhesives, grease, flux, powders, zinc primer, spray gun cleaner, paint remover, touch-up paints & stains
- Great for brushing in resin on molds and seam sealer on vehicles
- Safely clean electronics, microchips boards and in tight areas on spray guns / air brushes, air tools and much more
- Economical - great for one-time or repeat use in acid, glue, paste, soldering, touch-up, applying zinc primer,
dusting, or other general-purpose applications - Great for brushing seam sealer in auto body applications
- 1/2" bristle width, 3/4" trim (bristle length), 6" total brush length
- Acid brushes proudly Made in USA
KIT3084 1 1/2 lb Ball Pein Hammer with Fiberglass Handle
3300 1 1/2" Comb.Wrench Full Polish Lifetime Warranty
3240 1 1/4" Comb.Wrench Full Polish Lifetime Warranty
3236 1 1/8" Comb.Wrench Full Polish Lifetime Warranty
3355 1 3/16" Comb.Wrench Full Polish Lifetime Warranty
1060 1 3/8" Comb.Wrench Full Polish Lifetime Warranty
3245 1 5/16" Comb.Wrench Full Polish Lifetime Warranty
3358 1 5/8" Comb.Wrench Full Polish Lifetime Warranty
3280 1 7/16" Comb.Wrench Full Polish Lifetime Warranty
KIT3083 1 lb Ball Pein Hammer with Fiberglass Handle
Titan Combination Wrenches are constructed from high quality chrome vanadium steel for strength and durability. The mirror polish finish provides an appealing look to these quality wrenches.
The slim body design allows for increased accessibility in tight areas. The precise, easy to read stamping makes size identification very easy.
- Mirror polish finish
- Slim body design
- Precise easy to read size markings
- 12-Point box end
- 15 Degree offset on the box end
1-3/4" Combination Wrench Full Polish
Lifetime Warranty
3216 1/2" Comb.Wrench Full Polish Lifetime Warranty
1/2" dr. x 15" Long Flexible Handle Breaker Bar. Cold forged steel,nickel plated.
1/2" Drive Beam Scale Torque Wrench 200 ft lbs Precision
Scale includes both SAE and metric sizes and provides a readout in ft-lb, Nm, and in-lb
Palm-fit handle pivots on the beam to maintain a constant distance from the drive point for precise measurement
Bend pointer to zero before use
0300 1/2" DRIVE STUBBY RATCHET . For close quarter work. Only 4 1/2" long.
1/2" drive x 10" Long Heavy Duty Ratchet Handle
- QUICK RELEASE DESIGN - Easy release to change socket size
- EASY DIRECTION ADJUST - Slide to side to change rotation direction
- HEAVY DUTY - Drop forged chrome vanadium steel
- SAE / METRIC - For both SAE and Metric - Meets or exceeds ASME specifications
SPECS:
- Drop forged, Heat treated.
- Chrome plated, Mirror polish.
- Forward and reverse drive.
- Grip tightly
- 10" Long Handle
- 1/2" Drive
1/2" Female to 3/4" Male Heavy Duty Chrome Socket Adaptor
1/2" Female to 3/8" Male Heavy Duty Chrome Socket Reducer
1/2" x 5 1/2"Spring Link Zinc Plated
Spring Links are designed to make permanent and temporary connections. Easily connect and disconnect a wide variety of recreational and household items. Spring Links should be used with items equal or lower than the working load limit.
•Zinc-plated for durability Working load limit of 460 lbs.
•Creates a fast secure connection for rope and accessories
•Very versatile accessory for home, work and boat
• Do not use for overhead lifting or exceed the working load limit
1294 1/2" x 9/16" 12 Point Offset Forged Steel Box Wrench
3208 1/4" Comb.Wrench Full Polish Lifetime Warranty
1/4" dr. x 6" Long Flexible Handle Breaker Bar. Cold forged steel,nickel plated.
11074 TITAN 1/4" DRIVE X 12" EXTRA LONG FLEX HEAD QUICK RELEASE RATCHET . Extra-long flex-head design for hard-to-reach fasteners •36 Tooth gear drive ratchet mechanism for high torque applications •Contoured cushion grip handle
FEATURES:
- Molded comfort- grip handle and chrome vanadium steel construction for strength and durability
- 36-Tooth reversible ratcheting mechanism produces a sweep of 10 degrees
- Low tooth count and thick, heavy duty teeth provide more strength to apply greater torque
- 180-Degree flexible head for hard-to-reach applications
SPECS:
| Material | Chrome Vanadium Steel |
|---|---|
| Item Length | 12 Inches |
| Item Weight | 0.6 Pounds |
| Item Package Quantity | 1 |
| Head Style | Fixed Square, Flex |
| Finish Type | Powder Coated |
| Operation Mode | Mechanical |
| Size | 1/4-Inch Drive |
|---|---|
| Style | QUICK RELEASE |
| Finish | Powder Coated |
MTR-396 1/8" TO 1/2" CAP. REPAIRMAN'S TAPER REAMER . Removes burrs from small holes. Enlarges and countersinks holes in soft metals. Handy tool for mechanics,electricians, plumbers,machinists and carpenters.
- SAE sizes included: 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, and 2-Inch
- Constructed of carbon steel for strength and durability | Raised panel design
- 12-Point box end delivers sufficient amount of torque to tighten or loosen bolts while preventing rounding
- 15-Degree angled open end increases engagement with fastener in tight spaces and 15-Degree offset box end provides clearance for your hands
- Stamped size markings for easy identification | Includes reusable storage rack
Features and Benefits:
- Screwdriver tips manufactured from vanadium steel for strength and durability
- Plastic handle with rubber grip for comfort and increased control
- Features 8 different Phillips and slotted screwdrivers
- Also includes a magnetic tray and a magnetic pickup retrieval tool
Set includes:
- Slotted - 5/16" 10.75" OAL
- Phillips - #2 4.0" OAL
- Slotted - 1/4" 4" OAL
- Phillips - #1 6.75" OAL
- Slotted - 3/16" 6.75" OAL
- Phillips #2 8.25" OAL
- Square S2 8.25" OAL
- Slotted 1/4" 8.25" OAL
2320 10" ADJUSTABLE WRENCH . Drop forged,chrome plated.
Pro-Snip model 101G 10" Left cut aviation tin snip. Straight cuts and tight curves left.
Pro-Snip model 102G 10" right cut aviation tin snip.Straight cuts and tight curves right.
Pro-Snip model 103G 10" straight cut and wide curve aviation tin snip.
3617 10LB MAGNETIC PICK UP TOOL (EXTENDS TO 29")
29000 10PC. NEEDLE FILE SET . Ideal for automotive,craft,hobby and other applications. Allows precision filing in hard to reach areas on metal,wood,plastic,ceramic. Hardened and tempered,high carbon steel construction. Precision milled teeth. 5 1/2" overall length.
59911 11 pc Professional Locksmith Kit . unlock automobile and home doors and most locks. All the essential tools fold up into a velcro-shut 5/5 x 7.5" faux leather wallet.
- Long, tapered nose with fine tips is bent to 45 degrees to work around obstructions
- Ergonomic non slip molded grips for improved comfort and control, Long handles reach deep into tight spaces
- Premium quality drop forged and hardened alloy steel
- Precision machined jaws for maximum gripping power. Cross-cut teeth grip evenly in any direction
11" Diagonal Nose Long Reach Plier . Drop forged steel. For work in confined areas.
Features
- Superior long reach design for work in confined areas
- Machined jaws to maximum gripping strength
- Drop forged steel construction
- Soft grip handle
Features:
-
Superior long reach design for work in confined areas
-
Machined jaws for maximum gripping strength
-
Drop forged steel construction Soft grip handle
SPECS:
-
Mechanic Pliers: The heavy duty long reach pliers are designed for machinery installation and maintenance, automobile, motorcycle repair, pipeline maintenance, etc. Smooth opening and closing, easy to use. - Extra-long for Narrow Space: The longer handles of the extra long needle nose pliers allow deeper access to tight spaces. work great in those hard to reach places. keeping your hands away from sharp edges or hot surfaces of machine.
- Chrome Vanadium Steel: The extra long nose pliers are forged from a solid piece of chrome vanadium steel with fine polishing, according to hardening, temper and anneal for strength and durability.
- Tight Jaws: The saw teeth inside the long reach pliers head bite firmly, not easy to slip when hold and pull tiny fasteners, great for grabing and roating objects that are just too small for your fingers.
- Narrow Nose: The extra long nose pliers come with smooth precise narrow head, help rolling wire into a more rounded curve, clamping small screws, nails, etc. in tight spaces.
**COLORS MAY VARY
3222 11/16" Comb.Wrench Full Polish Lifetime Warranty
1295 11/16" x 13/16" 12 Point Offset Forged Steel Box Wrench
2326 12" ADJUSTABLE WRENCH . Drop forged,chrome plated.
