Pro-Snip model 103G 10" straight cut and wide curve aviation tin snip.
- 1pc Plunge cut blade - Width: 20mm(3/4”) Total length 90mm
• 1pc Plunge cut blade - Width: 32mm(1-1/4”), HSS BIMETAL(M42+D6A), Total length: 90mm
• 1pc Scraper blade - Width: 52mm (2”), Total length: 90mm
• 1pc Segment saw blade - Diameter: 87.5mm (3-7/16“),
Features:
• With heat treatment
• Black painting surface
• Universal compatible quick release hole type
810R LENOX 8" x 10 TPI BI-Metal Reciprocating Blade
-
- Bi-Metal construction
- Precision milled teeth
Set includes:
• (2) Controured Tip
• (2) Spoon Tip
• Lengths: 5-1/2-Inch and 8-1/2-Inch
• Comfort grip handle and shaft is constructed of Cr-V
• Allows for easy removal of seals and o-rings without damaging the seal or the finished surface
Pro-Snip model 101G 10" Left cut aviation tin snip. Straight cuts and tight curves left.
High Grade Heat Treated Alloy Steel Wide Opening Locking C-Clamp With Regular Tips
IRWIN VISE-GRIP The Original Locking C-Clamp has a 4" jaw capacity for clamping a wide variety of shapes securely. The classic guarded trigger release provides maximum locking force for these sturdy heat-treated, alloy steel clamps.
- 4"-wide jaw opening capacity provides versatility in clamping a variety of shapes
- Turn screw to adjust pressure and fit work
- Stays adjusted for repetitive use
- Constructed of high-grade heat-treated alloy steel for durability
- Classic trigger release designed to provide maximum locking force
- IRWIN locking clamp has wide-opening jaws for greater versatility in clamping a variety of shapes
- Locking clamp uses a turn screw to adjust pressure and fit work; stays adjusted for repetitive use
Features:
- Wide-opening jaws provide greater versatility in clamping a variety of shapes
- Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
- Classic trigger release designed to provide maximum locking force
- Ideal for drilling in mild steel where extra length for reach is required
- 135 degree split point for self-centering and reduces thrust
- Black oxide surface treatment that is abrasion resistant, reduces chip welding and improves chip flow
- Manufactured to Aerospace Standard 907
- Sizes smaller than 1/16 and #52 have the 118 degree standard point
5/16" High Test Clevis Grab Hook Grade 43
Working Load Limit: 3,900 lbs.
FEATURES:
- Prevents chain from slipping through the hook
- Includes a safety gate for added security
- Use on Grade 43 High Test or lower grade chain
- Prevents chain from slipping through the hook
- Includes a safety gate for added security
- Use on Grade 43 High Test or lower grade chain
- Zinc-plated for durability
- Made for farm, industrial and heavy duty applications
�Heat treated pins
�Hooks are heat treated and tempered
�Designs ultimate strength equals 3 times working load limit, matching NACM specifications
�Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel
�Not to be used for overhead lifting
**Grade 43 “High Test” Hooks and chain is on of the the most popular hooks used in light weight tie down and towing applications.
DESCRIPTION:
Great for hand trucks, garden carts, generators, pressure washers etc. Polyurethane foam needs no air, and will not puncture like air tires. Never goes flat.
Eliminate the problems of damaged, punctured, or flat tires associated with traditional air tires.
- Replacement tire for hand trucks, wagons, dollies and carts
- Ball bearings for smooth, quiet operation
- Not for highway use
- 325-lb. Load capacity per tire
- 3.5" Metal Hub
- 5/8" Hole (Fits all 5/8" axles)
- Constructed from a proprietary formula of Micro-Cellular polyurethane
- Light weight
- Ball Bearing for smooth and quiet operation
33/64" Cobalt Drill Bit with 1/2" Shank
FEATURES:
- m35 5% cobalt drills are are effective in drilling tough, high tensile strength materials
- 135° split point tip for fast penetration and accurate drilling
- For use in hard materials such as inconel, stainless steel and titanium
- Display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed
- Reduced Shank Drills expand the size range capacity of a portable drill chuck
- Common flute and overall length for minimal adjustment during tool changes
- 3" Flute Length, 6" Overall Length, 1/2" Shank
SPECS:
Size:
|
33/64
|
Material:
|
Cobalt
|
Finish:
|
Gold
|
Flute Length:
|
3
|
Overall Length:
|
6
|
Shank Size:
|
1/2
|
Shank Type:
|
Round
|
Style:
|
Reduced Shank
|
Cutting Angle:
|
135
|
Point Type:
|
Split Point
|
Number of Flutes:
|
2
|
Cutting Direction:
|
Right Hand
|
Decimal Equivalent:
|
0.5156
|
Metric Equivalent:
|
13.09624mm |
The Titan Tools 16235 90 Degree Right Angle Drill Attachment fits any standard drill to convert it into a right angle tool for those hard-to-reach areas, featuring a 1/4" hex shank and a 90 degree angled head swiveling handle.
