H.S. TAPER SHANK DRILLS

4.99
1/8
1/8" HSS 1MT Taper Shank Drill BitSKU 18TS$4.994.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
18TS 1/8" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
8.99
9/64
9/64"HSS 1MT Taper Shank Drill BitSKU 964TS$8.998.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
964TS 9/64"HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
3.00
5/32
5/32"HSS 1MT Taper Shank Drill BitSKU 532TS$3.003.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
532TS 5/32"HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
67.20
1-5/16
1-5/16" HSS 4MT Taper Shank Drill BitSKU 15166TS$67.2067.20

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
15166TS 1-5/16" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
10.99
11/64
11/64" HSS 1MT Taper Shank Drill BitSKU 1164TS$10.9910.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1164TS 11/64" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
10.19
3/16
3/16" HSS 1MT Taper Shank Drill BitSKU 316TS$10.1910.19
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • 118 degrees conventional point
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)

SPECS:

  • DIAMETER: 3/16"
  • OVERALL LENGTH:5-3/4"
  • TYPE: Fractional
  • MORSE TAPER: 1MT
  • DECIMAL EQUIV.: 0.6875
  • CUTTING ANGLE: 118° Conventional Point
  • FLUTE LENGTH: 2-1/2"
  • FLUTE: Spiral
  • DEGREE POINT: 118°
  • MATERIAL: HSS
read more ▼
Qty
316TS 3/16" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
6.99
13/64
13/64" HSS 1MT Taper Shank Drill BitSKU 1364TS$6.996.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1364TS 13/64" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
65.00
1-5/8
1-5/8" X 4 Morse Taper High Speed Taper Shank Drill Bit***SKU 1588TS$65.0065.00

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
1588TS 1-5/8" X 4 Morse Taper High Speed Taper Shank Drill Bit*** UNIVERSAL CUTTING TOOLS
4.99
7/32
7/32" HSS 1MT Taper Shank Drill BitSKU 732TS$4.994.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
732TS 7/32" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
99.99
1 3/4
1 3/4" HSS 4MT Taper Shank Drill BitSKU 1344TS$99.9999.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
1344TS 1 3/4" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
6.99
15/64
15/64" HSS 1MT Taper Shank Drill BitSKU 1564TS$6.996.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1564TS 15/64" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
12.59
1/4
1/4" HSS SPIRAL 1MT TAPER SHANK DRILL BITSKU 14TS$12.5912.59

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow.

  • High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools.
  • They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • They have a black oxide surface treatments that is abrasion resistant, reduces chip welding and improves chip flow
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
14TS 1/4" HSS SPIRAL 1MT TAPER SHANK DRILL BIT UNIVERSAL CUTTING TOOLS
5.99
17/64
17/64" HSS 1MT Taper Shank Drill BitSKU 1764TS$5.995.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1764TS 17/64" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
7.99
9/32
9/32" HSS 1MT Taper Shank Drill BitSKU 932TS$7.997.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
932TS 9/32" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
10.99
19/64
19/64" HSS 1MT Taper Shank Drill BitSKU 1964TS$10.9910.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1964TS 19/64" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
10.19
5/16
5/16" HSS SPIRAL 1MT TAPER SHANK DRILL BITSKU 516TS$10.1910.19

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow.

  • High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools.
  • They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow.
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
516TS 5/16" HSS SPIRAL 1MT TAPER SHANK DRILL BIT UNIVERSAL CUTTING TOOLS
5.99
21/64
21/64" HSS 1MT Taper Shank Drill BitSKU 2164TS$5.995.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2164TS 21/64" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
10.19
11/32
11/32" 1MT SPIRAL High Speed Steel Taper Shank Drill BitSKU 1132TS$10.1910.19
Qty
1132TS 11/32" 1MT SPIRAL High Speed Steel Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
9.99
23/64
23/64" HSS 1MT Taper Shank Drill BitSKU 2364TS$9.999.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2364TS 23/64" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
9.99
3/8
3/8" HSS 1MT Taper Shank Drill BitSKU 38TS$9.999.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow.