CWS13 13 pc Fractional Combination Wrench Set Sizes: 1/4" to 1" MADE IN KOREA . Sizes included: 1/4",5/16",3/8",7/16",1/2", 9/16",5/8",11/16",3/4',13/16",7/8",15/16" & 1". All drop forged high polished steel. Good quality.
Features:
- Sizes 0.05, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 & 3/8"
- Low-profile design allows for higher torque application
- Better access in confined areas
- Constructed of S2 Alloy steel
- Rust resistant satin finish
- Handy storage rack with hanger
Sizes Included:
• 3/64, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" precision hex keys.
Features:
• Extra long design for max torque
• Patent pending textured finish for better grip
• Ball end design allows up to a 25-degree angle of entry for faster insertion and removal of screws.
• Allen wrenches are constructed of durable, high-quality S2 steel.
• Extra-long design provides more torque and greater reach.
• The long arm hex keys also feature a satin plated textured finish for non-slip grip.
• Sizes are laser etched onto keys for quick and easy identification.
• Set also includes a plastic organizer with size markings
13pc Metric Hex Bit Set: With a magnetic holder this bit set will stick just about anywhere you put them under the hood, which can be handy for odd angle or confined space work stick them where you can reach them and go to work.
- Chrome Vanadium steel bits for strength and durability
- 1/4" drive and 3/8" drive bit holders
- Handy Magnetic holder sticks to ferrous metal surfaces
Sizes Included:
- 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8 and 10mm
3226 13/16" Comb.Wrench Full Polish Lifetime Warranty
N40 13/16" Combination Wrench FACOM France Super High Quality . Facom wrenches feature specific profiles to speed work on hard-to-reach fasteners.
1296 13/16" x 7/8" 12 Point Offset Forged Steel Box Wrench
2330 15" ADJUSTABLE WRENCH . Drop forged,chrome plated.
1297 15/16" x 1" 12 Point Offset Forged Steel Box Wrench
3916 16 lb Magnetic Pick Up Tool Extends to 29"
VB90054 16 OZ PROFESSIONAL BALL PEIN HAMMER MADE IN U.S.A. HICKORY HANDLE
02892 16 oz Ripping Hammer Tube Steel Drop Forged, Heat Treated Steel Head Full Size Round Face for Accurate Striking Semi-Polished, Lacquer Coated Head Beveled-End Curved Claw Tubular Steel Handle with Cushioned Non-Slip Grip
3218M 18 MM Metric Combination Wrench. Full Polish. Lifetime Warranty
2340 18" ADJUSTABLE WRENCH . Drop forged,chrome plated.
•Drop Forged Hardened Alloy Steel Jaws
•Compound Cutting Action Requires Less Effort
•Tubular Steel Handles with Cushioned Non-Slip Rubber Grips
•Adjustable and Replaceable Jaws
•Cuts Bolts, Chain, Threaded Rod, and More
19566 2 1/8" SUPER JUMBO Combination Wrench
2-3/8" Super JUMBO Combination Wrench
KIT3086 2 lb Ball Pein Hammer with Fiberglass Handle
2 Piece Dental Pick Set Metal tool useful for hobby and crafts Stainless steel
These stainless steel dental picks are excellent for fine scraping, cleaning, scribing, and shaping tasks. This 4 piece set of dental tools has a variety of tips shaped to get into odd corners, crevices, and other hard to reach areas. Dental picks can be used for activities including hobby projects, gluing, removing old paint from crevices, fossil preparation, circuit probing, micro positioning, O ring removal, and a myriad of other activities.
3370 2" Comb.Wrench Full Polish Lifetime0Warranty
46020 2" Wood Surface Paint Brush 100% Natural Bristle Made in u.S.A. . Plastic handle. Premium brush.
Pallet pullers are used to pull pallets to rear of trailers for easy fork truck access
Specifications:
- Type Pallet puller
- Capacity 2-1/2tons
- Material Rugged Steel Construction
- Safety Pallet pullers are NOT designed for lifting
CHANNELLOCK® 480 BIGAZZ® Straight Jaw Tongue & Groove Pliers didn't get their name by accident. With a 5-1/2
inch jaw capacity, these pliers are as big as the job at hand. Its 12 non-slip, undercut adjustment channels offer a versatile range of adjustments for virtually every field application.
- The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG 90-degree, laser-hardened teeth for superior grip and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
- UNDERCUT tongue and groove won’t slip
- CHANNELLOCK BLUE® grips for comfort
- 100% MADE IN USA
Pro-Snip model 207 7" tin snip.Tight curves and straight cuts.
Pro-Snip model 210 10" tin snip.Tight curves and straight cuts.
Pro-Snip model 212 12 3/4" tin snip.Tigth curves and straight cuts.
- This Set Has Magnetic Heads
- Black, Oxidized Tips
- Great For Electronics
SET CONSIST OF:
- 5 Precision Wrenches: Sizes 4.0, 4.5, 5.0, 5.5, 6.0mm
- 2 Pc. Cross Point Screwdrivers: No 1 & No. 2
- 3 Pc. Hex Key Wrenches Sizes: 1.5, 2.0, 2.5mm
- 5 Pc. Nut Drivers: 3.0, 3.5, 4.0, 4.5, 5.0mm
- 6 Pc. Precision Screwdrivers .8, 1.4, 2.0, 2.4, 2.9, 3.8mm
3224M 24 MM Metric Combination Wrench. Full Polish. Lifetime Warranty
FEATURES:
- Dead blow hammer wont spark or rebound.
- Steel shot filled head.
- Flanged handle for a secure grip.
- Canister filled with steel shot in the hammer's head creates a dead blow effect to reduce rebound conserving energy of each blow
- Dead blow design also sustains impact, maximizes force, and absorbs the shock of impact
- Polyurethane head is resistant to cuts, splits, abrasions, and extremely cold temperatures
- Non-marring,bright orange
- High-impact poly jacket surrounds steel handle and head, preventing marring of surfaces
- Diamond textured handle for non-slip grip
| Handle Length: 11-1/4 in. | Head Material: Rubber |
| Handle Material: Polyurethane, steel core | Head Weight: (oz.)2 lb. |
| Product Length: 13-1/2 in. | Product Weight: 2.00 lb. |
| Striking Face Size: (in.)2-2/25 sq. in. | |
2341 24" ADJUSTABLE WRENCH . Drop forged,chrome plated.
- High carbon alloy steel with compound cutting action.
- Tubular steel handles with angled rubber grips allow maximum leverage.
- Adjustable and replaceable jaws.
- Commercial grade, Extra heavy duty construction.
- Angled rubber grips for maximum leverage.
- Easily cuts bolts, rods, rivets, bars, chains, etc.
Specifications:
- Forged and Hardened Jaws and Nut
- Rugged Cast I-Beam Handle
- Spring Loaded Floating Jaw with Aggressive Teeth for Sure Grip
- Wrench Size 24"
- Jaw Capacity 3-3/4"
Features:
- Use for cleaning spray guns and paint equipment, PVC, aluminum or copper piping, and tubing
- Steel
- Sizes: 1", 1-1/4", 1-1/2"
2774D Universal Brake Shoe Retaining Spring Tool Made in U.S.A. Features: Push and Turn to Remove or Install Double-Ended Tool Removes and Installs Small and Large Car Drum Brake Retaining Springs Tool Fits Sizes 5/8 to 11/16in and 11/16 to 7/8in Diameter Special Sockets Grip Retaining Washers
27031 GRIP 2PC. DETAIL CLEANING BRUSH SET . The Grip 27031 2-Piece Detail Cleaning Brush Set is ideal for cleaning dirt and grime out of small parts within the engine compartment prolonging engine life. The angled head allows greater access into hard to reach areas. Features: •Removes rust, grime, scale and dirt •Use to clean things around the home, garage and workshop •Heavy duty contoured plastic handles with rubber inlays for a more comfortable grip
KIT3087 3 lb Ball Pein Hammer with Fiberglass Handle
Features:
- 3 Pack
- Multi-purpose wire brush set
- Use for cleaning and polishing
- Perfect for small parts.
- Attacks heavy duty jobs.
- Cleans metal without sparking.
GRIP 3 pc 9" Wire Brush Set
1 Brass
1 Stainless
1 Nylon
- Use for punching holes in laminated documents, thick paper, jewelry making, crafts, repairing shoes, belts,
garments & more. - Leather hole punch has rotating head with punch sizes of 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm.
- Drop forged, heat-treated steel handles with textured finish for a secure hold.
