WIRE GAUGE 0 to 36 GAUGE U.S. STANDARD

Gage is made to the recognized commercial standard in the United States for uncoated sheet metal, plate iron and steel, based on weights in ounces per square foot.

• Gage provides measurements from 0 to 36 on one face and decimal equivalents on the reverse side.
• S. standard wire gauge for sheet, plate-iron & steel.
• For gaging non-ferrous wire and metal such as copper, brass, etc.
• For gaging uncoated sheet, plate iron and steel.
• American Standard
• U.S. Standard
• Hardened steel

8863WS 6" Wire Stripper with Teeth For use with copper only Strips wire from 10 to 22 gauge and 0.6-2.6mm thick Crimp terminals Re-threads screws Compression spring

FEATURES:

• Hardened and tempered tool steel.
• For gaging uncoated sheet, plate iron, and steel.
• Gages provide measurements from 0 to 30 on one face and shows decimal equivalents on reverse side.
• U.S. Standard.

BWS09 Cal-Hawk 9" Professional Wire Stripper Drop forged, heat-treated steel shaft and handles with insulated double dipped cushion grips. Strips copper and aluminum wire from 10 to 24 awg. Wide size range for bolt cutters and screw sizing