IRWIN

"99% of all orders will be shipped out the same day.
All orders outside of the U.S. please call our toll free number (800) 521-6579.
Due to our low prices, order minimum $25.00 "
S90Irwin
S-90 IRWIN 9 pc Master Set Left-Hand Spiral Flute Extractors Sizes: No.1 thru No.9
$70.80
S-90 IRWIN 9 pc Master Set Left-Hand Spiral Flute Extractors Sizes: No.1 thru No.9 ItemScrew Extractor Set TypeSpiral Number of Pieces9 BoltsEX1-EX9 For Removing StudsEX1-EX9 ScrewsEX1-EX9 Drive Size (In.)#1, #2, #3, #4, #5, #6, #7, #8, #9 Drill Size (In.)5/64", 7/64", 5/32", 1/4", 17/64", 13/32", 17/32", 13/16", 1-1/16" MaterialHigh Carbon Steel IncludesSpiral EX1-EX9 Impact RatedNo
S-90

visegrip18r.jpg
visegrip18sp.jpg
visegrip24sp.jpg
2 pc. Adjustable Tap Socket Adaptor3095001
$29.99
2 pc. Adjustable Tap Socket Adaptor Jaws adjust to tightly secure taps to 1/2" - 3/8" square drive Compatible with common ratchets. Knurled ring twists to adjust for quick fit. Sku. 3095001
Qty:
394002Irwin.jpg
394002 IRWIN 5 pc. BOLT GRIP Bolt Extractor Set Made in U.S.A.394002
$29.95

394002 IRWIN 5 pc. BOLT GRIP Bolt Extractor Set. reverse flutes bite down for maximum grip. Use with hand or power tools. 3/8",7/16",11MM,1/2",9/16",14MM,5/8" & 16MM. Made in U.S.A. Reg: $36.64

Qty:
irwin42835.jpg
VISEGRIP10LW.jpg
visegrip4wr.jpg
4WR VISE-GRIP 4" Two Curved Jaws With Wire Cutter Locking Plier4WR
$11.49
4WR VISE-GRIP 4" two curved jaw locking plier with wire cutter.

Qty:
HANSON53635.JPG
52635 HANSON 5 PC.STRAIGHT FLUTE SCREW EXTRACTOR SET SIZES: ST-1 to ST-5 MADE IN U.S.A.52635
$19.00

52635 HANSON 5 PC.STRAIGHT FLUTE SCREW EXTRACTOR SET SIZES: ST-1 to ST-5 MADE IN U.S.A. . To remove this size broken bolt,screw or pipe. 3/16" to 5/16",3/8",7/16" & 1/8" pipe. 1/2" to 9/16" & 1/4" pipe,5/8" & 3/8" pipe. Sizes include: ST-1,ST-2,ST-3,ST-4 & ST-5.

Qty:
hanson53705.jpg
53705 2 pc. EX-5 Left Hand Spiral Flute Screw Extractor Matched with Corresponding 19/64" Drill Bit53705
$3.60

Hanson 53705 2 pc. EX-5 Left Hand Spiral Flute Screw Extractor Matched with Corresponding 19/64" Drill Bit. High speed steel drill bit for removing broken screws and bolts. Eliminates redrilling and retapping for a larger screw. BELOW COST!!! Reg: $6.30.

Qty:
visegrip58300.jpg
58100 1" Spring Clamp58100
$1.99
Qty:
visegrip6ln.jpg
visegrip6r.jpg
visegrip8r.jpg
visegrip10groovejoint.jpg
irwinscrewextractor.jpg
Unibit1.jpg
screwextractor7.jpg
Unibit10.jpg
10CR.jpg
VISE-GRIP 10" Curved Jaws Without Cutter Locking Plier 10CR10CR
$13.99
10CR VISE-GRIP 10" Curved Jaws Without Cutter Locking Plier .Curved jaws put tremendous pressure on four points of any style nut or bolt head. Jaw Capacity: 1-7/8" (48 mm) Size: 10" (250 mm)
Qty:
visegrip10r.jpg
VISE-GRIP 10" Straight Jaw Locking Plier 10R
$12.99
10R VISE-GRIP 10" two straight jaw locking-plier.
Qty:
Unibit11.jpg
hanson11117.jpg
11117 10 pc. Screw Extractor And Cobalt Drill Bit Combo Pack Made in U.S.A.11117
$27.00