- Ideal for adding metal grommets to leather belts
- Great for customizing garments, purses, jackets, and much more
Includes :
- 1 pc leather hole punch
- 2 pc grommet setting pliers
- 100 pc shoe or belt grommets
- 100 pc button snaps
30936 Titan 3 pc low Profile Adaptor Set . This is a low profile adapter that is manufactured in various sizes to allow a ratchet wrench to drive a socket one size larger than would otherwise be suitable. Can used in relatively tight circumstances. Set includes 3/4 in. to 1/2 in., 1/2 in. to 3/8 in., 3/8 in. to 1/4 in. Cr-MO construction Detent ball design Impact grade Black oxide finish
Set of 3 impact grade chrome moly socket adapters
(1) 1/4" Female to 3/8" Male
(1) 3/8" Female to 1/2" Male
(1) 1/2" Female to 3/4" Male
Detent ball design for secure socket retention
3 pc Pipe Brush Cleaning Kit
- Effective for cleaning tubes & other cavities by hand
- 1 pc 5/8" dia. brush
- 1 pc 3/8" dia. brush
- 1 pc 1/2" width brush
- 3-piece set of aviation tin snips for easy cutting from any angle (left, right, straight)
- Cuts through thin sheets of aluminum tin and metal, including up to 18-gauge steel and up to 22-gauge stainless steel
- High-leverage design with serrated-edge blades for efficient cutting; made of premium chrome vanadium steel processed with a high-frequency heat treatment
- Colored handle with a rubberized grip helps ensure a secure hold and precise cuts; latch locks tool shut when not in use to help protect the blade; one-handed auto release
3 pc Dead Blow Hammer Set Sizes: 1lb,1 1/2 lb & 2lb .
Soft face, won't mar work surfaces.
Head is packed with metal pellets to add extra force to the hammer and eliminate rebound.
Handle is specially contoured for a firm.
Set includes 1 each: 1 lb,1 1/2 lb & 2 lb.
03007L 3 pc. Flexible Stubby Ratchet Set. 1/4",3/8" & 1/2" drive. Heat treated,drop forged,180 degree radius,flex head.
MULTI-USE SYRINGE ASSORTMENT SET
Includes:
- (1) 10 ml
- (1) 20 ml
- (1) 60 ml
- Use for adhesives, greases and oils
- Use with caulking, grout and fuels
- Use to administer medications to animals
- Use to remove fluids from containers
3 pc Brush Kit . One brass brush. One stainless steel brush for heavy duty scratching. One soft nylon brush for gentle clean up work.
GRIP Three-Piece Mini Wire Brush Set
Features:
Use for intricate cleaning of grills, small parts, bolt threads, electronics, grout lines, and more Brushes remove dirt, grime, rust, scale, and paint Angled and contoured plastic handle provides a secure hold during use
46030 3" Wood Surface Paint Brush 100% Natural Bristle Made in U.S.A. Plastic handle. Premium brush.
3224 3/4" Comb.Wrench Full Polish Lifetime Warranty
3/4" Female to 1" Male Heavy Duty Chrome Socket Adaptor
3/4" Female to 1/2" Male Heavy Duty Chrome Socket Reducer
3212 3/8" Comb.Wrench Full Polish Lifetime Warranty
3/8" dr. x 9" Long Flexible Handle Breaker Bar. Cold forged steel,nickel plated.
030038 3/8" DRIVE STUBBY RATCHET . For close quarter work. Only 4 1/2" long.
3/8" Female to 1/2" Male Heavy Duty Chrome Socket Adaptor
1293 3/8" x 7/16" 12 Point Offset Forged Steel Box Wrench
•Drop Forged Hardened Alloy Steel Jaws
•Compound Cutting Action Requires Less Effort
•Tubular Steel Handles with Cushioned Non-Slip Rubber Grips
•Adjustable and Replaceable Jaws
•Cuts Bolts, Chain, Threaded Rod, and More
REACHING TOOL & GRABBER
- 360° swivel head adjusts for any need.
- Perfect for reaching low or high items
- Reduces back & knee strain.
- Holds round items, like bottles, jars, and cups.
- Great for picking up trash & debri
- Ergonomic handle for a secure hold.
27146 GRIP 4 IN 1 PLUMBER'S BRUSH . FEATURES Contoured handle for a comfortable grip Cleans out dirt and corrosion from battery terminals and cable clamps Handles most popular sizes of battery terminals Colors may very
Professional Snap Ring Pliers Set makes installing and removing internal and external snap rings, circlips and retaining rings more comfortable and secure to get the job done right.
FEATURES:
- Includes both straight & 90° internal and external pliers.
- Riveted joint for smooth operation.
- Spring-loaded pliers with non-slip PVC grip for comfort and easy use.
- Constructed from durable forged Chrome Vanadium steel with precision-machined solid tips for durability and to keep snap ring engaged while in use.
- Each plier can be used for both Internal and External Retaining Rings Plier
- Black oxide finished precision tip PVC Handles for a comfortable grip
- Sizes: Straight--6", 8" 90 Degree Offset--5-1/2", 7-1/2"
- Hardened & tempered alloy steel construction
- Comfortable plastic handles
- Bastard cutting teeth
- 8" long files, 12" overall length
- Contents: 1-pc flat, 1-pc square, 1-pc round, 1-pc half-round
SIZES: 1/8”, 3/16”, ¼”, 5/16”
- Overall Length 7”- 12”
- Hardened and Tempered for long life.
- Heavy knurled body for better grip
- Punches are ground
- Shiny Black Finish
- Supplied In a Plastic Pouch
2294 4" ADJUSTABLE WRENCH . Drop forged,chrome plated.
- Rubber tips for scratch proof clamping.
- A versatile tool for clamping a wide range of surfaces
- Cam action clamping
- Ideal for many applications
- High carbon alloy steel with compound cutting action.
- Tubular steel handles with angled rubber grips allow maximum leverage.
- Adjustable and replaceable jaws.
- Easily cuts bolts, rods, rivets, bars, chains, etc.
Description:
- Hardened and tempered stainless steel blades.
- Double injected needles.
- Comfortable hold.
- Use for pulling o-rings, seals, cotter pins, retaining clips, and removing or installing springs.
- Can also be used to clean or scrape rust and corrosion from hard to reach areas.
- Double injected rubber grip handles with heat treated, chrome plated, vanadium steel shafts.
Includes :
- 1 pc straight pick
- 1 pc full hook
- 1 pc offset 45° hook
- 1 pc offset 90° hook.
GRIP 5 pc Door Panel Tool Set
This tool set is used to remove door panels and other interior trim. Wide blades reduce risk of damage to panel during removal. Blades are made of heat treated, stainless steel for durability. Handles are made of double injected rubber for a secure grip.
Includes three door panel tools and two trim tools
Hanging hole for easy storage
The SE 5-Piece Mini Nylon Brush Set is an ideal brush set for cleaning airbrushes, paint spray guns, small nozzles, tattoo equipment, thin tubes, and so much more.
The set includes 5 different brush sizes that are excellent for all kinds of small household and hobby projects.
Bristle working dimensions:
- 16 mm x 1.5 mm dia.
- 18 mm x 2.3 mm dia.
- 23 mm x 3.2 mm dia.
- 24 mm x 4.0 mm dia.
- 29 mm x 4.3 mm dia.
MPL0026 5PC. DRIVE PIN PUNCH SET SIZES:1/8" TO 3/8" WITH POUCH . Very popular punch set. Hardened and tempered. Consists of five popular sizes. Long drive pin punches. Sizes: 1/8",3/16",1/4",5/16" & 3/8".
These pliers are Compact, providing greater control when working on your project.
- Hardness: 55
- Double leaf spring helps keep the pliers open to reduce hand fatigue over extended use.
- Comfortable grip handle has been rubber dipped for added slip resistance.
- Overall Length: 5"
- Nose Length: 1-1/4"
- Non-serrated jaw with Cutter
- Use on soft metals such as copper, gold, silver, etc.
3210 5/16" Comb.Wrench Full Polish Lifetime Warranty
3220 5/8" Comb.Wrench Full Polish Lifetime Warranty
Features:
- Mini-set is great for cleaning small areas and tight little spaces.
- Give your spray gun a thorough cleaning with these intricate mini brushes
- Various sizes included for cleaning internal spray gun openings and air cap
- Includes 1/16", 3/32", 1/8", 3/16" and 1/4" brush diameters
- Brushes attached to a key ring for convenient storage
- Made from stiff, nylon bristles that won't damage your spray gun
Specifications:
- Brush Length: 4"
- Sizes Included: 1/16", 3/32", 1/8", 3/16", 1/4"
GRIP 6 pc Nut Driver Set SAE Sizes: 3/16" to 1/2"
Features:
- Ergonomically designed, soft grip handles
- Chrome vanadium steel shafts
- Bolster holes for extra leverage
- Hollow shaft to allow clearance for bolts
- Size identification on shafts
Sizes included:
3/16",1/4",5/16",3/8",7/16" and 1/2"
Features:
- Sizes:1/4" to 9/16"
- Impact grade
- Color ring for easy size identification
- 1/4" hex shank fits any standard drill chuck
- Includes handy storage rail
FEATURES:
• Anodized magnetic aluminum socket rail
• S2 alloy steel bits for strength and durability
• Rust resistant finish
• Exceeds ANSI standards
• Sizes include: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8
SPECS:
Bit Type: Hex
Locking: No
Magnetic: No
Material: Chromium-Vanadium Steel
Quantity: 6
Socket Size (in): 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 Inch
Overall Length (in): 9-5/8 Inch
Overall Length (mm): 56mm
Bit Size (in): 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 Inch
SAE Or Metric: SAE
Number Of Points: 6
Socket Depth: Standard
Drive Size (in): 1/2 Inch
LED Light Included: No
Knurled: No
Storage Tray Included: No
Wobble: No
Impact: No
Bit Length (mm): 18mm
Flexible foam pad conforms to all surfaces.
