1336 TEKTON 1/4" Drive x SD-15 Star Bit Socket. Chrome vanadium steel. Drop forged, heat treated. Hardened and tempered chrome vanadium steel bit.

4730 TEKTON 1/4" NPT 3-WAY Air Hose Splitter Manifold About this item Conveniently Use up to Three Air Tools and Accessories at the Same Time by Splitting Air Source Constructed from Rugged and Heavy-duty Solid Brass Specifications: 1/4-Inch NPT (F) Inlet; 1/4-Inch NPT (F) Outlets

4728 TEKTON 1/4" NPT Female Coupler About this item Solid brass construction Precision-machined for leak-proof operation 1/4 in. NPT (F) x 1/4 in. NPT (F)

34541 TEKTON 10 1/2" Fencing Plier Multi-purpose tool for installing, maintaining, and repairing wire fences Seven tools in one: hammer, staple starter, staple puller, staple claw, two wire splicing crimpers, two shear-type wire cutters, and gripping jaws Slim, nonslip grips provide comfort and control without adding bulk Made from high-strength chrome vanadium steel

6921 TEKTON 10 pc. 2-Notch Utility Knife Blades .50 MM Standard Duty. Rugged SK5 surgical steel. Precision-ground razor edge. .50 mm thick, standard duty. Universal fit for most utility knives. Cuts cardboard, paper, rubber, rope, rigid foam, ceiling tiles.

2909 TEKTON 11 pc. Bit and Driver Set Sandblasted S2 steel screwdriver bits Knurled locking collar with anodized finish Stainless steel magnetic bit holder 1-pc. 2-3/8 in. Quick Release Bit Holder 9-pc. 1 in. Screwdriver Bits: Flat: 3/16, 1/4 in.; Phillips: #1, #2; Star Drive: SD-10, 15, 20, 25, 30 1-pc. 1 in. Socket Adapter Shipping Note: Shipping to Alaska, Hawaii, PO Boxes and APO addresses not available for this item Warranty: TEKTON Lifetime Warranty

7210 TEKTON 25 FT. x 3/4" Tape Measure Specifications: * 1/16” Graduations * Easy-to-Read Black on Yellow Tape has Stud Markings Every 16” * Triple-Riveted Sliding Hook for Inside and Outside Measurements. * Tempered Steel, Corrosion-Resistant Coated Blade. * Chrome Plated, High-Impact-Resistant ABS Safety Case * Comfortable, Contoured Housing for Sure Grip * Convenient Belt Clip on Back of Case * Easy Sliding Posi-Lock Thumb Lock and Quick Auto Return * High Carbon Steel Return Spring for Extended Life. * Bumper Guard Housing Protection.

2520 TEKTON 11 pc Folding Hex Key Wrench Set HEX & STAR. Chrome vanadium. Sizes included: T15, T20,3/16",5/32",9/64", 1/8",7/64",3/32",5/64",7/32" & 1/4". Rugged, black oxide finished chrome vanadium steel wrenches. Heavy duty color-coded housing. Textured non-slip grips.

2906 TEKTON 3 pc. Magnetic Nut Driver Set About this item Includes 3-pc. 1/4 in. hex shank magnetic nut driver bits: 1/4, 5/16, 3/8 in. Sandblasted chrome vanadium steel Magnet holds fastener for easy starting Universal fit 1/4 in. hex shank 2-9/16 in. overall length

2902 TEKTON 3 pc. Power Socket Adaptor Set. Sizes: 1/4",3/8" and 1/2" drive. Chrome vanadium steel with sandblasted finish. Spring-loaded ball bearings lock into sockets. Adapts any power drill to drive sockets.