  • High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools.
  • They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow.
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
38TS 3/8" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
12.99
25/64
25/64"HSS 1MT Taper Shank Drill BitSKU 2564TS$12.9912.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2564TS 25/64"HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
12.99
13/32
13/32", 1MT High Speed Taper Shank Drill BitSKU 1332TS$12.9912.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1332TS 13/32", 1MT High Speed Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
8.99
27/64
27/64" HSS 1MT Taper Shank Drill BitSKU 2764TS$8.998.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow.

  • High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools.
  • They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow.
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2764TS 27/64" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
9.95
7/16
7/16" HSS 1MT Taper Shank Drill BitSKU 716TS$9.959.95

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow.

  • High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools.
  • They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece.
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow.
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
716TS 7/16" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
13.99
29/64
29/64" HSS 1MT Taper Shank Drill BitSKU 2964TS$13.9913.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2964TS 29/64" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
10.99
15/32
15/32" HSS 1MT Taper Shank Drill BitSKU 1532TS$10.9910.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1532TS 15/32" HSS 1MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
7.50
31/64
31/64" x 2 Morse Taper x 4 3/8" Flute Length x 8 1/4" OAL High Speed Taper Shank DrillSKU 3164TS$7.507.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3164TS 31/64" x 2 Morse Taper x 4 3/8" Flute Length x 8 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
7.50
1/2
1/2" x 2 Morse Taper x 4 3/8" Flute Length x 8 1/4" OAL High Speed Taper Shank DrillSKU 12TS$7.507.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12TS 1/2" x 2 Morse Taper x 4 3/8" Flute Length x 8 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
7.95
33/64
33/64" x 2 Morse Taper x 4-5/8" Flute Length x 8-1/2" OAL High Speed Taper Shank DrillSKU 3364TS$7.957.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3364TS 33/64" x 2 Morse Taper x 4-5/8" Flute Length x 8-1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
7.95
17/32
17/32" x 2 Morse Taper x 4 5/8" Flute Length x 8 1/2" OAL High Speed Taper Shank DrillSKU 1732TS$7.957.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1732TS 17/32" x 2 Morse Taper x 4 5/8" Flute Length x 8 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
7.95
35/64
35/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank DrillSKU 3564TS$7.957.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3564TS 35/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
18.99
9/16
9/16" 2MT High Speed Taper Shank DrillSKU 916TS$18.9918.99

9/16" HSS 2MT Taper Shank Drill Bit. Taper shank drills are made to fit Morse tapered holes. Designed to perform in a broad range of materials in the iron and steel families. They have a black oxide surface treatement that is abrasion resistant, reduces chip welding and improves chip flow

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
916TS 9/16" 2MT High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
8.00
37/64
37/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank DrillSKU 3764TS$8.008.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3764TS 37/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
8.50
19/32
19/32" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank DrillSKU 1932TS$8.508.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1932TS 19/32" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
8.50
39/64
39/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank DrillSKU 3964TS$8.508.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3964TS 39/64" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
8.50
5/8
5/8" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank DrillSKU 58TS$8.508.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
58TS 5/8" x 2 Morse Taper x 4 7/8" Flute Length x 8 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
21.99
41/64
41/64" x 2MT High Speed Taper Shank DrillSKU 4164TS$21.9921.99

41/64" HSS Taper Length Drill Bit

  • Taper length for when extra length is needed
  • A dependable, general purpose high speed steel drill bit ideal for production, maintenance or portable drilling jobs
  • They are for use in a wide range of materials such as aluminum, brass, copper, metal, plastic and wood
  • Surface treated with abrasion-resistant black oxide and made of high speed steel
  • 118 degree conventional point
  • Round shank for use in a wide range of tool holding systems

  SPECS:

Size:
41/64
Material:
High Speed Steel
Finish:
Black Oxide
Flute Length:
5-1/8
Overall Length:
9
Shank Type:
Round
Style:
Taper Length
Cutting Angle:
118
Point Type:
Conventional Point
Number of Flutes:
2
Cutting Direction:
Right Hand
Decimal Equivalent:
0.6406
Metric Equivalent:
 16.27124mm
read more ▼
Qty
4164TS 41/64" x 2MT High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
8.95
21/32
21/32" x 2 Morse Taper x 5 1/8" Flute Length x 9" OAL High Speed Taper Shank DrillSKU 2132TS$8.958.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2132TS 21/32" x 2 Morse Taper x 5 1/8" Flute Length x 9" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
18.95
43/64
43/64" x 2 Morse Taper x 5 3/8" Flute Length x 9 1/4" OAL High Speed Taper Shank DrillSKU 4364TS$18.9518.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
4364TS 43/64" x 2 Morse Taper x 5 3/8" Flute Length x 9 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
17.95
11/16
11/16" HSS 2MT Taper Shank Drill BitSKU 116TS$17.9517.95

11/16" x 2MTx 5-3/8" Flute x 9 1/4" OAL High Speed Taper Shank Drill

  • #2 Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)

SPECS

Size:
11/16
Material:
High Speed Steel
Finish:
Black Oxide
Flute Length:
5-3/8
Overall Length:
9-1/4
Shank Size:
2MT
Shank Type:
Taper
Style:
Taper Shank
Cutting Angle:
118
Point Type:
Conventional Point
Number of Flutes:
2
Cutting Direction:
Right Hand
Decimal Equivalent:
0.6875
Metric Equivalent:
read more ▼
Qty
116TS 11/16" HSS 2MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
8.95
45/64
45/64" x 2 Morse Taper x 5 5/8" Flute Length x 9 1/2" OAL High Speed Taper Shank DrillSKU 4564TS$8.958.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
4564TS 45/64" x 2 Morse Taper x 5 5/8" Flute Length x 9 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
9.00
23/32
23/32" x 2 Morse Taper x 5 5/8" Flute Length x 9 1/2" OAL High Speed Taper Shank DrillSKU 2332TS$9.009.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2332TS 23/32" x 2 Morse Taper x 5 5/8" Flute Length x 9 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
9.95
47/64
47/64" x 2 Morse Taper x 5 7/8" Flute Length x 9 3/4" OAL High Speed Taper Shank DrillSKU 4764TS$9.959.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
4764TS 47/64" x 2 Morse Taper x 5 7/8" Flute Length x 9 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
16.65
3/4
3/4" x 2 Morse Taper x 5 7/8" Flute Length x 9 3/4" OAL High Speed Taper Shank DrillSKU 34TS$16.6516.65
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
34TS 3/4" x 2 Morse Taper x 5 7/8" Flute Length x 9 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
22.50
49/64
49/64" HSS 2MT Taper Shank DrillSKU 4964TS$22.5022.50

49/64" HSS 2MT Taper Shank Drill Bit. Taper shank drills are made to fit Morse tapered holes. Designed to perform in a broad range of materials in the iron and steel families. They have a black oxide surface treatment that is abrasion resistant, reduces chip welding and improves chip flow.

  • Morse taper shank
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)

Dimensions

Overall Length 9-7/8"
Drill Bit Size 49/64 in
Flute Length 6"
Shank Size 2MT

Details

Item Taper Shank Drill Bit
Number of Flutes 2
Cutting Direction Right Hand
Drill Bit Point Angle 118 Degrees
Drill Bit Material High Speed Steel
Shank Type Taper
Point type Conventional Point
Drill Bit Finish Black Oxide
Point Style Conventional
read more ▼
Qty
4964TS 49/64" HSS 2MT Taper Shank Drill UNIVERSAL CUTTING TOOLS
22.19
25/32
25/32" High Speed Taper Shank DrillSKU 2532TS$22.1922.19