Great for concave or convex surfaces that are difficult for a sanding board or block.
Uses 6" round PSA sandpaper.
- Precision-Machined Jaws Sharp
- Pliers are made from drop forged, heat treated steel.
- Handles are covered in high visibility cushioned non-slip grips making them comfortable and easy to locate.
- Plier jaws are polished and machined for precision.
- FLEXIBLE SOCKETS FOR HARD TO WORK AREAS
- 180* DEGREES + OF ROTATING ANGLES
- SAE STANDARD SIZES 3/4” 5/8” 9/16” 1/2” 7/16” 3/8”
- DROP FORGED, HEAT TREATED TOUGH STEEL ALLOY
- CHROME PLATED FOR DURABILITY AND LONG LIFE
3911 8 lb SUPER Pick Up Tool Extends to 26"
90032 8 oz Ball Pein Hammer with Fiberglass Handle
2305 8" ADJUSTABLE WRENCH . Drop forged,chrome plated.
The 8" End Nipper Pliers include precision machined jaws for gripping, twisting and cutting. The product is extremely durable with its Cr-V steel construction and includes anti-tear material to help extend the life of its grip.
Features:
- Cr-V steel construction for durability
- Dipped grips for comfort & secure grip
- Anti-tear material helps extend the life of grips
- Meets & exceeds ANSI specifications
- Precision machined jaws for gripping, twisting & cutting
Features:
- Deep reaching long nose pliers are ideal for hard-to-reach areas
- Matte comfort grips allow you to comfortably pull, bend and cut wire
- These long nose pliers are essential for any electrician, handyman or professional contractor
- High Carbon Steel Drop Forged Harden Teeth
- Polished Finish
8" Pipe Wrench Heavy Duty Drop forged Steel
Rugged steel construction stands up to heavy jobsite use. The steel pipe wrench also features replaceable heat-treated jaws.
- Heavy duty steel construction
- 3/4 in. pipe capacity
- Durable enamel finish
The CHANNELLOCK® 908 8.25" Wire Strippers are precision-machined and designed to last against the rigors of everyday use. Includes a precision-ground cutter, screw shears, common stripping hole sizes and a lean nose design for pulling and looping wire. CHANNELLOCK® Wire Strippers are Proudly 100% made in USA.
- PRECISION cutting edges cleanly cut and strip AWG 10-22 wire
- CRIMPER for use on insulated and non-insulated connections and terminals
- SCREW SHEARS 10-24, 6-32, 8-32, 10-32, 4-40
- COAX Cable crimper
- LEAN pliers nose pulls and loops wire
- LASER-ETCHED gauge indicators
- CHANNELLOCK BLUE® grips for comfort
Features:
- Length 6"extends up to 26".
- Magnet pulls up to 9 lbs.
- Red handle.
- Great use for picking up loose screws, nuts & bolts.
Features:
- Ball end allows for up to 25° angle of entry (Hex Only)
- Satin plated textured finish for better grip
- Easy to read laser etched sizes on keys
- Constructed of S2 steel
- Size identified plastic organizer
Includes:
- (9) 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm Metric Non Slip Ball End Hex Keys
- (1) Plastic Holder
- Sizes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
- Ships in reusable storage holder
- Pivot style release feature allows removal of any key without moving adjacent keys out of the way
- High polished stainless steel construction
- Easily fills and release air from tire valves
- 1/4" NPT female fitting
- Soft, plastic grip for comfort and a secure hold
- Useful for car, light truck, RV's, ATV's, and wagon air tires
91040 MULTI PURPOSE LIGHTER . Refillable butane. Child resistant. Reaches tight places. One action.
BABY BENCH VISE 2" JAW WIDTH 1 1/4" jaw opening Ideal for small jobs.
This 2" bench vise is crafted and designed to provide dependable service and long life! This vise is constructed from cast steel. The jaws and anvil have been hardened . The base swivels 360° and locks in place with two lockdown bolts. These are great for the shop, or for mounting on a block bench.
FEATURES:
- Versatile tool for filing, flattening or laying out work
- Combination Anvil and Bench Pin features a finished Anvil top and replaceable Bench Pin
- 2" Bench Vise | 360° Swivel Fittings | Jaw Width: 2" | Jaw Opening: 1-1/2"
- Ideal for providing maximum clamping and holding power to keep the work piece steady
Hex End T-Handles - ProGuard™ Finish
- Solid steel handles
- Welded handle/blade connection
- Ergonomic handle design
- Flywheel effect saves time
- Smooth, non-porous handle coating
- Handle coating extends along blade
MADE IN THE U.S.A. Product Description Bondhus 15290 - Hex Tip Graduated Length T-Handle Set of 10 pcs w/ProGuard Finish. Bondhus' ProGuard Finish is a special corrosion resistant finish that uses Bondhus' special dry surface technology. Bondhus' ProGuard Finish is environmentally safe, provides better tool grip and is 5 times more corrosion resistant. Includes sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8. Set comes w/stand.. All Bondhus Tools are made with Protanium High Torque Steel, which is up to 20% stronger with more torque and twice the wear resistance of standard steel grades.
- Extends life of all buffing pads and bonnets without taking them off the polisher.
- Cleans and revitalizes in one operation.
- Removes glazed surface and fluffs packed wool.
- Brings pads and bonnets back to like new condition in seconds.
- Minimizes washing.
Features:
- Drop forged, heat-treated steel shaft and handles with insulated double dipped cushion grips
- Strips copper and aluminum wire from 10 to 24 AWG
- Wide size range for bolt cutters and screw sizing
Combination Long Nose Pliers offer a sleek, lightweight design and feature Xtreme Leverage Technology (XLT™). XLT™ positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge, adding increased strength and longevity over traditional hardening practices.
CHANNELLOCK® Long Nose Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
FEATURES:
- COMBINATION Long Nose Pliers design is sleek, lightweight and includes an additional pipe grip feature
- XTREME LEVERAGE TECHNOLOGY (XLT™) increases performance and reduces hand fatigue
- LASER heat-treated cutting edges perform better and last longer
- CROSSHATCH TEETH to provide maximum grip
- PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity.
- FORGED high carbon U.S. steel for strength and durability is specially coated for ultimate rust prevention.
- CHANNELLOCK BLUE® grips for comfort
CHANNELLOCK® High Leverage End Cutting Pliers feature Xtreme Leverage Technology (XLT™) which makes cutting
easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK® End Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
- XTREME LEVERAGE TECHNOLOGY (XLT™) increases performance and reduces hand fatigue
- LASER heat-treated cutting edges perform better and last longer
- PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort
CHANNELLOCK Long Nose Pliers feature a crosshatch teeth pattern providing a maximum grip and a narrow nose profile that delivers extra precision in hard-to-reach areas. A precision-machined knife and anvil style cutting system ensures perfect mating while state-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge, adding increased strength and longevity over traditional hardening practices. Long Nose Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
- PRECISE narrow nose design provides accessibility for hard-to-reach applications
- CROSSHATCH TEETH to provide maximum grip
- LASER heat-treated cutting edges perform better and last longer
- PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
- CHANNELLOCK BLUE® grips for comfort
- 100% MADE IN USA
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
FEATURES:
- The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG 90-degree, laser-hardened teeth for superior grip and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention.
- UNDERCUT tongue and groove won’t slip
- CHANNELLOCK BLUE® grips for comfort
CHANNELLOCK® 414 13.5" Tongue & Groove Pliers have a special parrot nose and double tongue & groove design that gives this NUTBUSTER® added strength, ideal for round surfaces. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. These pliers include an added SAFE-T-STOP® feature to prevent finger pinch with the combination of a lower jaw design and an expanded reinforcing rib preventing unwanted handle contact. CHANNELLOCK® NUTBUSTER® Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
- PARROT JAWS are self-gripping and ideal for use on round surfaces
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG laser-hardened teeth for superior grip and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
- UNDERCUT double tongue & groove won’t slip
- Patented SAFE-T-STOP® feature prevents finger pinch
- CHANNELLOCK BLUE® grips for comfort
- 100% MADE IN USA
A convenient assortment of popular CHANNELLOCK® tools. A perfect gift for people that know what real work is all about.