Hanson 11117 10 pc. Screw Extractor And Cobalt Drill Bit Combo Pack. Comes with 5 coblat steel drill bits matched with corresponding screw extractors. Heavy-duty vinyl pouch. 5 spiral flute screw extractor sizes 1 through 5 with corresponding cobalt drill bits.Made in U.S.A. Reg: $29.95

Qty:
visegrip11sp.jpg
Unibit12.jpg
visegrip12lc.jpg
VISE-GRIP 3 1/8" cap. Large Jaw Locking Plier12LC
$19.99

12LC VISE-GRIP large jaw locking plier.Works well as a pipe wrench.Locks on and grips around the pipe.Plier opens to 3 1/8" large enough to handle most situations requiring a large wrench item.Made in the U.S.A.

Qty:
Unibit12.jpg
1794473IRWINSQUARE.jpg
1794473 IRWIN 8" TRI SQUARE1794473
$3.95
Qty:
1794475IRWINTBEVEL.jpg
1794475 IRWIN 8" T-BEVEL1794475
$2.95
Qty:
IRWIN1794487.jpg
1794487 IRWIN BULLSEYE LEVEL1794487
$1.00
Qty:
hanson1921.jpg
6 Pc. HANSON TAPER PIPE TAP SET MADE IN U.S.A.1921
$108.99
HANSON BRAND TAPER PIPE TAP SET MADE IN U.S.A. 1/8"-27 NPT to 1"-11 1/2 NPT. Six NPT National pipe taper high carbon steel taps in 1/8"-1" sizes. Wood case Sizes included: 1/8"-27NPT,1/4"-18NPT,3/8"-18NPT,1/2"-14NPT,3/4"-14NPT, 1"-11 1/2NPT. Made in U.S.A.
Qty:
irwinscrewextractor.jpg
visegrip20r.jpg
irwintadieset.jpg
24606 IRWIN 41 PC. TAP & DIE SET SUPER SET STANDARD (10-24NC TO 1/2"-20 NF) MADE IN U.S.A.24606
$130.80

24606 IRWIN 41 PC. TAP & DIE SET SUPER SET STANDARD (10-24NC TO 1/2"-20 NF) MADE IN U.S.A. . An ideal set for the automotive mechanic or any user requiring a set to work in tight places where a die stock cannot be used. Packed in unbreakable plastic case with removable tray. Includes one each plug tap and hexagon die for the following 17 thread sizes plus. Thread sizes-5/8" hexagon dies: 4,40NC,6-32NC,8-32NC,10-24NC,10-32NC,12-24NC. Thread sizes-1" hexagon dies: 1/4"-20NC,1/4"-28NF, 5/16"18NC,5/16"-24NF,3/8"-16NC,3/8"-24NF. Hexagon dies: 7/16"-14NC,7/16"-20NF,1/2"-13NC,1/2"-20NF.Threading tools: DS-57 plain die stock,DS-26 adjustable die stock,TR-88 adj. handle tap wrench,TR-73 T-tap wrench,hex nut,TR-50 T-tap wrench,hex nut with 3/8" square drive,G-18 screw pitch gauge 1 screw drive. Made in U.S.A. List $110.15

Qty:
visegrip24r.jpg
VISE-GRIP 24" C-Clamp Locking Plier24R
$54.99
The Original Locking C-Clamps with Regular Tips Wide-opening jaws provide greater versatility in clamping a variety of shapes Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use Constructed of high-grade heat-treated alloy steel for maximum toughness and durability Guarded release trigger quickly unlocks and protects from accidental release Size: 24" / 605 mm Jaw Capacity: 12-1/2" / 317 mm
Qty:
irwintadieset.jpg
26317 IRWIN BRAND 41PC. METRIC TAP 7 DIE SUPER SET (3MM-0.50 TO 12MM-1.75) MADE IN U.S.A.26317
$142.80

