460 CHANNELLOCK 16" GROOVE JOINT PLIER MADE IN U.S.A. (THE MOST POPULAR)
- 420 CHANNELLOCK 9 1/2" GROOVE JOINT PLIER MADE IN U.S.A. 420$14.99420 CHANNELLOCK 9 1/2" GROOVE JOINT PLIER MADE IN U.S.A. Channellock - The Original Tongue & Groove Plier Comfort grips are only for hand comfort and improved appearance. Features: Our most popular model Right angle teeth grip in all directions for maximum bite and minimum wear. Patented undercut tongue and groove design assures, no slip jaw action. Patented reinforcing edge minimizes stress breakage. Patented PermaLock? fastener eliminates nut and bolt failures. Distinctive CHANNELLOCK BLUE comfort grips. 9 1/2" "Straight jaw", 5 adjustments, 1 1/2" jaw capacity
- 426 CHANNELLOCK 6 1/2" GROOVE JOINT PLIER MADE IN U.S.A. 426$14.99426 CHANNELLOCK 6 1/2" GROOVE JOINT PLIER MADE IN U.S.A. * Made in the USA * CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention * Patented reinforcing edge minimizes stress breakage * Undercut tongue & groove design won't slip * Right-angle, laser-heat treated teeth grip better and last longer * PermaLock® fastener eliminates nut and bolt failure * CHANNELLOCK BLUE® grips for comfort Specifications: * Overall Length: 6.5" * Jaw Length: 0.81" * Joint Thickness: 0.47" * Handle Span:1.69" * Number of Adjustments: 5 * Jaw Capacity: 0.87"
- 430 CHANNELLOCK 10" GROOVE JOINT PLIERS 430$15.99430G CHANNELOCK 10" GROOVE JOINT PLIER Description: • Right angle grip teeth in all directions • Electronic coating to prevent rusting • Undercut Tongue and Groove, won't slip • PermaLock® fastener eliminates nut and bolt failures • Reinforcing edge that minimizes stress breakage • CHANNELLOCK BLUE comfort grips
- 440G CHANNELLOCK 12" GROOVE JOINT PLIER440G$17.99440G CHANNELLOCK 12" GROOVE JOINT PLIER MADE IN USA Description: • Right angle grip teeth in all directions • Electronic coating to prevent rusting • Undercut Tongue and Groove, won't slip • PermaLock® fastener eliminates nut and bolt failures • Reinforcing edge minimizes stress breakage • CHANNELLOCK BLUE comfort
- 480 CHANNELLOCK 20 1/4" GROOVE JOINT PLIER MADE IN U.S.A.480$50.99
480G CHANNELLOCK 20 1/4" GROOVE JOINT PLIER MADE IN U.S.A. LIFETIME WARRANTY 20-1/4" Tongue & Groove Pliers 5-1/2" Jaw Capacity & 3-5/16" Jaw Depth With 12 Adjustments Undercut Tongue & Groove Joints Right Angle Teeth Grip In All Directions Laser Heat Treated Teeth
- GS-2 CHANNELLOCK 2PC TONGUE AND GROOVE PLIER SET MADE IN U.S.A. GS-2$24.99GS2 CHANNELLOCK 2PC TONGUE AND GROOVE PLIER SET MADE IN U.S.A. This gift package contains a NO.420 9 1/2 inch tongue and groove NO.337 7 inch cutting plier.
- CHANNELLOCK 3PC TONGUE AND GROOVE SET MADE IN U.S.A. GS-3$34.99GS-3 CHANNELLOCK 3PC TONGUE AND GROOVE SET MADE IN U.S.A. ChannelLock GS-3 Specifications: • Adjustments: (440) 7 (420) 5 (426) 5 • Length: (440) 12" (420) 9.5" (426) 6-1/2" • Capacity: (440) 2-1/4" (420) 1-1/2" (426) 7/8" • Jaw Length: (440) 1-1/2" (420) 1-1/8" (426) 13/16" ChannelLock GS-3 Includes: • (1) 9-1/2" Tongue and Groove Pliers • (1) 6-1/2" Tongue and Groove Pliers • (1) 12" Tongue and Groove Pliers ChannelLock GS-3 Features: • 420 is ChannelLock's most popular model. • Right angle teeth grip in all directions for maximum bite and minimum wear. • Patented undercut tongue and groove design assures, no slip jaw action. • Patented reinforcing edge minimizes stress breakage. • Patented PermaLock fastener eliminates nut and bolt failures. • Distinctive ChannelLock Blue comfort grips.
- 132 MILTON Volume Safety Blo-Gun Made in U.S.A.$13.49S132 MILTON Volume Safety Blo-Gun. Special venture holes in the extension tube increase the air volume approximately 5 times that of conventional blo-guns and yet maintain required noise level and required nozzle pressure with inlet pressure of 150 PSI allows air to escape if end of extension is blocked. Made in U.S.A.132
- Mercer Abrasives 4 pc File Set$7.19BFS604
BFS604 Mercer Abrasives 4 pc File Set . The perfect set for the ‘Do-It-Yourself’ market. Packaged in a plastic pouch. Contents: (1) 8″ 4-in-1 Shoe Rasp #BSR08 (1) 6″ Slim Taper #BTRS06 (1) 6″ Round #BROB06 (1) 8″ Mill Bastard #BFMB08
- 4301 5C Spin-Index Fixture (without collets)$79.004301
4301 5C Spin-Index Fixture (without collets) . The 5C Spin Indexer is a quick, simple and accurate device for mill work. Mount your workpiece in the 5C Collet and thread it into the indexer. Great for miniature work such as clock gears. Comes complete with precision ground, 36-position index plate, calibrated in 1 degree increments. 5C collet not included.
- D28131 DeWALT 4 1/2"-5" High Performance Angle Grinder$172.00D28131 DeWALT 4 1/2"-5" High Performance Angle Grinder FEATURES 13.0 amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protectionDust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake ventsQuick-Change™ Wheel Release allows tool-free wheel removalDual Abrasion Protection provides increased motor protection from damaging dust and debris ingestionOne-piece brush arm prevents brush hang-up due to dust ingestionE-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motorPower-Off® Advanced Overload Protection shuts the tool off before it reaches overload or burn-upPower-Loss Reset® prevents accidental restarts following a power disruption when the tool is left in the "on" positionVibration-reducing side handle increases comfort for extended use applicationsLow profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spacesAuto-off brushes shut the tool down when the brushes need replacing to avoid tool damageKeyless adjustable guard provides tool-free guard adjustments to increase productivityLock-on slide switch provides increased user comfort in extended use applicationsD28131
- MERCER 1 1/2" DIA. x 1/4" SHANK CRIMPED WIRE WHEEL$5.94182010B
182010B MERCER 1 1/2" DIA. x 1/4" SHANK CRIMPED WIRE WHEEL 20,000 RPM ,.008 Stainless steel Product Features Crimped wire wheels for drills and die grinders 1-1/2-Inch by 1/4-Inch shank Wire Type: 0.008 Stainless Steel 20-Pack Wire brushes available in all different styles and sizes