Wheel brushes are available in a variety of styles, including crimped wire wheel brushes, knotted wire wheel brushes, and nylon wheel brushes, depending on the area of need and the standard of each brush type
Our selection of wire wheels include USA made Weiler Abrasives & Champion (formerly Mercer Abrasives) as well as high quality import. We also have knot wire wheels with an arbor hole for straight grinders or stationary machines like buffing lathes, pedestal or bench grinders. Wire wheels should be used for targeted cleaning and weld beads, surface preparation and heavy deburring.
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/Adobe_Express_20231118_1922060_1.png)
- Although they can also be mounted onto a drill, the speed and power of that tool will lightweight the
effectiveness of the brush - Crimped wire wheels with a permanently-attached 1/4 in stem or shank are primarily intended for use on high speed die grinders
- Featuring Weiler's solid ring construction, these radial wheels are available in heat-treated steel, type 302 stainless steel and brass wire
- Provide a Very Flexible Brushing Action
- Sizes:2",2 1/2" & 3" with 2 pc Mandrels
- Makes short work of any surface cleaning job
- Heavy duty brass wires remove dirt, paint, rust, and residue without sparking
- Max speed: 4500RPMS
4 x 3/16 x 5/8 - 11, M10 x 1.25, M10 x 1.5 General Purpose Stringer Bead Wire Wheels Are Ideal For Applications Like Cleaning Welds Can Also Remove Rust, Paint, Surface Film And Use For Heavy Deburring For Use In Angle Grinders Superior rotational balance reduces operator fatigue and improves tool life Provides excellent abrasion and wear resistance These industrial wire brushes are made from high quality steel that is knotted and twisted for heavy grinding applications Stainless steel wire: Used on aluminum, stainless steel, and other high tensile alloys to prevent contamination or after rust
186010 MERCER 4" x 3/16" x (5/8"-11,M10x1.25,M10x1.5) Stringer Bead Wire Wheel . Stringer bead wheels for right angle grinders 4-Inch by 3/16-Inch by (5/8-Inch -11, m10x10.25, m10x1.5) Wire Type: 0.020 Carbon Steel 1-Pack
- 6" diameter x 3/4" wide Crimped Wire Wheel with arbors of 2", 1/2" and 5/8"
- Use on a Bench/Pedestal Grinder. Max RPMs 6,000
- Made with .014 Carbon Steel Wire for general purpose applications. Good on irregular surfaces.
- Carbon steel wire is the most common and good for general purpose applications
- Not recommended for stainless steel
183010 MERCER 6" x 3/4" x 1/2" or 5/8" Hole Crimped Wire Wheel . Crimped wire wheels for bench grinders 6-Inch by 3/4-Inch by (1/2-Inch , 5/8-Inch ) Wire Type: 0.014 Carbon Steel 1-Pack
184020 MERCER 8" x 5/8" or 1/2" Hole Knot Wire Wheel . Knot wire wheels for bench grinders 8-Inch by 5/8-Inch by (1/2-Inch , 5/8-Inch ) Wire Type: 0.014 Carbon Steel 1-Pack
SPECS:
Type: Crimped Wire Wheel
Diameter: 1-1/2"
Wire Size: 0.008"
Shank Diameter: 1/4"
Material: Stainless Steel
Max Operating Speed: 20,000 RPM
Use On: Die Grinder or Power Drill
Solid ring construction
2" Crimped Wire Wheel with a 1/4" Shank
FEATURES:
- General purpose. Flexible for light to medium applications as well as irregular surfaces
- Stainless Steel Wire is good for aluminum, stainless steel and other high tensile alloys.
- Stainless Steel Crimped Wire Wheel for drills and die grinders.
- Made with .008 Stainless Steel Wire.
- Use on a drill or die grinder.