The ORIGINAL STRAIGHT JAW Tongue and Groove Pliers provide a strong, versatile grip for use in both directions
FEATURES:
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG 90-degree, laser-hardened teeth for superior grip and longevity
- FORGED high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention.
- UNDERCUT tongue and groove won’t slip
- CHANNELLOCK BLUE® grips for comfort
CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
- Set Includes: 7" HL Diag Cutting Pliers and 9.5" Tongue & Groove
FEATURES:
- CHANNELLOCK® GS-4, 3-Piece Plier Set includes the iconic 430® 10-inch Tongue & Groove Plier, 3017 8-inch Long Nose Plier, and the 337 7-inch XLT™ Diagonal Cutting Plier.
- CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are built to last with a PERMALOCK® Fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser heat-treated teeth to provide a better, longer lasting grip.
- CHANNELLOCK® Long Nose Pliers feature a crosshatch teeth pattern providing a maximum grip and a narrow nose profile that delivers extra precision in hard-to-reach areas.
- CHANNELLOCK® High Leverage Diagonal Cutting Pliers feature XTREME LEVERAGE TECHNOLOGY (XLT™) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut that other high leverage designs.
- CHANNELLOCK® Tongue and Groove, Diagonal Cutting, and Long Nose Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
Set INCLUDES:
- 10-inch Tongue & Groove Pliers
- 7-inch XLT™ Diagonal Cutting Pliers
- 8-inch Long Nose Pliers
SPECS:
- Model 430®: The ORIGINAL STRAIGHT JAW Tongue and Groove Pliers provide a strong, versatile grip for use in both directions
- Model 337: XTREME LEVERAGE TECHNOLOGY (XLT™) increases performance and reduces hand fatigue
- Model 3017: PRECISE narrow nose design provides accessibility for hard-to-reach applications
- Model 430®: STRONG 90-degree teeth for superior grip and longevity
- FORGED high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort
- 100% MADE IN USA
Get even more leverage from the ergonomically designed offset head of the GRIPLOCK® Tongue and Groove Pliers. A special jaw design allows it to grip down on many shapes for added versatility. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure and laser-hardened teeth to provide a better, longer lasting grip. GRIPLOCK® Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
- SPECIAL GRIPLOCK® JAW design and ergonomic offset head accommodates many shapes with greater leverage
- Patented SAFE-T-STOP® feature prevents finger pinch
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG laser-hardened teeth for superior grip and longevity
- FORGED high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention.
- CHANNELLOCK BLUE® grips for comfort
A convenient assortment of popular CHANNELLOCK® tools. A perfect gift for people that know what real work is all about. The CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are the tool every home and garage needs. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, and right angle teeth to provide a better, longer lasting grip.
FEATURES:
- Set Includes: 4.5", 6.5" 12" & 16" Tongue & Groove
- STRONG Right angle teeth grip better and last longer
- Undercut tongue & groove design won't slip
- PERMALOCK® fastener eliminates nut and bolt failure
- CHANNELLOCK BLUE® grips for comfort
The CHANNELLOCK® 6pc Standard Screwdriver Set offers advanced performance features to conquer the toughest jobs. Specifically designed to fit the needs of today’s trades professional, CHANNELLOCK® screwdrivers are equipped with precision-machined vacuum heat-treated tri-alloy steel blades for durability and have a non-porous, coated finish for lasting corrosion resistance. The high-torque, reinforced handles include a part indicator for easy identification, and tips are precision-machined for a proper fit on fasteners with superior control. Exceed the expectation with CHANNELLOCK® Professional Drivers made in the USA.
- SET INCLUDES: PHILLIPS #1 x 4”, #2 x 4”, #3 x 6” | Slotted 3/16 x 4”, 1/4 x 4”, 5/16 x 6”
- REINFORCED 3-sided High-Performance Handle is heat-stabilized and modified to provide excellent abrasion protection, impact resistance, and chemical tolerance
- PRECISION-MACHINED tips engage fasteners with a reliable and secure fit
- RUGGED TRI-ALLOY U.S. STEEL Blades are Vacuum heat-treated, balancing hardness and resilience for ultimate performance
- VIBRANT Polished Shaft provides a non-porous finish and coated for corrosion resistance
- INDICATORS for product type and size are heat stamped for easy identification
- MAGNETIC TIP for fastener control
- CHANNELLOCK BLUE solid grip reduces fatigue and maximizes torque
- 100% MADE IN USA
CHANNELLOCK® High Leverage Diagonal Cutting Pliers feature Xtreme Leverage Technology (XLT™) which makes cutting easier than ever. By positioning the rivet closer to the cutting edge, considerably less force is required to cut than other high leverage designs. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge for increased strength and longevity. These pliers also offer a slimmer, lighter, and better-balanced design for maximum performance and accessibility. CHANNELLOCK® Diagonal Cutting Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
- XTREME LEVERAGE TECHNOLOGY (XLT™) increases performance and reduces hand fatigue
- LASER heat-treated cutting edges perform better and last longer
- PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort
- 100% MADE IN USA
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
- The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG 90-degree, laser-hardened teeth for superior grip and longevity
- FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
- UNDERCUT tongue & groove won’t slip
- CHANNELLOCK BLUE® grips for comfort
ND-7CB CHANNELLOCK Code Blue Nut Driver Set Sizes: 11/32" to 7/16" . This nut driver set features seven pieces that are ideal for for screwing in nuts. This set features multiple socket sizes to guarantee a fit for a wide range of nuts. These nutdrivers also features a code blue grip which guarantees a strong grip and prevents slipping. Opening Size: 11/32 in, 1/2 in, 1/4 in, 3/16 in, 3/8 in, 5/16 in, 7/16 in Opening Type: Hex Shank Length: 3 in Shank Type: Hollow Shaft Overall Length: 7 1/2 in Shank Material: Chrome Vanadium Steel Measuring System: Inch
FEATURES:
- Blue grips for comfort
- Spring loaded for ease of use
- The use of Xtreme Leverage Technology means considerably less force required to cut than traditional high leverage
- High carbon steel for superior performance on the job, and specially coated for ultimate rust prevention
- Precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life.
- Use for working on electronics, emergency roadside repairs, or as a multi-purpose work light.
- Magnetic bottom allows attachment to any ferrous surface; hook allows for hanging.
- Shock resistant ABS plastic housing with molded LED protective cage.
- Ultra bright 24 SMD LED bulbs provide plenty of light for any work space. Light output: 150 Lumens.
- Uses 3 AAA batteries (included).
- Designed for reaching confined areas
- Long chain nose with fine serrated jaws to easily make wire loops and bends
- Electronically induction hardened hand-honed, long lasting cutting edges
- Manufactured from forged alloy tool steel for durability
- Polished head resists rust and corrosion
FEATURES:
- 7-1/4" contoured plastic handle
- Includes nylon, brass, and stainless steel brushes
*Easy to use and cost-saving: the tool is small in size, can be carried around, can replace the blade with a simple button, and does not use electricity and compressed air, saving energy, thereby saving costs.
Comes with 2 interchangeable blades.
- 1 B10 for deburring steel, copper and aluminum
- 1 B20 for deburring brass and cast iron.
- Swivel head
- Push button blade storage & release.
- 5" plastic handle ensures safer, easier cutting action.
Made in U.S.A. 
- High Quality, Industrial Grade, Professional Tools.
- Made with Eklind® Alloy Steel.
- Color coded RED for INCH.
- Color coded BLUE for METRIC.
- Plastic holder firmly retains each key in a size marked hole.
Includes 2 Sets
- 13 pc Long Series Hex-L® Key Set with Holder. Inch Sizes: .050
- Inch Sizes: .050-3/8”
- 9 pc Long Series Hex-L® Key Set with Holder
- Metric Sizes: 1.5mm-10mm
- 150 Grit file
- Blister Packed
- Designed for fast cutting and long lasting use
- Package Dimensions: 33.02 L x 3.048H x5.08W(centimeters)
These stainless steel dental picks are excellent for fine scraping, cleaning, scribing, and shaping tasks.
This 4 piece set of dental tools has a variety of tips shaped to get into odd corners, crevices, and other hard to reach areas.
Dental picks can be used for activities including hobby projects, gluing, removing old paint from crevices, fossil preparation, circuit probing, micro positioning, O ring removal, and a myriad of other activities.
GENERAL 1/4" CAP. PLAIN TAP WRENCH
Our standard Tap Wrenches are perfect for creating straight and accurate thread holes in your work piece.
- The sliding T-Handle provides a large gripping surface and allows for maneuverability and leverage in tight spaces.
- This versatile tool can also be used with reamers, drill bits, screw extractors and other hand-turned tools.
Features & Benefits :
- Self-centering hardened steel jaws and knurled chuck sleeve
GENERAL TOOLS 12" Flexible Steel Rule MADE IN USA
Industrial precision rules are made with etched fine black graduation for easy reading and long life.
