This set is more than capable of removing the damaged screws no matter if it is/was a Phillips, Slotted, Star or Square screw head prior to the damage. With hardened steel bits and 1/4" shanks to fit into your drill, socket or screwdriver. Get those damaged screws out so you can replace them with a new one.
- Removes Damaged Phillips, Slotted, Star and Square screws
- Hardened steel bits for secure bite on damaged fasteners
- For use with removing size 4-14 screws and bolts up to 5/16-Inch
- Double-sided extractor tips remove stripped screws and bolts
- Drill out, flip bit, and extract screw
Set includes:
(3) Double-sided extractors Sizes:
- #1: Screw Size 4-7, SAE Bolt Size 7-32-Inch, MM Bolt Size 5mm,
- #2: Screw Size 8-10, SAE Bolt Size 1/4-Inch, MM Bolt Size 6mm,
- #3: Screw Size 11-14, SAE Bolt Size 5/16-Inch, MM Bolt Size 8mm
Set Set includes:
• 12 oz. Brass hammer
• (1) 1 lb. Ball-pein hammer,
• (1) 1/2 lb. Dead blow hammer
SPECS:
• 12 oz. Brass hammer - brass non-sparking platted cap for use on soft metals/ panels
• 1 lb. Ball-pein hammer - steel plated cap for use with striking punches and chisels, shaping and straightening unhardened metals
• 1/2 lb. Dead blow hammer - for use with non-marring and non-sparking applications - shock absorbing steel shot filled canister for maximum force with reduced rebound
Overall Lengths:
• Brass Hammer - 8.75 inches
• Ball-Pein Hammer - 12.5 inches
• Dead Blow Hammer - 10.5 inches
3 Position Inspection Sticker Scraper General purpose windshield and window scraper uses single edge razor blade Blade section folds into handle and locks for safe storage.
Features and Benefits:
- General purpose windshield and window scraper uses single edge razor blade
- Can be used in three different lock positions to aid in cleaning windshields at corners and on curved surfaces
- Blade section folds into handle and locks for safe storage
- Supplied with blade
- Made with precision and quality in mind
30936 Titan 3 pc low Profile Adaptor Set . This is a low profile adapter that is manufactured in various sizes to allow a ratchet wrench to drive a socket one size larger than would otherwise be suitable. Can used in relatively tight circumstances. Set includes 3/4 in. to 1/2 in., 1/2 in. to 3/8 in., 3/8 in. to 1/4 in. Cr-MO construction Detent ball design Impact grade Black oxide finish
- 33' long measuring tape with quick-read and standard markings
- 1 inch wide blade shows easy, quick-read markings for 1/8, 1/4, 3/8, 1/2, 5/8, 3/4 and 7/8 inch marks
- Tough, impact resistant plastic case
- Ergonomic cushion grips for maximum comfort
- Hands-free blade lock
Includes (4) tape measures, lengths:
12', 16', 25' and 33'
- Blades show easy, quick-read markings for 1/8, 1/4, 3/8, 1/2, 5/8, 3/4 and 7/8 inch marks
- Tough, impact resistant plastic case
- Ergonomic cushion grips for maximum comfort
- Hands-free blade lock
- Maximum Standout Distance: 61-83"
- On Center stud marking at 16" increments
- On Center joist markings at 19.2" increments
- Lacquer coating helps prevent rust and wear
- Easy, quick-read markings
- Adapts sockets to power drills and drivers
- Detent ball for secure socket retention
- Magnetic hex bit holder fits standard 1/4 inch hex bits
- Durable heat-treated chrome vanadium steel construction
- Corrosion-resistant black phosphate finish
- 1/4-Inch hex shanks
All guns feature aluminum paint cups, die cast aluminum body with chrome plated finish, two-step trigger control and non-bleeder type, gravity feed external mix, stainless steel nozzles, Adjustable spray width, air inlet and fluid outlet.
- Leading Manufacturer Of High-Quality Products
- 2 step trigger control, Non-bleeder type
- Gravity feed external mix
- Stainless steel nozzles and an adjustable spray width.