SPECS:
- Material: Stainless Steel
- Brand: Mercer Industries
- Grit Material: Stainless Steel
- Bristle Type: Crimped Wire
- Arbor Diameter: 1/4"
- Bristle Diameter: 0.008"
- Diameter: 2"
- Operating Speed: 20,000 RPM
MERCER 3" CRIMPED WIRE WHEEL
Flexible for light to medium-duty applications as well as irregular surfaces
FEATURES:
- 3" Crimped Wire Wheel with a 1/4" Shank.
- Made with .014 Carbon Steel Wire.
- Use on a drill or die grinder. Max RPMs 20,000.
- Carbon steel wire is the most common and good for general purpose applications
- Not recommended for stainless steel
SPECS:
• Abrasive Material: Carbon Steel
• Diameter: 3"
• Operating Speed: 20,000 RPM
• Product Type: Wire Wheels
• Use:
• Arbor Diameter: 1/4"
• Bristle Diameter: 0.014"
3" Crimped Wire Wheel with a 1/4" Shank. Made with .008 Stainless Steel Wire.
FEATURES:
- General purpose. Flexible for light to medium applications as well as irregular surfaces
- Stainless Steel Wire is good for aluminum, stainless steel and other high tensile alloys.
- Made with Non-Magnetic .008 Stainless Steel Wire.
- Use on a drill or die grinder
- Max RPMs 20,000.
- General purpose, Flexible for light to medium applications as well as irregular surfaces
- Stainless Steel Wire is good for aluminum, stainless steel and other high tensile alloys.
- Superior balance reduces vibration
- Durable axel ring holds wires in tight formation
- Excellent abrasion and wear resistance
- High-flexing action
- Perfect for light cleaning, paint and rust removal, and deburring metals
SPECS:
- Abrasive Material: Stainless Steel
- Diameter: 3"
- Operating Speed: 20,000 RPM
- Product Type: Wire Wheels
- Arbor Diameter: 1/4"
- Bristle Diameter: 0.008"
- Bristle Type: Crimped Wire
186040 MERCER 6" x 3/16" x 5/8"-11 Stringer Bead Wire Wheel . Stringer bead wheels for right angle grinders 6-Inch by 3/16-Inch by 5/8-Inch -11 Wire Type: 0.020 Stainless Steel 1-Pack
183020 MERCER 8" x 3/4" x 1/2" or 5/8" Hole Crimped Wire Wheel 4,500 RPM . Crimped wire wheels for bench grinders,
Weiler 8" Crimped Wire Wheel Coarse Wire 5/8"-1/2" Arbor Made in U.S.A.
Made of steel wire for long lasting durability. Crimped-structured design. For general purpose applications. Medium face wheel. Diameter is 8". Max RPM is 6,000. Wire size is 0.014". Product Specifications BRAND Weiler MAXIMUM RPM 6000 WEIGHT LBS 1 ARBOR THREAD 5/8 - 1/2 in FACE PLATE THICKNESS INCHES 1/2 TRIM LENGTH NCHES 1.0625 DIAMETER INCHES 8 WIRE SIZE INCHES 0.014 STRUCTURE Crimped WIRE MATERIAL Steel FACE WIDTH INCHES 5/8
Weiler 3-1/4" Stem-Mounted Knot Wire Wheel provides a heavy-duty brushing action with some flexibility for demanding deburring applications on steel, armored steel, cast iron, ductile iron and tool steel. The permanently-attached 1/4 in stem are intended for use on CNC,/Milling/Automatic Machines, Die Grinders, Drills, Drill Presses, Right Angle Die Grinders and Straight Grinders.
Specifications:
Rugged knot-type construction provides aggressive, high-impact action for severe applications
- Fill Diameter: 020in
- Face Width: 3/8”
- Diameter: 3-1/4”
- Fill Material: Steel
- Arbor/Stem: 1/4"
- Speed: 25000 rpm [Max]
- Wire Style: Twist Knot Wire
- Trim Length: 5/8"
- Applications: Roughening, Deburring, Cleaning prior to welding, Rust & Paint Removal, Weld scale and corrosion removal