FEATURES: 

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
  • 9-7/8" OAL

SPECS:

  • Size: 25/32
  • Material: High Speed Steel
  • Finish: Black Oxide
  • Flute Length: 6
  • Overall Length: 9-7/8
  • Shank Size: 2MT
  • Shank Type: Taper
  • Style: Taper Shank
  • Cutting Angle: 118,
  • Point Type: Conventional Point
  • Number of Flutes: 2
  • Cutting Direction: Right Hand
read more ▼
Qty
2532TS 25/32" High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
10.95
51/64
51/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 5164TS$10.9510.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
5164TS 51/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
12.95
53/64
53/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 5364TS$12.9512.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
5364TS 53/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
13.50
27/32
27/32" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 2732TS$13.5013.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2732TS 27/32" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
14.50
55/64
55/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 5564TS$14.5014.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
5564TS 55/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
14.95
7/8
7/8" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 78TS$14.9514.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
78TS 7/8" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.50
29/32
29/32" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 2932TS$15.5015.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2932TS 29/32" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
14.95
59/64
59/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 5964TS$14.9514.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
5964TS 59/64" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.00
15/16
15/16" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank DrillSKU 1516TS$15.0015.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1516TS 15/16" x 3 Morse Taper x 6 1/8" Flute Length x 10 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.50
61/64
61/64" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank DrillSKU 6164TS$15.5015.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
6164TS 61/64" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.50
31/32
31/32" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank DrillSKU 3132TS$15.5015.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3132TS 31/32" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.50
63/64
63/64" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank DrillSKU 6364TS$15.5015.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
6364TS 63/64" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
15.50
1
1" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank DrillSKU 1TS$15.5015.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1TS 1" x 3 Morse Taper x 6 3/8" Flute Length x 11" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
18.00
1 1/64
1 1/64" x 3 Morse Taper x 6 1/2" Flute Length x 11 1/8" OAL High Speed Taper Shank DrillSKU 11644TS$18.0018.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11644TS 1 1/64" x 3 Morse Taper x 6 1/2" Flute Length x 11 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
19.50
1 1/32
1 1/32" x 3 Morse Taper x 6 1/2" Flute Length x 11 1/8" OAL High Speed Taper Shank DrillSKU 11322TS$19.5019.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11322TS 1 1/32" x 3 Morse Taper x 6 1/2" Flute Length x 11 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
20.50
1 3/64
1 3/64" x 3 Morse Taper x 6 5/8" Flute Length x 11 1/4" OAL High Speed Taper Shank DrillSKU 13644TS$20.5020.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13644TS 1 3/64" x 3 Morse Taper x 6 5/8" Flute Length x 11 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
29.99
1 1/16
1 1/16" x 3MT x 6 5/8" Flute Length x 11 1/4" OAL High Speed Taper Shank DrillSKU 1116TS$29.9929.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1116TS 1 1/16" x 3MT x 6 5/8" Flute Length x 11 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
89.99
1-5/64
1-5/64" HSS 4MT Taper Shank Drill BitSKU 1564TS$89.9989.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1564TS 1-5/64" HSS 4MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
38.15
1-3/32
1-3/32" HSS 4MT Taper Shank Drill BitSKU 1332TS$38.1538.15

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1332TS 1-3/32" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
49.99
1-7/64
1-7/64" HSS 4MT Taper Shank Drill BitSKU 1-764TS$49.9949.99

1-7/64" HSS 4MT Taper Shank Drill Bit. Taper shank drills are made to fit Morse tapered holes. Designed to perform in a broad range of materials in the iron and steel families. They have a black oxide surface treatment that is abrasion resistant, adds lubricity to reduce chip welding and improves chip flow

  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
  • Morse taper shank
  • 118° point

 

SPECS:

SIZE: 1-7/64”