FEATURES:
- 90 degree 1/4 in. bit driver
- 1/4 in. Hex Shank
- 1/4 in. chuck bit holder
- 360 degree swivel handle
- Smooth precision turning during 90 degree position
- Converts a drill into a right angle tool
- Stainless outer housing
- Comfortable grip handle
26 gauge heavy duty insulated copper wire 10 leads with alligator clips in 5 distinct colors Color coded leads allow you to test circuits without crossing wires or causing short circuit
10 leads with alligator clips in 5 distinct colors.
Features:
• Cable length: 34 in
• 26 gauge heavy duty insulated copper wire
• Steel clip nickel plated finish
• Solid bra wire size: 26 AWG
• Set of 10 wires (35cm each)
• 5 colors with booted 1-1/2" alligator clips at both ends
M2 HSS provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.
High Speed Steel TMX Round Tools Bits / Drills Blanks. HSS, Ground, 1/4" diameter x 4" overall length (OAL).
- Hardened and ground to be used as punches, pins and hole checking
Material | High Speed Steel |
Material Grade | M2 |
End Shape | Round |
Width/Diameter | 1/4" |
Height | 1/4" |
Overall Length | 4" |
Ground or Unground | Ground |
Features:
- Made from the Finest Stainless Steel Available
- All Rules Fully Hardened and Tempered
- Precisely Etched, then White Filled for Readability
- Black Chrome Finish
SPECS:
- Length: 12"
- Width: 1"
- Thickness: .035"
- Graduations: 5R (32nds, 64ths, 10ths, 100ths)
- Graduation of the Scale: 5R
- Material: Steel
- Finish: Satin
- Type: Rigid
- Color: Black
- The taps and dies in these sets are made from carbon steel.
- They are an economical choice for internal- and external-threading applications in maintenance operations.
- Designed For Use With Taps, Reamers
- Screw Extractors & Other Tools With A Square Shank
- Adjusted & Tighten To Size By Twisting Knurled Nut
- Machine screw and fractional sizes: No. 4 to 1/2 in.
- Hinged plastic case with removable tray
- Made in USA.
DETAILS:
The SK Fine Tooth Ratchet is quick and easy to use: a thumbwheel reversing mechanism enables easy one-handed change of direction while a free-wheeling back plate allows application of steadying pressure without accidental reversing.
- This side drive not only provides increased strength and reduced fastener damage, but also makes SK sockets effective on partially rounded fasteners.
- The sockets, extensions and adapters also feature the high-polish SuperKrome finish for corrosion and durability.
- Cleverly clipped on the sockets, is the New Fine Tooth Palm Control Ratchet.
- The combination of a 72-tooth mechanism and a compact ratchet head design delivers the accessibility necessary to fit into the tightest of work spaces, great for inaccessible fasteners that don't have a lot of clearance.
- Torque is transferred through 17 teeth during use, with each tooth bearing only 6% of the drive load, providing the strength and durability needed by today's technician.
- Packaged on a compact SureGrip plastic socket rail, which utilizes a spring-load steel ball retention system similar to a ratchet, this convenient rail and clip system makes the set easy to store and easy to carry!
Includes:
- 3/8" Drive 6 Point Standard Chrome Sockets, Sizes: 1/4" to 7/8"
- 3/8"F - 1/4"M Adapter
- Palm Control Ratchet Features the SureGrip Hex Design, which drives the sides of the fastener hex, not the corners.