- On 1st side 16th, 32nd, 64mm and 5mm, 2nd side is 8th, 16th, 32nd and 64th
- Ultra fine etched black graduations
- This line gauge features a polished stainless steel finish
- Overall length of 13 inches and width of 7/8 inches
- Ruler also features a hanging hole
- Flexible
The #888 Dowel Centers, Eight Assorted are ideal for locating, transferring and matching dowel holes.
- For fast, easy, accurate doweling.
- Made of nickel-plated steel.
- Each boxed set has 2 each 1/4",5/16",3/8" and 1/2" dia. sizes.
87 General Automatic Center Punch (pocket size with clip) Adjustable,high-energy impact. Aluminum body and replaceable steel point. Reg: $16.55
FEATURES:
- LIGHTWEIGHT ALUMINUM BODY: This pre-drilling leather punch tool can scribe, stake, and prepare nail or screw holes. It's easy to use, and the one-handed spring tension adjusts for light or heavy strokes and marking on wood and metal surfaces.
- HARDENED STEEL POINT: Fabricated from durable aluminum alloy, our convenient metal punch tool has a conical-shaped steel tip that allows you to safely drill holes at the exact location without slipping and damaging the work surface.
- ONE-HANDED SPRING IMPACT: Ideal for metal workers, machinists, automotive repair professionals, and DIYers, this spring-loaded center punch has an automatic mechanism that strikes with downward pressure so that you don't need a hammer.
- KNURLED FINGER GRIP: Allows a sturdy grip, easy handling, and less slippage, avoiding potential injury. Add this product to your mechanic accessories, metalsmithing tools, and other utility and hardware essentials.
- GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized precision tools for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity.
- Extends the life of broken hacksaw blades
- Designed for the close quarter sawing of wood, paneling, pipes and tubing, wallboard, and plastic
- Single end design is useful for cutting in tight corners
- Removes pipe broken off at fitting
- Firm grip plastic handle with 10" medium tooth blade
- Uses standard hacksaw blades
69 GENERAL DIAL WIRE STRIPPER MADE IN U.S.A. The Dial Wire Stripper allows you to easily remove the insulation from electrical wire before soldering or crimping. The tool features a rotating dial with stripping positions for eight wire gages from 12 to 26 gage. When not in use, the tool is equipped with a jaw lock to protect the hardened cutting edges. General Tools 69 Dial Wire Stripper Features: • For removing insulation from electrical wire • Works with eight wire gages: 12, 14, 16, 18, 20, 22, 24 and 26 • Rotating dial allows effortless changes between wire sizes • Hardened steel cutting jaws for clean wire cuts • Spring-opening jaws for repetitive stripping and cutting • Jaw lock protects cutting edges when tool is not in use • Vinyl cushion handles. • Dial wire strippers • Ideal for removing insulation from electrical wire • Rotating dial allows effortless changes between wire sizes • Spring opening jaws for repetitive stripping and cutting • Jaw lock protects cutting edge when tool is not in use
GENERAL TOOLS Heavy Duty Tube Cutter 
The #125 Heavy-duty Tubing Cutter can slice through copper, aluminum, brass, thin-wall tubing and stainless steel. Tubing O.D. range: 1/4 to 1-5/8 in.
- Wide, hardened, flared, grooved rollers allow cuts close to a flared end to avoid tube replacement in existing installations
- Full-size, fold-out reamer with two cutting edges for deburring pipe
- Large fluted knob increases applied torque
- New contoured shape and comfort grip
- Full-size wheel is made of bearing tool steel and replaceable (#RW121/2 or #RW122)
- Storage space in handle for extra wheel
839 General Magnetic Torpedo Level Made in U.S.A. Large reversible vials for reading top,bottom or side. Magnetic working edge. V-groove working edge for use in pipes. Internal aluminum frame,unbreakable end plates.Reg: $24.23
The #842 Precision Pencil Compass can mark a circle of specified size around a point.
- Carpenter-quality; made of durable die-cast rust-proof metal
- Adjustable spring tension
- Scribe guide for edge marking
- For use with pencil (included) or slim ballpoint pen
The General Tools 807 Ratcheting Offset Screwdriver with 2 Slotted Blades is ideal for use where screws are concealed or obstructed, when leverage is required, or where turning space is limited. The drive rotation can be reversed instantly and the blades are constructed out of machined, ground, and hardened tool steel.
For hard-to-reach screws. Fit's 1/4" and 3/8" straight blades.
- Drive rotation can be reversed instantly
- Blades are made of machined, ground and hardened tool steel
- Meets U.S. Government Specification GGG-S-1408
- Ratchet sets instantly to forward or reverse position.
Specifications
- Blade types/sizes: 1/4 in. and 3/8 in. slotted
- Drive length: 4 in.
Includes
- Ratchet handle and two blades
GENERAL TOOLS 5 pc. Shower Valve Wrench Set Made in U.S.A.
The General Tools 188 Shower Valve Wrench Set features five professional quality wrenches with two distinct socket sizes per wrench in a double-ended design. With an elongated body, the Wrenches are ideal for use on sunken valves and tile-covered shower walls. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver. The set comes with a bar handle for turning the wrenches and a wire holder for storage.
FEATURES:
- Five-piece set comes with five double end wrenches, bar handle and a bar wire holder for easy storage
- Sizes - 21/32 x 27/32, 29/32 x 31/32, 1-1/32 x 1-3/32, 1-5/32 x 1-9/32, 1-11/32 x 1-7/16
- Longer length for access to recessed valve stems in tile covered walls
- The hex-shaped bodies allow for use with an adjustable wrench
- There is also a hole near each end of the wrench for turning with a long screwdriver
Sizes include: 21/32",27/32",29/32",31/32",1 1/32",1 3/32", 1 5/32",1 9/32",1 11/32",and 1 7/16". Longer length for access to recessed valve stems in tile covered walls.
GENERAL TOOLS TUBING CUTTER
General Tools professional tubing cutter is our most comfortable and easy-to-use model, designed for a lifetime of dependable use. Smooth-action retractable jaws expand for tubing sizes from 1/8 to 1-1/8 In., and up to 3/16 In. in thickness. The cutter easily slices through copper, aluminum, brass, stainless steel and other tin-wall tubing. Uses the RW122 cutting wheel made from bearing tool steel for superior cutting power. Includes a retractable reamer with dual cutting edges.
FEATURES:
- Contoured head with comfort grip for easy turning
- Knob contains storage compartment for extra cutting wheels - for copper, aluminum, brass and thin-wall stainless steel up to 3/16 In. thickness.
- Cutting wheel is made from bearing tool steel for maximum durability, full-size, fold-out reamer with dual edges, replacement wheel RW122.
- Grooved rollers accept flared pipe ends to provide cuts directly below the flare
- Alloy Tool Steel for Strength and Durability
- Precision Cut for Long Life
- Durable Plastic Handle for Comfortable Grip and Less Fatigue, with Large Eyelet for Convenient Storage
- For General Purpose Use, Finishing Work and Draw Filing
- Limited Lifetime Warranty
E-8C GREAT NECK 8" LINESMAN PLIERS WITH INSULATED HANDLES Product Description GreatNeck E8C 8 Inch Electrical Pliers Carded GreatNeck E8C 8 Inch Electrical Pliers Carded Features: • Vinyl grip handles, extra sharp honed cutting edges, rib grooved joints • Drop-forged construction • 8" • Carded .Lifetime warranty!
- Twisted wire handles are sturdy, yet flexible to work in confined areas.
- 12" overall length with 4" of bristles on all sizes.
- Loop ends for hanging
Includes:
- 1/4", 5/16", 3/8", 1/2" and 3/4" diameters with brass bristles.
- 1/4", 5/16", 3/8", 1/2" and 3/4" diameters with Stainless Steel bristles.
12" Tongue and Groove Joint Plier
Description:
Unique tongue and groove offset jaw design allows for use on all kinds of objects. Drop forged, heat treated steel.
Fully polished head resists rust and corrosion. Precision machined jaws provide a secure grip.
Double dipped cushion grip handles provide a comfortable hold during use.
Use for intricate jobs with limited working space where ordinary Pliers cannot reach. Drop forged, heat treated steel.
Nickel plated to resist rust and corrosion
Includes:
1 Pc. 4" Locking Pliers
1 Pc. 5" Long nose locking Pliers
21320 GRIP 5 pc Ball Joint & Tie Rod Kit .Use to separate ball joints and tie rods found on automotive and light trucks Drop forged, chrome vanadium steel forks and handles Piloted handles act as shock absorbers to protect handle threads Includes - 1 pc 1-1/16″ wedge opening tie rod spreader, 1 pc 15/16″ jaw opening ball joint separator, 1 pc 1-1/8″ opening pitman arm wedge, 1 pc 8″ hammer handle, 1 pc air hammer handle
- Ideal for removing trim, emblems, or other disassembly work without damaging delicate surfaces.