MATERIAL: High Speed Steel

FINISH: Black Oxide

FLUTE LENGTH:7-18"

SHANK SIZE: 4MT

SHANK TYPE: Taper Shank

CUTTING ANGLE: 118 °

POINT TYPE: Conventional

NUMBER OF FLUTES: 2

CUTTING DIRECTION: Right Hand

read more ▼
Qty
1-764TS 1-7/64" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
30.99
1 1/8
1 1/8" x 4 Morse Taper x 7 1/8" Flute Length x 12 3/4" OAL High Speed Taper Shank DrillSKU 118TS$30.9930.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
118TS 1 1/8" x 4 Morse Taper x 7 1/8" Flute Length x 12 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
49.99
1-9/64
1-9/64" HSS 4MT Taper Shank Drill BitSKU 19644TS$49.9949.99

1-9/64" HSS 4MT Taper Shank Drill Bit

FEATURES:

  • Taper shank drills are made to fit Morse tapered holes
  • Designed to perform in a broad range of materials in the iron and steel families
  • They have a black oxide surface treatement that is abrasion resistant, reduces chip welding and improves chip flow
  • A dependable, general purpose drill ideal for production, maintenance or portable drilling jobs
  • For use in a wide range of materials such as aluminum, brass, copper, metal, plastic and wood
  • Made of high speed steel with a 118° conventional point

SPECS:

Size:
1-9/64
Material:
High Speed Steel
Finish:
Black Oxide
Flute Length:
7-1/4
Overall Length:
12-7/8
Shank Size:
4MT
Shank Type:
Taper
Style:
Taper Shank
Cutting Angle:
118
Point Type:
Conventional Point
Number of Flutes:
2
Cutting Direction:
Right Hand
Decimal Equivalent:
1.1406
Metric Equivalent:
28.97124mm
read more ▼
Qty
19644TS 1-9/64" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTING TOOL
79.99
1-5/32
1-5/32" HSS MT4 Taper Shank DrillSKU 1-532TS$79.9979.99

High Speed Steel TMX Taper Shank Core Drill. HSS Taper Shank 4 Flute TMX Core Drill, 1-5/32" cutting diameter x 7-1/4" flute length x 12-7/8" overall length (OAL) with # 4 MT shank.

  • Core drills can enlarge a hole up to 40% of it's original diameter
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1-532TS 1-5/32" HSS MT4 Taper Shank Drill UNIVERSAL CUTTING TOOLS
26.50
1 11/64
1 11/64" x 4 Morse Taper x 7 3/8" Flute Length x 13" OAL High Speed Taper Shank DrillSKU 11164$26.5026.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11164 1 11/64" x 4 Morse Taper x 7 3/8" Flute Length x 13" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
25.95
1 3/16
1 3/16" x 4 Morse Taper x 7 3/8" Flute Length x 13" OAL High Speed Taper Shank DrillSKU 11316TS$25.9525.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11316TS 1 3/16" x 4 Morse Taper x 7 3/8" Flute Length x 13" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
29.95
1 13/64
1 13/64" x 4 Morse Taper x 7 1/2" Flute Length x 13 1/8" OAL High Speed Taper Shank DrillSKU 11364TS$29.9529.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11364TS 1 13/64" x 4 Morse Taper x 7 1/2" Flute Length x 13 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
59.99
1 7/32
1 7/32" HSS 4MT Taper Shank Drill BitSKU 17322TS$59.9959.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
17322TS 1 7/32" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
27.95
1 15/64
1 15/64" x 4 Morse Taper x 7 7/8" Flute Length x 13 1/2" OAL High Speed Taper Shank DrillSKU 11564TS$27.9527.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11564TS 1 15/64" x 4 Morse Taper x 7 7/8" Flute Length x 13 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
36.99
1 1/4
1 1/4" MT4 High Speed Taper Shank DrillSKU 114TS$36.9936.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
114TS 1 1/4" MT4 High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
59.99
1-17/64
1-17/64" x 4MT High Speed Taper Shank DrillSKU 11764TS$59.9959.99