LENOX® METALWOLF™ WAVE EDGE™ Metal Cutting Reciprocating Saw Blades with up to 50% Longer Life* are optimized for making quick cuts through a wide range of metal types and thicknesses. Revolutionary WAVE EDGE™ tooth form design utilizes a 3-stage tooth formation to improve cutting speed and extend blade life.
Designed specifically for extensive metal cutting, METALWOLF™ Blades feature a Bi-Metal blade design, a spring steel backing, and a high-speed steel cutting edge to make a strong, flexible, quick cutting and shatter resistant blade ideal for making fast clean cuts in ferrous and non-ferrous metals.
APPLICABLE MATERIALS: THICK METAL, MEDIUM METAL AND NON-FERROUS METAL
FEATURES:
- LONG LIFE PATENTED
- TUFF TOOTH™ DESIGN PROVIDES LONG BLADE LIFE
- EFFICIENT CUTTING – OPTIMIZED FOR SPECIFIC APPLICATIONS
- DURABLE CONSTRUCTION
- SHATTER-RESISTANT
- BI-METAL DESIGN PROVIDES THE FLEXIBILITY AND DURABILITY SINGLE METAL BLADES CAN’T
- POWER BLAST TECHNOLOGY™ INCREASES BLADE LIFE, HIGH SPEED BLASTING ALONG THE CUTTING EDGE STRENGTHENS THE BLADE TO REDUCE BREAKS AND INCREASE DURABILITY
- LONG BLADE LIFE AND INCREASED VERSATILITY – PATENTED T2 TECHNOLOGY REDUCES CUTTING FORCES ON EACH TOOTH AND OPTIMIZES CHIP REMOVAL TO ALLOW EFFICIENT CUTTING IN THE WIDEST RANGE OF MATERIALS
SPECS:
|
|
|
|
|
|
|
|
|
|
11119 HANSON BRAND 10PC. DRILL EXTRACTOR SET MADE IN U.S.A. . High speed left hand cobalt steel drill bits for drilling hardened bolts and studs. Five useful sizes-drills: 3/32" to 3/8" extractors: 5/32" to 5/8". Ideal for removing broken screws & bolts in soft materials. Made in U.S.A. Reg: $36.85
4" Dia. x 1/16" Size x 3/8" Arbor 19,000 RPM Cut Off Wheel, Metal Cutting
- Heavy duty aluminum oxide grain for aggressive cutting action
- Proprietary Material Mix ensures durable long life wheels
- 2 full sheets of fiberglass for durability and safety
FEATURES:
- Coiled nylon air hose for a wide range of commercial and industrial applications
- Yellow nylon tube and cover for resistance to moisture absorption, abrasion, fatigue, and chemicals
- Braided nylon reinforcement for strength
- Temperature range of 32 to 120 degrees F
- Two 1/4" factory-installed, brass male NPT swivel fittings with steel bend restrictors
1/4" NPT x 100 FT Recoil Air Hose Made in U.S.A.
Working length 94 ft
storage length 32"
Oil proof.
Abrasion resistant.
Lightweight.
Reusable fittings.
200 PSI working pressure.
DeWALT Type 1 Metal & Stainless Steel Cutting Wheels
Built for aggressive, fast cuts, DEWALT Type 1 HP Metal Cutoff Wheels feature heavy-duty aluminum oxide grain and a proprietary material mix for long wheel life
FEATURES:
- High performance aluminum oxide grain for long life and high material removal
- High grain concentration for aggressive grinding action and smoother running wheels
- Proprietary material mix ensures durable long life wheels
- 3 full sheets of fiberglass for durability and safety
- Proprietary Material Mix ensures durable long life wheels
Specs:
Wheel Diameter (Inch) | 4 |
Wheel Thickness (Decimal Inch) | 0.0350 |
Hole Size (Inch) | 5/8 |
Abrasive Material | Aluminum Oxide |
Reinforced | Reinforced |
1/8" Cobalt Drill Bit Cobalt drills feature a 135 degree split point for instant penetration without a center punch. These drills are made from a special alloy of M42 steel containing 8% cobalt. The extra thick drill core adds further rigidity and strength. Specs .1250 decimal equivalent 1 5/8" flute length 2 3/4" overall length.