96907 TEKTON 3 pc. Snap-Off Knife Set About this item Fully retractable blade locks in position at any length Snap off worn blade segments for a sharp, new edge Accepts universal snap-off replacement blades Set Includes: (1) Large snap-off knife, (2) Small snap-off knife

4155 TEKTON 3/8" Dr. Air Ratchet .50 ft lbs maximum torque. 90 psi. 4 cfm. 160 rpm. air inlet: 1/4" NPT About this item Forged Steel Head and Aluminum Body Variable Speed Reversible Drive Lever-Style Throttle Non-Slip Cushion Grip Housing Ball Bearing Motor Forged Steel Head and Aluminum Body Variable Speed Reversible Drive

4928 TEKTON 3/8" Drive Oil Sending Unit Socket 3/8" Dr. Oil Sending Unit Socket Drop forged Chrome Vanadium Steel Heat Treated and Black Oxide Finished Engineered for quick and easy replacement of oil sending units in most cars and trucks. Special Size: 3/8" Dr. x 1-1/16" 12-Pt socket Meets or exceeds ANSI standards Part #4928*

2919 TEKTON 5 pc 3" Power Bit Set. Flate & Phillips. Nickel chrome moly steel construction. 2 pc. flat bits (3"): 3/16",1/4" 2 pc. Phillip's bits (3"): #1, #2. 1 pc. drywall bit (3"): #2

7576 TEKTON 5 pc. Screw Extractor Set Removes Broken Screws, Bolts and Studs without Damaging Hole Threads 5-Piece Screw Extractor: 1/8-Inch-1/4-Inch; 1/4-Inch-5/16-Inch; 5/16-Inch-7/16-Inch; 7/16-Inch-9/16-Inch; 9/16-Inch-3/4-Inch Heat Treated High Carbon Steel Construction Corrosion-Resistant Finish

1992 TEKTON 5 pc. Clip Wrench Set SAE Sizes: 3/8" to 5/8" Drop forged, heat-treated carbon steel Corrosion-resistant chrome plated finish Raised panel for added strength Precision machined 15-degree angled open ends and 12-point offset box ends Meets or exceeds ANSI standards 5-pc. Combination Wrenches (Inch): 3/8, 7/16, 1/2, 9/16, 5/8 in.

2988 TEKTON 5 pc Precision Nut Driver Set Metric. Ideal for electronics and hobby projects. Sizes included: 3,3.5,4,4.5 and 5 MM.

4530 TEKTON 5 pc. Sandblasting Tip Kit Quick and Easy Installation Universal Replacement Tips for Siphon-Type Air Sandblasters Set Includes, 3-1/4-Inch Nozzles, 1-5/64-Inch Air Jet, 1-1/8-Inch Hex Key Wrench Quality Guarantee

5812 TEKTON 5" Brake Spring Compressor Tool Drop Forged, Heat-Treated Steel Compressor Cup. Hardened and Tempered Tubular Steel Shaft. Chrome Plated for Durability. Contoured Mechanic's PVC Handle Provides a Secure Hold. Knurled Cup Securely Grips Washer for Both Small and Large Cars. Removes and Replaces Brake Shoe Retaining Spring Caps with a 3/4" Diameter Spring. Part # 5812

3517 TEKTON 6 1/2" Bent Nose Plier Long, tapered nose with fine tip is bent to 45 degrees to reach around obstructions Crosscut teeth distribute force evenly for sure grip in any direction Teeth are cut along the full length of jaw, not just at the tip, maximizing useful contact area Recessed coil spring gently assists opening to minimize hand fatigue Wide, flat handles with slim, nonslip grips provide comfortable fingertip control

3515 TEKTON 6 1/2" Bent Nose Plier. Drop forged heat-treated steel. Brush finished, precision machined jaws.

5690 TEKTON 6" 3-Jaw Gear Puller Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach High-strength forged and hardened steel jaw arms Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress Jaw Spread: 8-3/4 in.; Jaw Reach: 4-3/4 in.