26317 IRWIN BRAND 41PC. METRIC TAP 7 DIE SUPER SET (3MM-0.50 TO 12MM-1.75) MADE IN U.S.A. Provides for many metric threading requirements ansd features the advantage of hexagon dies allowing user to work in places whre a die stock cannot be used. Packed in unbreakable plastic case with removable tray. Includes one each plug tap and hexagon die for the following 17 metric thread sizes plus tools indicated:Thread sizes-5/8" hexagon dies: 3MM-0.50,4MM-0.70,4MM-0.75,5MM-0.80,5MM-0.90,6MM-1.00. Thread sizes-1" hexagon dies: 7mm-1.00,8mm-1.00,8mm-1.25, 9mm-1.00,9mm-1.25,10mm-1.25,10mm-1.50,11mm-1.50,12mm-1.50,12mm-1.75. Threading tools: DS-57 plain die stock, DS-26 adjustable die stock,TR-88 adj. handle tap wrench, TR-73 T-tap wrench,hex nut,TR-50 T-tap wrench,hex nut with 3/8" square drive,g-16 screw pitch gauge(Metric) 1 screw drive. Made in U.S.A. List:$123.95

Qty:
irwinscrewextractor.jpg
IRWIN3057041.jpg
3057041 IRWIN 41PC. SCREWDRIVER BIT SOFT CASE SET3057041
$22.20

3057041 IRWIN 41PC. SCREWDRIVER BIT SOFT CASE SET . Specs Number of Pieces 41 Item Screwdriving Bit Set Shank Size (In.) 1/4 Hex Includes Insert Bits: (2) #1, (6) #2, (2) #3, Square (1) #1, (4) #2, (1) #3, 1 Each 6-8, 8-10, 10-12, (2) 6" #2, Power Bits: (1) #1, (3) #2, (2) #3, 1 Each 8-10, 10-12, Square #1, (3) #3, (2) #3; (2) Magnetic Bit Holders; 1/4" and 5/16" Nut Setters; 400 Denier Soft Case Package Quantity 1 Weight 1.750000 SKUs 2CJR1 Description •Drilling and Screwdriving Sets Screwdriving Bit Set, Number of Pieces 41, Shank Size 1/4 In In, Includes Insert Bits(2) #1 (6) #2, (2) #3, Square 1 #1 (4) #2 (1) #3 1 Each 6-8, 8-10, 10-12, (2) 6 In #2, Power Bits(1) #1, (3) #2, (2) #3 1 Each 8-10, 10-12, Square #1, (3) #3, (2) #3, (2) Magnetic Bit Holders, 1/4 In And 5/16 In Nut Setters, 400 Denier Soft Case

Qty:
irwin394100.jpg
7 Pc. Power-Grip Screw Extractor Set 394100
$28.99
Irwin 394100 7 pc. Power Grip Extractor Set. Hex shank fits most drills, impact driver & nut runners. Grips standard & metric size fasteners. Remove damaged screws & small bolts. Sizes: 1/2", 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4", 3/16" Reg: $38.00
Qty:
irwinscrewextractor.jpg
IRWIN4935547.jpg
4935547 IRWIN 47PC. TORSION SCREWDRIVER BIT SET4935547
$19.20

4935547 IRWIN 47PC. TORSION SCREWDRIVER BIT SET •Includes assortment of phillips, robertson, slotted, torx, hex nut drivers, impact rated bits, and case •Heavy Duty Cold Forged Steel provides higher torque output and increased durability to stand up to rigorous use •Driver bits with 3X longer bit life.

Qty:
visegrip4ln.jpg
irwinscrewextractor.jpg
502STEPDRILLSET.jpg
502 IRWIN 3 PC UNIBIT STEP DRILL SET 1MT,2MT & 3MT 28 HOLE SIZES WITH JUST 3 BITS MADE IN USA502
$55.20

502 IRWIN 3 PC UNIBIT STEP DRILL SET 1MT,2MT & 3MT 28 HOLE SIZES WITH JUST 3 BITS MADE IN USA . .Features Non-skid self-starting tip eliminates skidding and the need for center punching Single-flute cutting edge for greater control through steps 3 PIece Unibit Step Drill Set 3 flatted shank prevents slipping in drill chuck Includes: HSS #1, 2, and 3 Number Of Bits: 1 Dimensions Overall Product Weight: 0.32 lbs