 

FEATURES:

  • Size: 1-17/64
  • Material: High Speed Steel
  • Finish: Black Oxide
  • Flute Length: 8-1/2
  • Overall Length: 14-1/8
  • Shank Size: 4MT
  • Shank Type: Taper
  • Style: Taper Shank 
  • Cutting Angle: 118
  • Point Type: Conventional Point
  • Cutting Direction: Right Hand
  • Number of Flutes: 2
read more ▼
Qty
11764TS 1-17/64" x 4MT High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
64.75
1-9/32
1-9/32" HSS 4MT Taper Shank Drill BitSKU 19322TS$64.7564.75

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
19322TS 1-9/32" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
33.95
1 19/64
1 19/64" x 4 Morse Taper x 8 5/8" Flute Length x 14 1/4" OAL High Speed Taper Shank DrillSKU 11964TS$33.9533.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11964TS 1 19/64" x 4 Morse Taper x 8 5/8" Flute Length x 14 1/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
36.00
1 21/64
1 21/64" x 4 Morse Taper x 8 3/4" Flute Length x 14 3/8" OAL High Speed Taper Shank DrillSKU 12164TS$36.0036.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12164TS 1 21/64" x 4 Morse Taper x 8 3/4" Flute Length x 14 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
37.95
1 11/32
1 11/32" x 4 Morse Taper x 8 3/4" Flute Length x 14 3/8" OAL High Speed Taper Shank DrillSKU 11132TS$37.9537.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11132TS 1 11/32" x 4 Morse Taper x 8 3/4" Flute Length x 14 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
34.95
1-23/64
1-23/64" x 4 Morse Taper x 8 7/8" Flute Length x 14 1/2" OAL High Speed Taper Shank DrillSKU 12364TS$34.9534.95

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12364TS 1-23/64" x 4 Morse Taper x 8 7/8" Flute Length x 14 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
68.79
1-3/8
1-3/8" HSS 4MT Taper Shank Drill BitSKU 138TS$68.7968.79

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
138TS 1-3/8" HSS 4MT Taper Shank Drill Bit COMPLETE MANUFACTURERS EQUIPMENT
199.99
1-25/64
1-25/64" HSS 4MT Taper Shank Drill BitSKU 12564TS$199.99199.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12564TS 1-25/64" HSS 4MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
35.95
1 13/32
1 13/32" x 4 Morse Taper x 9" Flute Length x 14 5/8" OAL High Speed Taper Shank DrillSKU 11332TS$35.9535.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11332TS 1 13/32" x 4 Morse Taper x 9" Flute Length x 14 5/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
139.99
1-27/64
1-27/64"HSS 4MT Taper Shank Drill BitSKU 12764TS$139.99139.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12764TS 1-27/64"HSS 4MT Taper Shank Drill Bit AAA KITTS LANDING PAGE
84.99
1-7/16
1-7/16" HSS 1MT Taper Shank Drill BitSKU 1716TS$84.9984.99

