SCREW EXTRACTORS
This set is more than capable of removing the damaged screws no matter if it is/was a Phillips, Slotted, Star or Square screw head prior to the damage. With hardened steel bits and 1/4" shanks to fit into your drill, socket or screwdriver. Get those damaged screws out so you can replace them with a new one.
- Removes Damaged Phillips, Slotted, Star and Square screws
- Hardened steel bits for secure bite on damaged fasteners
- For use with removing size 4-14 screws and bolts up to 5/16-Inch
- Double-sided extractor tips remove stripped screws and bolts
- Drill out, flip bit, and extract screw
Set includes:
(3) Double-sided extractors Sizes:
- #1: Screw Size 4-7, SAE Bolt Size 7-32-Inch, MM Bolt Size 5mm,
- #2: Screw Size 8-10, SAE Bolt Size 1/4-Inch, MM Bolt Size 6mm,
- #3: Screw Size 11-14, SAE Bolt Size 5/16-Inch, MM Bolt Size 8mm
This set has 5 size drill bits (9/64-Inch, 3/16-Inch, 15/64-Inch, 5/16-Inch and 3/8-Inch) with the corresponding extractors 1-5.
- 10 Piece Set in Pouch
- Designed for softer materials or thin-walled pieces such as pipes and fittings
- Design eases extraction because it does not expand the material as you remove it
- Removes both left-hand and right-hand threaded parts
- Extractor size and recommended drill bit size are etched on each tool
Spiral Screw Extractor Sizes EX1 - EX6
- Designed to remove broken studs, bolts, socket screws and fittings
- Aggressive left hand spiral design for extra gripping power
- Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
- Extractor size and recommended drill bit size are etched on each tool.
- Sizes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6
- For Drill Sizes: 3/32" to 5/8"
IRWIN 5 pc. BOLT GRIP Bolt Extractor Set.
Set include bolt extractors to remove bolts sizes: 8mm, 10mm, 13mm, 19mm, 5/16", 11/16", 3/4" in drive size 3/8"
- When you are faced with a rounded-off, rusted-tight or painted-over bolt, bolt extractors will break it free
- Reverse spiral flutes are designed to bite down to provide maximum gripping power
- High carbon steel ensures longer life and greater durability
- Universal lobular design fits all types of fasteners
- reverse flutes bite down for maximum grip.
- Use with hand or power tools.
- 3/8" square drive for use with hand ratchets, impact wrenches, and air ratchets; hexagonal flats for use with flat wrench, pliers, adjustable wrench, sockets or VISE-GRIP locking pliers
Left Hand Screw Extractor Set
Sizes: No.1 thru No.9
- Designed to remove broken studs, bolts, socket screws and fittings
- Aggressive left hand spiral design for extra gripping power
- Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
- Extractor size and recommended drill bit size are etched on each tool.
-
EX1-EX9 Drive Size (In.)#1, #2, #3, #4, #5, #6, #7, #8, #9
-
Drill Size (In.)5/64", 7/64", 5/32", 1/4", 17/64", 13/32", 17/32", 13/16", 1-1/16"
Features & Benefits: Designed to remove broken studs, bolts, socket screws and fittings Left hand spiral design Includes # 1 through # 9
- Designed to remove broken studs, bolts, socket screws and fittings
- Left hand spiral design
- Includes # 1 through # 9 extractors, and heavy duty storage case
52635 HANSON 5 PC.STRAIGHT FLUTE SCREW EXTRACTOR SET SIZES: ST-1 to ST-5 MADE IN U.S.A. . To remove this size broken bolt,screw or pipe. 3/16" to 5/16",3/8",7/16" & 1/8" pipe. 1/2" to 9/16" & 1/4" pipe,5/8" & 3/8" pipe. Sizes include: ST-1,ST-2,ST-3,ST-4 & ST-5.
SIZES: EX-1 thru EX-5
- Designed to remove broken studs, bolts, socket screws and fittings
- Aggressive left hand spiral design for extra gripping power
- Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
- Extractor size and recommended drill bit size are etched on each tool
Hanson 53705 2 pc. EX-5 Left Hand Spiral Flute Screw Extractor Matched with Corresponding 19/64" Drill Bit. High speed steel drill bit for removing broken screws and bolts. Eliminates redrilling and retapping for a larger screw. BELOW COST!!! Reg: $6.30.
Hanson 11117 10 pc. Screw Extractor And Cobalt Drill Bit Combo Pack. Comes with 5 coblat steel drill bits matched with corresponding screw extractors. Heavy-duty vinyl pouch. 5 spiral flute screw extractor sizes 1 through 5 with corresponding cobalt drill bits.Made in U.S.A. Reg: $29.95
11119 HANSON BRAND 10PC. DRILL EXTRACTOR SET MADE IN U.S.A. . High speed left hand cobalt steel drill bits for drilling hardened bolts and studs. Five useful sizes-drills: 3/32" to 3/8" extractors: 5/32" to 5/8". Ideal for removing broken screws & bolts in soft materials. Made in U.S.A. Reg: $36.85
52425 IRWIN 4PC. SCREW EXTRACTOR SET SPIRAL SIZES: NO.2 TO NO.5 MADE IN U.S.A. Sizes: NO.2,No.3,No.4 and No.5 use drill sizes: 7/64",5/32",1/4" & 19/64". Spiral Flute style. Comes in handy plastic pouch. Made in U.S.A. List price: $10.95
SIZES: ST-2 TO ST-5
- Designed for softer materials or thin-walled pieces such as pipes & fittings
- Design eases extraction because it does not expand the material as you remove it
- Removes both left-hand & right-hand threaded parts
- Extractor size & recommended drill bit size are etched on each tool
53226 HANSON 10 PC HEX-HEAD MULTI-SPLINE SCREW EXTRACTOR SET . Specs Bolt Extractor Sets; Tool Type: Hex-Head Multi-Spline Screw Extractor Set; Number of Pieces: 10; Extractor Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32; Contents: Hex Head Multi-Spline Screw Extractors: 1/8 - 13/32; Screw Size Range (Inch): 1/8 - 13/32; Drill Sizes (Inch): 5/64, 7/64, 5/32 Tool Type Hex-Head Multi-Spline Screw Extractor Set Number of Pieces 10 Extractor Size 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32 Contents Hex Head Multi-Spline Screw Extractors: 1/8 - 13/32 Screw Size Range (Inch) 1/8 - 13/32 Drill Sizes (Inch) 5/64, 7/64, 5/32
- Aggressive left-hand spiral design provides extra gripping power.
- Designed for the removal of broken studs, bolts, socket screws and fittings.
- Constructed of high carbon steel for strength under stressful conditions.
- Designed for use with socket or flat wrenches.
- Packaged in plastic case.
- 1/8" through 7/8"
SET ST-1 TO ST-6
- Includes 6-pieces Pouched
- Sizes ST-1 thru ST-6
- Designed for softer materials or thin-walled pieces such as pipes and fittings.
- Design eases extraction because it does not expand the material as you remove it.
- Removes both left-hand and right-hand threaded parts
- Extractor size and recommended drill bit size are etched on each tool.