- Strong glass filled nylon construction.
- Includes the following types: straight wedge, offset v-notch, and straight v-notch.
- 7 pieces total in set.
The IRWIN® HANSON® T-Handle Ratcheting Tap Wrench has a three position gear box for quick, efficient ratcheting action. The Tap Wrench is designed for use with taps, reamers, screw extractors and other tools with a square shank.
- Three position gear box for quick, efficient ratcheting action
- Designed for use with taps, reamers, screw extractors and other tools with a square shank
- 12in. Extended Length For 1/4 to 1/2in. (6mm to 12mm)Taps
- Three position gear box for quick, efficient ratcheting action
- Designed for use with taps, reamers, screw extractors and other tools with a square shank
- Limited Lifetime Warranty
SPECS:
- Squares are used as measurement tools and for marking 90° angles
- Squares feature a rust-proof, stainless-steel blade
- Black, precision-etched scales are easy to read
- High-impact ABS handle for durability
- 8" length
- Hardened teeth are designed to grip from any angle.
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
- Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
- Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
- Classic trigger release provides maximum locking force.
- Convenient wire cutter included
IRWIN VISE-GRIP Original Locking C-Clamp, Regular Tips, 24-Inch (275)
FEATURES:
- Versatile wide-opening jaws clamp a variety of shapes.
- Guarded trigger provides quick release while helping prevent accidental release
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
- Adjust pressure and work fit with turn screw that stays adjusted for repetitive use.
- Turn screw to adjust pressure and fit work.
- Stays adjusted for repetitive use
SPECS:
- Size: 24" / 605 mm
- Jaw Capacity: 12-1/2" / 317 mm
- Overall Length: 24"
- Material: Steel
- Model: 24R
** Failure to follow warnings may result in bodily injury.
Lightweight Heavy Duty Dust Pan
16" wide,10" deep,9" handle.
16"" METAL JUMBO DUST PAN
Heavy gauge steel construction.
Double riveted tubular steel handle lifts heavy loads. Duable electroplate finish resists rust and corrosion.
83-648 Magnet With Flex Handle Made in U.S.A.
11012 MAGNETIC PEN PICK UP TOOL 1 1/2 LBS CAPACITY . Shirt pocket-sized, easy-to-carry magnetic pen with BIG magnetic pulling power Solid aluminum barrel with 3/16" steel pickup tips at each end for double the utility Great for removing metal fragments & shavings from nut-drivers, small screws & micro-parts Each tip can lift over 1-1/2 lbs of metal, chrome finish for easy material removal; '+' & '-' ends Spring-steel pocket clip keeps pen in place; 4-1/4"-length, 3/8" barrel diameter, 2 oz
5218 Magnetic Welder's Holder(can lift a maximum of 25 lbs). Special magnet will hold any iron objects at 45 degree,90 degree or 135 degree angles. Freeing hands from welding,soldering,assembly and other metal work.
Mercer Abrasives 4 pc File Set .
The perfect set for the ‘Do-It-Yourself’ market.
Packaged in a plastic pouch.
Contents:
- 8″ 4-in-1 Shoe Rasp #BSR08
- (1) 6″ Slim Taper #BTRS06
- (1) 6″ Round #BROB06
- (1) 8″ Mill Bastard #BFMB08
- Rubber Tips
- A versatile tool for clamping a wide range of surfaces
- Cam action clamping
- For delicate clamping of plastics, wood or metal while bonding or fastening.
83-649 Mirror With Flex Handle Made in U.S.A.
• High carbon steel files
• These files restore damaged external threads on studs, bolts, screws, plumbing pipes and pipe fittings
• Restores rusted or corroded fasteners
• Doubles as a screw pitch gage
• Black oxide to prevent rust
• High carbon steel files
• These files restore damaged external threads on studs, bolts, screws, plumbing pipes and pipe fittings
• Restores rusted or corroded fasteners
• Doubles as a screw pitch gage
• Black oxide to prevent rust
• High carbon steel files
• These files restore damaged external threads on studs, bolts, screws, plumbing pipes and pipe fittings
• Restores rusted or corroded fasteners
• Doubles as a screw pitch gage
• Black oxide to prevent rust
Used to Separate the Pitman Arm from the Center Link-
Heat-Treated Alloy Steel
-
Tapered Fork End Has a 1-1/8" Opening
-
Rust Resistant Finish
PROFESSIONAL TIRE REPAIR KIT
- Repairs tires for vehicles, ATVs, hand carts, wheelbarrows
- Repairs steel-belted radial tires
- Plugging material is threaded into tool's open needle eye and inserted into puncture to seal.
- String plugs are 4in. long
Includes:
- T-handle insert tool
- T-handle spiral probe tool
- 2 hex keys
- 30 string plugs
The Titan Ratcheting PVC pipe cutter cuts PVC or rubber hose up to 1 5/8 in. (41 mm) diameter. It is safe to use and cuts with ease. This PVC pipe cutter has ratcheting mechanism for better leverage, with a stainless steel blade that is made to last no matter how tough the job.
- Allows for the easy cutting of PVC pipe
- Cuts up to 1-5/8 in. (41 mm) Dia.
- Features a flip catch for enhanced safety
- Bright yellow grips in color for recognition
- Flip catch holds handles closed for safety
- Ratcheting PVC pipe cutter
Smooth Heavy Duty Caulk Gun by S&G Tool Aid®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of durability and strength needed to provide long-lasting service life. Superior in functionality, it will help you make any job easier and faster.
- Push rod design quickly and easily dispenses a smooth flow of sealants and compounds from 1/10 gallon
cartridges.
- Completely empties cartridge.
- Quick release trigger removes pressure and stops material flow.
- Epoxy coated steel and die cast construction.
- Durable and dependable.
17500 S & G TOOL AID PAIL PUMP FOR 5 & 6 GALLON PAILS . Fits all 5 and 6 gallon pails. Easily dispenses fluid with lift action. For use with all non-corrosive liquids. TeflonÆseal designed for use with thinner. Fully plated, steel construction. Dependable and long lasting.
- Fully plated, steel construction
- Easily dispenses non-corrosive liquids with lift action
- Seals designed for use with thinner
- Fits all 5 and 6 gallon pails
- Easily dispenses fluid with lift action.
- For use with all non-corrosive liquids.
- Teflon® seal designed for use with thinner.
- Dependable and long lasting.
SG 87250 S&G TOOL AID DUAL-TEMP HEAT GUN .
This is an inexpensive, high performance, hot air source that delivers concentrated, heated air to the job. Use in autobody, automotive, industrial, marine, home, farm and numerous other applications. Has two heat selections: 750_F and 1,000_F. Only weighs 1.2 pounds. Operates on 120 volts, 10 amps, 1,200 watts. Contains no asbestos. U.L. and CSA listed. Full instructions provided for most all applications. Special purpose nozzles are available for easy attachment.
7075 Shoe Handle Wire Brush . 3 rows wide,16 rows long.Product Description The 7075 Shoe Handle Wire Brush removes rust, paint and dirt to prepare rough surfaces for paint and other finishes. The brush consists of a rugged 10 in. hardwood shoe handle with tempered carbon steel bristles and a 4x16 wire bristle configuration.
Metric Sizes Included:
- 30, 31, 32, 33, 34, 35, 36, 38, 41, and 42mm
- Constructed of carbon steel for strength and durability
- 12-Point box end delivers sufficient amount of torque to tighten or loosen bolts while preventing rounding
- 15-Degree angled open end increases engagement with fastener in tight spaces and 15-Degree offset box end provides clearance for your hands
- Stamped size markings for easy identification
- Includes reusable storage rack
16137 TITAN 11 pc Tamper Resistant Torx Hex Bit Socket Set Sizes: T8 to T55 TITAN professional tools can be counted on to provide a professional grade tool at a fair price. They are designed and built to provide a lifetime of quality for the professional and non-professional alike. S2 alloy steel bits for strength and durability For use with pin type tamper resistant 5-lobe fasteners Handy magnetic holder sticks to most metal surfaces 1/4" and 3/8" drive bit holders 11 bits: TP8, 10, 15, 20, 25, 27, 30, 40, 45, 50 and 55
TITAN 13 pc External Star Socket Set E-4 to E-24
- Gold aluminum anodized socket rail
- Crv construction
- Magnetic base
-
Chrome Vanadium Steel
Sizes includes:
- 1/4" DR: E-4, E-5, E-6, E-7, E-8
- 3/8" DR: E-10, E-12, E-14, E16
- 1/2" DR: E-18, E-20, E-22, E24
16038 Titan 13 pc Metric Impact Hex Bit Set 1/4" & 3/8" Drive Sizes: 1.5mm to 10mm . Impact Grade Metric Hex Bit Set 13pc Includes: (8) 1/4" Bits: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm & 6mm (3) 3/8" Bits: 7mm, 8mm & 10mm (1) 1/4" Drive Bit Holder (1) 3/8" Drive Bit Holder
Titan 13 pc SAE Hex Bit Socket Set
- Set includes: (2) 1/2'' drive, (5) 3/8'' drive, (6) 1/4'' drive bits, and anodized aluminum storage rail
- 1/2'' drive bit sizes: 7/16 and 1/2'' and 3/8'' drive bit sizes: 3/16, 7/32, 1/4, 5/16, 3/8'' and 1/4'' drive bit sizes: 5/64, 3/32, 7/64, 1/8, 9/64 and 5/32''
- S2 alloy steel bits for strength and durability
- Anodized aluminum magnetic socket rail sticks to ferrous metal surfaces
- Chrome vanadium sockets with corrosion-resistant plated finish
Magnetic Sizes: 1/16" to 7/16"
These TITAN Bit Sockets are designed and built to provide a lifetime of quality for the professional and non-professional alike.