- Air inlet as well as fluid outlet.
- Spray Pattern Control – Allows adjustment from round to full fan shape
- Air Valve – For precise control of air flow
- Adjustable Spray Width, Air Inlet, and Fluid Outlet
- 1/4″ Air Inlet
- 14-45 PSI Operating Pressure
- 7.0-8.0 CFM Air Consumption
Kit includes:
- 0mm detail gun for lighter materials and touch up work
- 4mm production gun for lighter materials
- 7mm production gun for heavier materials.
- Packaged in aluminum storage case.
- Designed for removal of high spots on machined surfaces.
- Made of hardened and tempered steel.
- Nicely finished wooden handle.
The torsion flex design feature allows the torsion section to flex under load pressure to increase durability in torque applications The magnetic strong market drive system features powerful magnetic insert bit holders designed for use with impact drills and drivers that reduces wobble and minimizes drops BitPro insert bits are made of highest quality alloys featuring unique precision design that reduces stripping and extends bit life Includes two magnetic bit holders Heavy duty storage case featuring tilt out bit holders for easy access Set Includes: (27) 1 Inch Bits: Phillips: (3) PH1, (3) PH2 & (3) PH3; Hex: (2) 3/32, (2) 1/8, (2) 5/32 & (3) 3/16 inch; Slotted: (3) 1/4, (1) 3/16 & (1) 9/32 inch Square: (1) SQ1, (2) SQ2 & (1) SQ3 (9) 2 Inch Bits: Phillips: PH1, PH2 & PH3; Slotted: 1/4 & 3/8 inch; Star: T15, T20, T25 & T30 (2) 3-1/2 Inch Bits: Phillips: PH2; Square: SQ2 (1); 1/4 Inch magnetic nut setter; (1) 5/16 Inch magnetic nut setter; (1) Extension; (1) Bit Holder.
614 5 in 1 Scraper . Steel blade with solid wooden handle,great for removing putty,scraping paint,opening cans,cleaning rollers and more.
Set of six tools which disconnect the spring lock couplings on air conditioning lines and on fuel line quick connect couplings Easy to use in confined spaces and is color coded for easy size identification.
Set includes six sizes:
- 5/16" - Grey
- 3/8" - Light Blue
- 1/2" - Red
- 5/8" - Dark Blue
- 3/4" - Black
- 7/8" - White
Some parts are not legal for use in California or other states with similar laws/regulations
- 6 pc 3/4" ceramic magnetic discs
- Dimensions: 3/4" wide x 1/8" deep
- Designed for lifting, holding, retrieving and separating metal objects
- Magnetic Disc
Sizes: 8mm to 15mm
- Impact grade
- Color ring for easy size identification
- 1/4" hex shank fits any standard drill chuck
- Includes handy storage rail
- Sizes include: 8mm, 10mm, 12mm, 13mm, 14mm and 15mm
Features:
- Sizes:1/4" to 9/16"
- Impact grade
- Color ring for easy size identification
- 1/4" hex shank fits any standard drill chuck
- Includes handy storage rail
- Set Sizes: T-40 to T-60
- Includes (4) 3/8" drive and (2) 1/2" drive bits and (1) steel storage rail
- 3/8" drive bit sizes: T40, T45, T47, T50
- 1/2" drive bit sizes: T55 and T60
- Made of chrome vanadium with corrosion-resistant plated finish and the S2 alloy steel bits provide strength and durability
Titan 6in Sanding Pad
Replacement sanding pad for 19225 and other dual action sanders. This item is to be used with self-adhesive abrasives and has a maximum operating speed of 10,000 rpm.
Standard replacement pad for Vapor item 19225 As well as other dual action sanders For self-adhesive abrasives Maximum operating speed: 10,000 RPM
- Spinning finger grip for increased control
- Easy one-hand operation
- 12 times stronger magnet than standard bit holder
- Retract collar to install or remove bits
- 3000 RPM max
- Use with insert bits only