3815 TEKTON 6" Locking "C" Clamp About this item One-handed grip and release action speeds up work Precise tips reach into tight spaces or hold small parts Easy to operate, even with gloves on Forged and hardened steel jaws Knurled thumbscrew sets jaw capacity. Corrosion-resistant chrome plated finish

2915 TEKTON 8 pc. Impact Driver Bit Set 5/16" Hex Shaft Hardened chrome vanadium steel impact bits Precision-milled tips for exact fit in fastener head Universal 5/16 in. hex shanks fit many manual impact drivers Use with TEKTON 2905 and 2910 Reversible Manual Impact Drivers

1366 TEKTON 9 pc 3/8" drive Hex Bit Socket Set Metric Sizes: 3 MM to 10 MM Product Description With seven common hex sizes from 3 to 10 mm and two screwdriver bits, the TEKTON 3/8 in. Drive Hex Bit Socket Set is a great, compact, all-purpose set for repairs and service of cars, lawn and garden equipment, and appliances. Sizes included: 3,4,5,5.5,6,8 and 10 mm. 1/4" flat, #2 Phillips

6607 TEKTON 9 pc. Punctuation Stamp Set 5/32" The TEKTON 6607 Punctuation Stamp Set, a complementary addition to the TEKTON 6610 Letter and Number Stamp Set, permanently imprints metal, wood, plastic and leather. Featuring common punctuation characters, this set is ideal for jewelry and fashion projects, hobbies and crafts, organization, and marking tools, bicycles, and equipment to help prevent loss or theft. The compact storage case keeps stamps neat and organized. Set Includes: (9) punctuation stamps: @, !, $, #, ?, ), , , . , " (1) compact storage case Recommended for use with the TEKTON 16-Ounce Jacketed Fiberglass Brass Hammer. Features: Set includes common punctuation characters: at, !, $, #, ?, ), , , . , " Hardened chrome vanadium steel punches with durable sandblasted finish Imprints metal, wood, plastic and leather Character height: 5/32-Inch Complete with storage case

5806 TEKTON Disc Brake Pad Spreader New TEKTON by MIT Disc Brake Pad Spreader Compresses disc brake caliper piston to allow new pad installation. Large, comfortable 4-flute poly handle Rugged 5/32" steel spreader plate Zinc plated steel center screw and swivel foot

6984 TEKTON Earmuff Hearing Protection Universal Fit Protect your hearing in noisy environments with these durable, over-the-head Safety Earmuffs. Designed for comfort and performance, they provide effective passive noise reduction in industrial settings, construction zones, workshops and more. Ideal for machine operators, site workers, factory staff, and maintenance teams exposed to high-decibel environments.

6927 TEKTON Glass Cutter Die cast zinc construction Carbide Steel Cutting Wheel Three snap-off channels: 1/8", 5/32" & 3/16"

7616 TEKTON Hand Countersink About this item Drop Forged, Heat Treated Steel Flutes Contoured High Impact Nylon Handle Blade Width: 3/4" Countersinks all Sizes of Common Wood Screws Handy for Deburring Metal

5660 TEKTON HI-VISIBILITY 2 pc. Auto Body Pull Rod Set Black Oxide Finish, Heat-Treated Carbon Steel Shafts Hi-Visibility PVC Dipped Handles make Tools Easy to Locate Straight-Shank Pull Rod to get Between Closely-Spaced Panels Formed-Shank Pull Rod for Normal Creases Eliminate the Removal and Replacement of Headliners, Upholstery, and Inner Panels

4275 TEKTON High Speed Sander Product Description TEKTON 5"-HIGH SPEED SANDER features: Lightweight Aluminum Body, Ball Bearing Motor, Built-in Air Regulator for Speed Control, Comfortable Rubberized Grip, Maximum Speed: 18,000 RPM, Working Air Pressure: 60 psi, Average Air Consumption: 5.2 CFM, Air Inlet: 1/4", Minimum Air Hose Size: 3/8", 1-pc. High Speed Sander, 3-pc. Sanding Pads: 3", 4-1/2", 5-1/2", 1-pc. Retaining Screw, 1-pc. Cross Bar Wrench. From the Manufacturer Lightweight Die Cast Aluminum Body, Variable Speed Trigger, Ball Bearing Motor, Non-Slip Cushioned Handle Grip, Maximum Speed: 18,000 RPM, Working Air Pressure: 80 PSI, Average Air Consumption: 5.2 CFM, Air Inlet: 1/4", Minimum Air Hose Size: 3/8. Contents: 1-pc. High Speed Sander, 3-pc. Sanding Pads: 3", 4-1/2", 5", 1-pc. Retaining Screw, 1-pc. Cross Bar Wrench