1/8" M35 Cobalt Drill Bit
- m35 5% cobalt drills are are effective in drilling tough, high tensile strength materials
- 135° split point tip for fast penetration and accurate drilling
- For use in hard materials such as inconel, stainless steel and titanium
- Display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed
- Round shank for use in a wide range of tool holding systems
- Jobber (standard) length drill bit
- Pack Quantity: 12
SPECS:
Size:
|
1/8
|
Material:
|
Cobalt
|
Finish:
|
Gold
|
Flute Length:
|
1-5/8
|
Overall Length:
|
2-3/4
|
Shank Type:
|
Round
|
Style:
|
Jobber
|
Cutting Angle:
|
135
|
Point Type:
|
Split Point
|
Number of Flutes:
|
2
|
Cutting Direction:
|
Right Hand
|
Decimal Equivalent:
|
0.125
|
Metric Equivalent:
|
3.175mm
|
Pack Quantity:
|
12
|
3/16" Cobalt Drill Bit -- 6 PACK
FEATURES:
- Cobalt drills are are effective in drilling tough, high tensile strength materials like stainless steel, inconel, and titanium
- 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go "walking" on you.
- Manufactured to Aerospace Standard 907
- Display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed
- Sizes smaller than 1/16 or #52, and larger than 1/2 have the 118 standard point
- m35 5% cobalt drills are are effective in drilling tough, high tensile strength materials
- 135° split point tip for fast penetration and accurate drilling
- For use in hard materials such as inconel, stainless steel and titanium
- Display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed
- Round shank for use in a wide range of tool holding systems
- Jobber (standard) length drill bit
SPECS:
Size:
|
3/16
|
Material:
|
Cobalt
|
Finish:
|
Gold
|
Flute Length:
|
2-5/16
|
Overall Length:
|
3-1/2
|
Shank Type:
|
Round
|
Style:
|
Jobber
|
Cutting Angle:
|
135
|
Point Type:
|
Split Point
|
Number of Flutes:
|
2
|
Cutting Direction:
|
Right Hand
|
Decimal Equivalent:
|
0.1875
|
Metric Equivalent:
|
4.7625mm
|
FEATURES:
- m35 5% cobalt drills are are effective in drilling tough, high tensile strength materials
- 135° split point tip for fast penetration and accurate drilling
- For use in hard materials such as inconel, stainless steel and titanium
- Display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed
- Round shank for use in a wide range of tool holding systems
- Jobber (standard) length drill bit
1/2" Cobalt Drill Bit .5000 decimal equivalent 4 1/2" flute length 6" overall length. Cobalt drills feature a 135 degree split point for instant penetration without a center punch. These drills are made from a special alloy of M42 steel containing 8% cobalt. The extra thick drill core adds further rigidity and strength
SPECS:
Size:
|
1/2
|
Material:
|
Cobalt
|
Finish:
|
Gold
|
Flute Length:
|
4-1/2
|
Overall Length:
|
6
|
Shank Type:
|
Round
|
Style:
|
Jobber
|
Cutting Angle:
|
135
|
Point Type:
|
Split Point
|
Number of Flutes:
|
2
|
Cutting Direction:
|
Right Hand
|
Decimal Equivalent:
|
0.5
|
Metric Equivalent:
|
12.7mm
|
Suggested Pack Quantity:
|
6 |
5C Spin-Index Fixture
FEATURES:
- The 5C Spin Indexer is a quick, simple and accurate device for mill work.
- Mount your workpiece in the 5C Collet and thread it into the indexer.
- Great for miniature work such as clock gears.
- Used on milling machines, grinders and layout work
- Indexing plate is designed with 36 holes in 10, indexing plate is around 5" diameter
- Collet locks in position for retaining accuracy in drilling operation, not enough gripping power for milling work
SPECS:
- Base is grounded and parallel within 0.0005" / 0.02mm
- Centerline to base height: 70 mm/2.76"
- Minimum Indexing Degree: 1 degree
- Indexing Accuracy: 0.0004 TIR
Comes complete with:
- precision ground, 36-position index plate, calibrated in 1 degree increments.