Qty:
Iirwin52425.jpg
52425 IRWIN 4PC. SCREW EXTRACTOR SET SPIRAL SIZES: NO.2 TO NO.5 MADE IN U.S.A.52425
$10.95

52425 IRWIN 4PC. SCREW EXTRACTOR SET SPIRAL SIZES: NO.2 TO NO.5 MADE IN U.S.A. Sizes: NO.2,No.3,No.4 and No.5 use drill sizes: 7/64",5/32",1/4" & 19/64". Spiral Flute style. Comes in handy plastic pouch. Made in U.S.A. List price: $10.95

Qty:
Irwin52625.jpg
52625 IRWIN 4PC. STRAIGHT FLUTE SCREW EXTRACTOR SET ST-2 TO ST-5 MADE IN U.S.A.52625
$15.60

52625 IRWIN 4PC. STRAIGHT FLUTE SCREW EXTRACTOR SET ST-2 TO ST-5 MADE IN U.S.A. Sizes: ST2,ST3,ST4 & ST5 Comes in handy plastic pouch. Sizes: ST-2 to ST-5. Made in U.S.A. Reg: $13.00

Qty:
IRWIN52655.jpg
52655 IRWIN 4PC. STRAIGHT FLUTE EXTRACTOR SET MADE IN U.S.A.52655
$25.75

52655 IRWIN 4PC. STRAIGHT FLUTE EXTRACTOR SET MADE IN U.S.A. product specs •Designed for softer materials or thin-walled pieces such as pipes and fittings. •Design eases extraction because it does not expand the material as you remove it. •Removes both left-hand and right-hand threaded parts •Extractor size and recommended drill bit size are etched on each tool.

Qty:
HANSON53226.JPG
53226 HANSON 10 PC HEX-HEAD MULTI-SPLINE SCREW EXTRACTOR SET53226
$21.55

53226 HANSON 10 PC HEX-HEAD MULTI-SPLINE SCREW EXTRACTOR SET . Specs Bolt Extractor Sets; Tool Type: Hex-Head Multi-Spline Screw Extractor Set; Number of Pieces: 10; Extractor Size: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32; Contents: Hex Head Multi-Spline Screw Extractors: 1/8 - 13/32; Screw Size Range (Inch): 1/8 - 13/32; Drill Sizes (Inch): 5/64, 7/64, 5/32 Tool Type Hex-Head Multi-Spline Screw Extractor Set Number of Pieces 10 Extractor Size 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32 Contents Hex Head Multi-Spline Screw Extractors: 1/8 - 13/32 Screw Size Range (Inch) 1/8 - 13/32 Drill Sizes (Inch) 5/64, 7/64, 5/32

Qty:
IRWIN53645.jpg
53645 IRWIN 6PC. STRAIGHT FLUTE SCREW EXTRACTOR SET ST-1 TO ST-6 MADE IN U.S.A.53645
$16.95

53645 IRWIN 6PC. STRAIGHT FLUTE SCREW EXTRACTOR SET ST-1 TO ST-6 MADE IN U.S.A. Includes 6-pieces Pouched, Sizes ST-1 thru ST-6 Quantity 6 per set

Qty:
visegrip5wr.jpg
5WR VISE-GRIP 5" Two Curved Jaws With Wire Cutter Locking Plier5WR
$11.40
5WR VISE-GRIP 5" two curved jaw locking plier with wire cutter.
Qty:
irwinscrewextractor.jpg
68003.jpg
screwextractor7.jpg
visegrip7r.jpg
7R VISE-GRIP 7" Straight Jaw Locking Plier7R
$12.60
7R VISE-GRIP 7" two straight jaw locking plier.
Qty:
visegrip7wr.jpg
7WR VISE-GRIP 7" Two Curved Jaws With Wire Cutter Locking Plier7WR
$12.60
7WR VISE-GRIP 7" two curved jaw plier with wire cutter.
Qty:
screwextractor7.jpg
80750.jpg
screwextractor7.jpg
heart