HIGH SPEED END MILLS
22.39
11/16" High Speed Steel End Mill Double End- 2FLSKU C-22$22.3922.39
read more ▼
- Two flute end mills are used for all end mill operations. The flute volume is more with 2 flute mills, but the feed rates are lower. The fewer number of flutes allows for better chip evacuation in grooving operations.
- Double End Mills have two cutting edges. This results in double the tool life and cost savings, compared to Single End Mills.
- Two flute double end mills are designed for slotting, keying, grooving and general purpose milling.
FOR USE ON:
Aluminum, brass, bronze, plastic, stainless steel, steel
SPECS:
- Cutting Direction: Right Hand
- End Mill Type : Double End
- Fractional Size : 11/16”
- Length of Cut : 1-5/16”
- Number of Flutes : 2
- Overall Length : 5”
- Shank Diameter : ¾”
- Size Type : Fractional
- Tool Material : High Speed Steel
- Helix Angle: 30°
7.95
R-6 2 Flute Ball End Mill 3/16" Flute x 3/8" Shank x 1/2" Flute x 2 3/8" OverallSKU R-6$7.957.95
Right hand Cut, Righ Hand Spiral
read more ▼
6.59
1/16" HSS 4 Flute Double End Mini End MillSKU 116ME$6.596.59
read more ▼
1/16" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
1/16
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
3/16
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0625
|
|
METRIC EQUIVALENT:
|
1.5875mm |
6.59
5/64" HSS 4 Flute Double End Mini End MillSKU 5644ME$6.596.59
read more ▼
5/64" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
5/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
15/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0781
|
|
METRIC EQUIVALENT:
|
1.98374mm |
6.59
3/32" HSS 4 Flute Double End Mini End MillSKU 3324ME$6.596.59
read more ▼
3/32" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
3/32
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
9/32
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0937
|
|
METRIC EQUIVALENT:
|
2.37998mm
|
6.59
7/64" HSS 4 Flute Double End Mini End MillSKU 764ME$6.596.59
read more ▼
7/64" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
7/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
21/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1094
|
|
METRIC EQUIVALENT:
|
2.77876mm |
6.59
1/8" HSS 4 Flute Double End Mini End MillSKU 184ME$6.596.59
read more ▼
1/8" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
1/8
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
3/8
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.125
|
|
METRIC EQUIVALENT:
|
3.175mm |
6.59
9/64" HSS 4 Flute Double End Mini End MillSKU 9644ME$6.596.59
read more ▼
9/64" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
9/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
27/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1406
|
|
METRIC EQUIVALENT:
|
3.57124mm |
6.59
5/32" HSS 4 Flute Double EndMini End MillSKU 5324ME$6.596.59
read more ▼
5/32" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
5/32
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
7/16
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1562
|
|
METRIC EQUIVALENT:
|
3.96748mm |
6.59
11/64" HSS 4 Flute Double End Mini End MillSKU 1164ME$6.596.59
read more ▼
11/64" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
11/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
1/2
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1719
|
|
METRIC EQUIVALENT:
|
4.36626mm
|
6.59
3/16" HSS 4 Flute Double End Mini End MillSKU 3164ME$6.596.59
read more ▼
3/16" X 3/16 Shank HSS 4 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
3/16
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
1/2
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
4
|
|
CENTER CUTTING:
|
Non Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1875
|
|
METRIC EQUIVALENT:
|
4.7625mm |
7.99
3/64"HSS 2 Flute Double End Miniture End MillSKU 364M2$7.997.99
read more ▼
2 Flute Mini End Mill 3/64" Dia. of Cut x 9/64" Length of Cut x 2 1/4" Overall Length x 3/16" Shank
3/64" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
3/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
9/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0469
|
|
METRIC EQUIVALENT:
|
1.19126mm |
6.59
1/16" HSS 2 Flute Double End Mini End MillSKU 116M2$6.596.59
read more ▼
1/16" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
1/16
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
3/16
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0625
|
|
METRIC EQUIVALENT:
|
1.5875mm |
7.99
5/64" HSS 2 Flute Double End MiniEnd MillSKU 564M2$7.997.99
read more ▼
5/64" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
SIZE: 5/64
MATERIAL: High Speed Steel
FINISH:Uncoated (Bright)
FLUTE LENGTH: 15/64"
OVERALL LENGTH: 2-1/4"
SHANK SIZE: 3/16"
STYLE: Miniature
NUMBER OF FLUTES: 2
CENTER CUTTING: Center Cutting
DECIMAL EQUIVALENT: 0.0781
METRIC EQUIVALENT: 1.98374mm
6.59
3/32" HSS 2 Flute Double End Mini End MillSKU 332M2$6.596.59
read more ▼
3/32" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
3/32
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
9/32
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.0937
|
|
METRIC EQUIVALENT:
|
2.37998mm |
6.59
7/64" HSS 2 Flute Double End Mini End MillSKU 764M2$6.596.59
read more ▼
7/64" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
7/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
21/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1094
|
|
METRIC EQUIVALENT:
|
2.77876mm |
6.59
1/8" HSS 2 Flute Double End Mini End MillSKU 18M2$6.596.59
read more ▼
1/8" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
1/8
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
3/8
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.125
|
|
METRIC EQUIVALENT:
|
3.175mm |
6.59
9/64" HSS 2 Flute Double End Mini End MillSKU 964M2$6.596.59
read more ▼
9/64" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
9/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
27/64
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1406
|
|
METRIC EQUIVALENT:
|
3.57124mm |
6.59
5/32" HSS 2 Flute Double End Mini End MillSKU 532M2$6.596.59
read more ▼
5/32" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
5/32
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
7/16
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1562
|
|
METRIC EQUIVALENT:
|
3.96748mm
|
7.99
11/64" HSS 2 Flute Double End MiniatureEnd MillSKU 1164M2$7.997.99
read more ▼
11/64" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
11/64
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
1/2
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1719
|
|
METRIC EQUIVALENT:
|
4.36626mm |
6.59
3/16" HSS 2 Flute Double End Mini End MillSKU 316M2$6.596.59
read more ▼
3/16" X 3/16 Shank HSS 2 Flute Double End, End Mill
- Used for general-purpose milling including profiling, slotting, roughing, cutting keyways and pockets
- These versatile end mills can be used on a wide range of materials such as aluminum, steel, and stainless steel
- Their large core diameter provides rigidity and reduces deflection while the cutting geometry allows for rapid stock removal
- End Mills come in a wide range of styles including single end, double end, center cutting, corner rounding and roughing
SPECS:
|
SIZE:
|
3/16
|
|
MATERIAL:
|
High Speed Steel
|
|
FINISH:
|
Uncoated (Bright)
|
|
FLUTE LENGTH:
|
1/2
|
|
OVERALL LENGTH:
|
2-1/4
|
|
SHANK SIZE:
|
3/16
|
|
STYLE:
|
Miniature
|
|
NUMBER OF FLUTES:
|
2
|
|
CENTER CUTTING:
|
Center Cutting
|
|
DECIMAL EQUIVALENT:
|
0.1875
|
|
METRIC EQUIVALENT:
|
4.7625mm |