- 5 popular 5C collets
SIZES:
- 1/4"
- 3/8"
- 1/2"
- 3/4"
- 1"
Features:
- Measures Angles From 0-180°
- Used For Drawing Radial Lines, Transferring Angles And Setting Bevels
- Head Measures 3-5/16″ x 2″
- Features 6″ Arm And Knurled Thumb Lock Nut
- Blade Secured Firmly By Lock Nut At Any Angle
- Made Of Tempered Steel With Satin Chrome Finish
- Supplied With 6″ Arm
Style: Rectangle with Graduated Rule
20" long with 2-1/2" S Hooks on each end.
S Hook Size: 2-1/2"
FEATURES:
- Fits all tarps, all sizes
- Available in several lengths, to best suit your need
- Heavy-duty construction for maximum performance
- Rust resistant Zinc-plated S-hooks pre-installed on either end
- Hooks are secured in a tear drop end, molded from high-grade EPDM compound to hold up against heat and UV rays
- "S" Hooks are crimped on one end to protect your tarps.
- Made from EPDM compound.
- EPDM has exceptional properties related to UV, ozone & weather resistance, chemical resistance, & water & heat tolerance.
- Long-lasting performance in outdoor environments that no other rubber compound can match.
- #1 choice for straps because of their durability, resilience, and potential for longevity
FEATURES:
• Graduations: 8ths,16ths,32nds & 64ths
• Made from the finest quality stainless steel
• Blade is fully hardened and tempered
• Graduations are precisely etched and black ink-filled for readability.
• Rigid body maintains shape and accuracy
SPECS:
Type | Rigid Steel Rule | Width | 1.125" |
Length | 18" | Finish | Satin Chrome |
Graduation | 1/8", 1/16", 1/32", 1/64" | Model No | 402-018 |
Material | Steel | Thickness | 0.040" |
Graduation Type | 4R |
Extra long flex head design for hard to reach fasteners
FEATURES:
- Molded comfort grip handle and chrome vanadium steel construction for strength and durability
- 36-Tooth reversible ratcheting mechanism produces a sweep of 10 degrees
- Low tooth count and thick, heavy-duty teeth provide more strength to apply greater torque
- 180-Degree flexible head for hard-to-reach applications
SPECS:
- Set includes 3 Extra-long flex head ratchet in these sizes..........
- (1) 1/4-Inch Drive x 12"
- (1) 3/8-Inch Drive x 18"
- (1) 1/2-Inch Drive x 24"
CENTER FINDER
Features:
- Accurately and quickly locates center on round workpieces.
- Shaft located in drill chuck or collect center is obtained when pointer lines up with line on short shaft.
- Satin chrome finish
APPLICATIONS
- Place tool in drill chuck or collet and line up pointer with line scribed on shaft.
FEATURES:
- Weather-Resistant, Woven Polypropylene Strap
- Dual-Gear Ratchet Applies More Tension with Less Effort
- Quick-Release Dual Pawls Stay Locked and Maintain Tension During Transit
- Extra strong J hooks hold securely, and are easy to remove.
- Use to Secure Cargo on trucks, trailers, ATV's, snowmobiles, and boats.
- Steel ratchet action lever easily tightens, locks, and releases automatically.
- Trouble free, push button quick release
SPECS:
- Width: 1”
- Length: 15’
- Working Load Limit: 333 lb.
- Maximum Breaking Strength: 1800 lb.
0-6" Precision Dial Caliper . Covered rack for longer life and chip free operation. 4-way measurement for outside,inside,depth and step. Positive lock. Adjustable dial for easy reading. Fitted case. One revolution. 0.001" graduation.
FEATURES:
A Power Torque 1/2-inch drive quick-release ratchet is made using heat-treated chrome-vanadium steel for a longer tool life, and is fully polished to resist corrosion. Made to meet or exceed ANSI specifications, this 45-tooth quick-release ratchet features a standard, round head and a ratcheting angle of 8 degrees for easy use and consistent performance.
SPECS:
- Material: Chromium-Vanadium Steel
- Number Of Teeth: 45
- Quantity: 1
- Handle Type: Standard
- Head Type: Round
- Overall Length (in): 9-3/4 Inch
- Overall Length (mm): 247mm
- Head Thickness (in): 13/16 Inch
- Drive Size (in): 1/2 Inch
- Quick Release: Yes
- ASME Specification: Yes
- Ratchet Angle (Deg): 8 Degree
- Head Width (in): 1-9/16 Inch
CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue and Groove Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
- The ORIGINAL STRAIGHT JAW Tongue and Groove Pliers provide a strong, versatile grip for use in both directions
- RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
- STRONG 90-degree, laser-hardened teeth for superior grip and longevity
- FORGED high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention.