- 1/4" and 3/8" drive bit holders
- 11 bits, 1/16, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 and 7/16"
- Chrome vanadium socket S2 alloy steel bits for strength and durability.
- Size engraved for easy identification Multiple sizes for a variety of applications
- For use with pin type tamper resistant hex fasteners
- Handy magnetic holder sticks to most metal surfaces
15210 TITAN 3 pc 3" Locking Socket Adaptor Includes: 1/4",3/8" & 1/2" Drive . TITAN professional tools can be counted on to provide a professional grade tool at a fair price. They are designed and built to provide a lifetime of quality for the professional and non-professional alike. Impact grade Includes 1/4, 3/8, and 1/2" Drive 3" length<
- Includes TR Star, TR Metric Hex, TR SAE Hex, Spanner, Triwing, and Torq Bits
- 2-1/2 Inch magnet bit holder
- It has 4, 6, 8 and 10 spanner bits
- 2, 2.5, 3, 4, 5 and 6 millimeter metric tamper
INCLUDES:
- 2.5" magnet bit holder.
- 7 tamper resistant star bits T-8 thr T-40.
- 12 tamper resistant hex bits 5/64" thru 5/32" & 2 thru 6 mm.
- 12 spanner b
- 3 wing & 4 Wing bit
TITAN 4 pc Getta-Grip Plier Set
Includes lineman, diagonal, slip joint and long nose pliers.
Oversized Ergonomic Grips Provide Extra Comfort and Reduced Hand Fatigue
Material: Chrome-vanadium steel Plier Finish: Chrome
Handle Material: Thermoplastic Rubber Handle Color: Black/Yellow
Titan 4 pc Socket Adaptor Set Chrome Vanadium Steel Construction Features: 4 Piece Socket Adapter Set Chrome Vanadium steel construction Sizes Include: 1/4" Drive Female to 3/8" Drive Male 3/8" Drive Female to 1/4" Drive Male 1/2" Drive Female to 3/8" Drive Male 3/8" Drive Female to 1/2" Drive Male
TITAN 4PC JUMBO BOLSTERED PICK & HOOK SET
♦ 1 each: straight, 90 degree, offset & curved
♦chrome-vanadium steel shafts
♦Comfortable TPR grips.
Titan Jumbo Bolstered Pick and Hook Set - 4 Piece features a 4 piece jumbo bolstered pick and hook set. It has chrome vanadium steel shafts with comfortable TPR grips. It has 4 picks: straight, 90 degree, off set and curved.
16132 TITAN 8 pc 1/2" Drive SAE & Metric Hex Bit Socket Set Anodized magnetic aluminum socket rail S2 alloy steel bits for strength and durability Rust resistant finish Exceeds ANSI standards Sizes include:9/16”, 5/8”, 11/16”, 3/4”, 14mm, 15mm, 17mm, 19mm
TITAN 9 pc External Star Socket
Set Sizes: E5 thru E16 .
Contain 1 each of the following: 1/4" Dr.: E5, E6, E7, E8, 3/8" Dr.: E10, E12, E14, E16, 1/4" (M) x 3/8" (F) Socket Adapter
- For use with both internal and external snap rings
- Includes 4 Interchangeable tips: 2 straight, 1-90 DEG. And 1-45 DEG
- Comfort grip handles
- Effective range: 10 - 50 mm (3/8" x 2")
- Practical, efficient tools to get your job done right
- Made to ensure maximum longevity and high wear resistance
- Ultimate in reliability, convenience, and ease of use
Titan Precision Oiler is a highly accurate lubrication tool intended for anyone working with small mechanical parts. The needlepoint tip allows for the precise placement of oil in confined areas.
The smooth thumb actuator lets you control the release of lubricant from the reservoir in small droplets. In addition, the Precision Oiler includes a screw-on cover and pocket clip for use on the go.
- For precision oiling in tight and hard-to-reach places and machines
- Smooth actuator allows for greater control and placement of lubricant
- Aluminum construction
- Protective screw-on cover prevents leakage
- Convenient pocket clip
17502 TOOL CHOICE 10PC FOAM PAINT BRUSH SET . Foam Brushes Plastic Handles 4 - 1 inch Brushes 3 - 2 inch Brushes 2 - 3 inch Brushes 1 - 4 inch Brush
Description
• Utility punch and scriber is a Combination of Punch & Scriber.
• Utility punch is used for punching hole or as a Scriber in sheet metal.
• Hexagonal Body for comfortable grip.
• Ideal for Punching Holes in sheet metal.
• Can also be used as a Scriber.
• Hardened Point.
• Utility Punch made of Tool Steel.
Can ream and smooth inside and outside of conduit.
Ideal for liquid tight fittings and caps.
A simple push of a button adjusts the lower jaw twice faster than traditional groove joint pliers.
Multi-Groove Ratcheting System has twice the groove positions of other groove joint pliers, for precise positioning to grip any type of surface. Anti-pinch, non-slip Pro-Touch Grips provide comfort, control, and less hand fatigue.
Right angle teeth grip in all directions for maximum bite.
Metal Injection Molding process for precision parts delivers strength and exceptional performance.
IRWIN VISE-GRIP Locking C-Clamps w/ Swivel Pads
18" Model: 18SP
Features:
- Wide opening jaw provides greater versatility in clamping a variety of shapes.
- Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface.
- One hand operation to lock and unlock.
IRWIN VISE-GRIP Locking C-Clamps w/ Swivel Pads
24" Model: 24SP
Features:
- Wide opening jaw provides greater versatility in clamping a variety of shapes.
- Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface.
- One hand operation to lock and unlock.
The Original™ Locking C-Clamps with Swivel Pads- 4" Model: 4SP
Features:
- Wide opening jaw provides greater versatility in clamping a variety of shapes.
- Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface.
- One hand operation to lock and unlock.
- Long, straight nose provides easy access in narrow, hard-to-reach places.
- Ideal for precision work and hobbies, includes convenient wire cutter
- Ideal for tightening, clamping, twisting and turning
- Turn screw to adjust pressure and fit work; Stays adjusted for repetitive use
- High-grade heat-treated alloy steel construction
- Hardened teeth for superior gripping.
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
- Jaw capacity is 1-5/8"
- Meets or exceeds ANSI specifications
The Original™ Curved Jaw Locking Pliers with Wire Cutter Features:
- Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
- Classic trigger release provides maximum locking force.
- Convenient wire cutter included
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
- Hardened teeth are designed to grip from any angle.
- Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
IRWIN VISE-GRIP Locking C-Clamps w/ Swivel Pads
6" Model: 6SP
Features:
- Wide opening jaw provides greater versatility in clamping a variety of shapes.
- Swivel pads hold tapered work, awkward fabricating jobs and delicate projects without damaging the work surface.
- One hand operation to lock and unlock.
- VERSATILE: Wide-opening jaws provide greater versatility in clamping a variety of shapes
- SAFE SWIVEL PADS: Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
- ADJUSTABLE PRESSURE: Turn screw adjusts pressure to fit the job at hand and stays in the adjusted position for repetitive use QUALITY & DURABILITY: Constructed of high-grade, heat-treated alloy steel for durability
- MAXIMUM LOCKING FORCE: Classic trigger release designed to provide maximum locking force and securely hold your work
Pliers are drop forged and heat treated.Handles are designed with high visibility cushion grips making them comfortable and easy to locate. Pliers are made with polished heads and precision machined jaws.Illinois Industrial Tools
This all-steel, heavy-duty Chipping Hammer features a hardened head for long life. The spring handle is specially designed to absorb the shock of contact while cleaning and chipping welding debris. Straight head design with replaceable wire brush and durable handle.
- Shock absorbing spring handle design
- Durable hardened head construction for lasting use
FEATURES:
- Durable aluminum handle and steel cable pull tool
- Cuts caulking compound around windshield fast and easy
- Pull handle provides additional leverage
- Includes a strong tempered steel blade, sharpened to a fine cutting edge
