V-BLOCKS
MVB0537 V-Block Pecision Set Clamping
Made of tool steel, hardened and precision ground.
Matched and numbered in pairs to an accuracy of .0002"
Capacity: 1 1/2" . Size: 2 3/4" x 1 3/4" x 1 5/8"
22423 V-BLOCK & CLAMP SET . Stepped groove construction permits low and high clamping. Holds square or round work. Hardened steel. All sides precision ground parallel and square. Size: 2 1/2"L x 2 3/4"W x 2"H. Capacity:2" round,1 7/16" square.
MMP0661 MAGNETIC UNIVERSAL V-BLOCK SET . Pair of long V-blocks. Size:1 7/8" x 2 3/8" x 4 3/8". Reg:$114.95
3" Steel V-Block Set
- Steel V Blocks
-
Supplied in matched and numbered pairs.
-
Made of high qaulity seasoned castings.
-
Blocks are accurately machined square and parallel.
- Supplied in matched pair
- Made of casting steel, properly seasoned against distortion
- Machined square and parallel to meet standard specifications
SPECS:
- OAL: 3"
- Capacity:1-3/4"
- Height: 2-3/8"
- Thickness: 1-5/16"
6" Steel V-Block Set
- 6 X 2-1/2 X 3-1/2" Steel V-Block Set
- Made of hardened and ground tool steel.
- Machined square and parallel to meet standard specifications.
- 6" length of block, 3-1/4" wide, 3-1/2" in height, 2-1/2" thickness of block.
- Supplied in matched and numbered pairs.
SPECS:
- Supplied in pairs; Blocks are accurately machined square and parallel
- Made of high quality seasoned castings.
- Overall Dimension: A: 6"; B: 3-1/4"; C: 3-1/2"; D: 2-1/2"
MVB665 MAGNETIC V-BLOCK . Size: 4"L x 2 3/4"W x 3 3/4"H,V width:2". Ideal for holding round or irregular shapes for scibbing,grinding,measuring and machining. Powerful holding force. Fine precision ground finish for use as an inspection device. Fixed ON/OFF switch. Reg:$119.00
These matched-pair blocks and clamps are equipped with screws that allow for easy diameter changes, and their grooves help you have quick and effortless clamping of your workpieces.
Benefits
- Screws provide easy diameter changes while grooves allow for quick clamping.
Applications
Accurate enough to use for layout and surface plate work. Designed so the clamps do not protrude over the sides, and therefore can be used on their sides.
Features
- All sides ground square and parallel to each other.
- V's are ground central, parallel and square to the ends.
- Rugged enough for machining operations.
- Made of hardened and ground chrome steel.
- 90° "V" Angles.
SPECS:
2-3/4" x 2-1/2" x 1 3/4".
1-1/2" capacity.
| Minimum Capacity of Vee | 1/4" |
|---|---|
| Maximum Capacity of Vee | 1-1/2" |
| Dimensions | 2-3/4" x 2-1/2" x 1-3/4" |
| No. of Blocks | 2 |
| Type | "V" Blocks & Clamps Set |