- UNDERCUT tongue and groove won’t slip
- CHANNELLOCK BLUE® grips for comfort
American Standard Wire Gage for Non-Ferrous
Metals Range: 0-36 Gage
Wire Gauge American Standard Wire Gauge for non-ferrous metals
Manufactured from high quality steel Satin chrome finish Offers a quick and accurate way of checking rod and wire sizes
Size range: 0-36 gauge
For sheet, plate and wire Decimal equivalents in inches shown on reverse
WIRE GAUGE 0 to 36 GAUGE U.S. STANDARD
Gage is made to the recognized commercial standard in the United States for uncoated sheet metal, plate iron and steel, based on weights in ounces per square foot.
- Gage provides measurements from 0 to 36 on one face and decimal equivalents on the reverse side.
- S. standard wire gauge for sheet, plate-iron & steel.
- For gaging non-ferrous wire and metal such as copper, brass, etc.
- For gaging uncoated sheet, plate iron and steel.
- American Standard
- U.S. Standard
- Hardened steel
These gloves are lined with fleece for extra protection aganst chapping and winter cold.
FEATURES:
● Heavier 9oz. fabric to give you a little longer life and better durability.
● The fleece lining makes them great for working in colder environments.
MT2 Inside Morse Taper, MT4 Outside Morse Taper
This morse taper sleeve adapts smaller taper shank tools to larger size spindles.
Morse taper sleeves are adapters used to fit smaller Morse taper shank tools into larger Morse taper machine spindles. They provide a secure and precise fit, allowing for the use of a wider range of tool sizes on a single machine. These sleeves are essential for versatile tool management in machining operations
FEATURES:
- Accuracy: 0.015mm, Hardness: 50 HRC
- Hardened and precision ground for dependable service
- For the usage of Morse taper shank, taper shank drills, reamers reducing
- Adopts overall quenching process, long life, lasting, strong shock-resistance
- Used to convert spindles to larger or smaller tapers and extend the spindles of drill presses, radial drills, boring mills and turret lathes
Excellent PFX thin cutting wheels for all metalworking jobs! Double reinforced for safety, premium raw materials and German Technology that ensure top quality, burr free cutting that outperforms other European wheels. The wheel that set the Standard – the PFX Thin Cutting Wheel for metal! An outstanding thin cutting wheel for all types of metal, sheet metal, gratings, tubes, conduit and more.
For use with Angle Grinders
Special thin cutting wheels for use on angle grinders. Double reinforced for safety, premium materials combined with German technology ensures top quality.
- Type 1
- Max RPM: 10,200
- The wheel that set the Standard!
- Excellent thin cutting wheel for all types of metal, sheet metal, gratings, tubes, conduit, etc.
- Double reinforced for safety, premium raw materials combined with German technology ensures top quality.
SPECS:
- Part Number: 80325
- Size: 6x.040(1/32)x7/8
- Max RPM: 10200
- Grain: ALUMINUM OXIDE
- Diameter: 6
- Spec: A46T
Astro Pneumatic 1/4" Extended Shaft Air Die Grinder Capacity: 1/4".Net WT. 1 1/4 lbs. Length: 9 1/2". 8 CFM. Air inlet 1/4" NPT. Max.25,000 RPM. 90 PSI. 1/3 HP
FEATURES:
• Extended shaft provides access to hard to reach places
• High speed
• Positive grip body for easy control
• All ball bearing construction for long tool life
• Lever throttle for positive speed control
• Rear exhaust air flow system
SPECS:
Collet Size: 1/4"
Free Speed: 20,000RPM
Overall Length: 13" (340mm)
Net Weight: 2.9lbs (1.3kgs)
Motor: 0.42HP
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8"
Avg. Air Consumption: 4CFM
Air Pressure: 90PSI
Includes (2) tape measures, lengths:
12' and 25'
- Blades show both standard and metric measurements
- Tough, impact resistant plastic case
- Ergonomic cushion grips for maximum comfort
- Hands-free blade lock
- Dual-Rule Standard and Metric scales
- Quick-Read blade markings
- Comfort grip sleeve
- Hands free blade lock