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1716TS 1-7/16" HSS 1MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
114.99
1-29/64
1-29/64" HSS 4MT Taper Shank Drill Bits**SKU 12964TS$114.99114.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12964TS 1-29/64" HSS 4MT Taper Shank Drill Bits** AAA KITTS LANDING PAGE
38.50
1 15/32
1 15/32" x 4 Morse Taper x 9 1/4" Flute Length x 14 7/8" OAL High Speed Taper Shank DrillSKU 11532TS$38.5038.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11532TS 1 15/32" x 4 Morse Taper x 9 1/4" Flute Length x 14 7/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
119.99
1-31/64
1-31/64" x 4 Morse Taper x 9 3/8" Flute Length x 15" OAL High Speed Taper Shank Dril****lSKU 13164TSD$119.99119.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13164TSD 1-31/64" x 4 Morse Taper x 9 3/8" Flute Length x 15" OAL High Speed Taper Shank Dril****l UNIVERSAL CUTTING TOOLS
49.99
1 1/2
1 1/2" x 4 Morse Taper x 9 3/8" Flute Length x 15" OAL High Speed Taper Shank DrillSKU 112TS$49.9949.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
112TS 1 1/2" x 4 Morse Taper x 9 3/8" Flute Length x 15" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
43.50
1-33/64
1-33/64" x 5 Morse Taper x 9-3/8" Flute Length x 16 3/8" OAL High Speed Taper Shank DrillSKU 13364TS$43.5043.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13364TS 1-33/64" x 5 Morse Taper x 9-3/8" Flute Length x 16 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
50.50
1 17/32
1 17/32" x 5 Morse Taper x 9 3/8" Flute Length x 16 3/8" OAL High Speed Taper Shank DrillSKU 11732TS$50.5050.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11732TS 1 17/32" x 5 Morse Taper x 9 3/8" Flute Length x 16 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
55.50
1 35/64
1 35/64" x 5 Morse Taper x 9 5/8" Flute Length x 16 5/8" OAL High Speed Taper Shank DrillSKU 13564TS$55.5055.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13564TS 1 35/64" x 5 Morse Taper x 9 5/8" Flute Length x 16 5/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
55.50
1 9/16
1 9/16" x 5MTx 9-5/8" Flute x 16-5/8" OAL High Speed Taper Shank DrillSKU 1916TS$55.5055.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
1916TS 1 9/16" x 5MTx 9-5/8" Flute x 16-5/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
57.95
1 37/64
1 37/64" x 5 Morse Taper x 9 7/8" Flute Length x 16 7/8" OAL High Speed Taper Shank DrillSKU 13764TS$57.9557.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13764TS 1 37/64" x 5 Morse Taper x 9 7/8" Flute Length x 16 7/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
57.95
1 19/32
1 19/32" x 5 Morse Taper x 9 7/8" Flute Length x 16 7/8" OAL High Speed Taper Shank DrillSKU 11932TS$57.9557.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11932TS 1 19/32" x 5 Morse Taper x 9 7/8" Flute Length x 16 7/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
62.50
1 39/64
1 39/64" x 5 Morse Taper x 10" Flute Length x 17" OAL High Speed Taper Shank DrillSKU 13964TS$62.5062.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13964TS 1 39/64" x 5 Morse Taper x 10" Flute Length x 17" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
70.00
1 5/8
1 5/8" x 5 Morse Taper x 10" Flute Length x 17" OAL High Speed Taper Shank DrillSKU 158TS$70.0070.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
158TS 1 5/8" x 5 Morse Taper x 10" Flute Length x 17" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
149.99
1-41/64
1-41/64" High Speed Taper Shank DrillSKU 14164TS$199.99 $149.99149.99
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)

SPECS: 

  • Size: 1-41/64
  • Material: High Speed Steel
  • Finish: Black Oxide
  • Flute Length: 10-1/8
  • Overall Length: 17-1/8
  • Shank Size: 5MT
  • Shank Type: Taper
read more ▼
Qty
14164TS 1-41/64" High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
62.50
1 21/32
1 21/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 12132TS$62.5062.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12132TS 1 21/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
69.95
1 43/64
1 43/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 14364TS$69.9569.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
14364TS 1 43/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
118.69
1-11/16
1-11/16" High Speed 5MT Taper Shank DrillSKU 11116TS$118.69118.69

Made To Fit Morse Tapered Holes. Designed To Perform In A Broad Range Of Materials In The Iron And Steel Families. Black Oxide Surface Treatement That Is Abrasion Resistant, Reduces Chip Welding And Improves Chip Flow

  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)

SPECS:

  • SIZE: 1-11/16”
  • FLUTE LENGTH: 10-1/8”
  • OVERALL LENGTH: 17-1/8”
  • Material: High Speed Steel
  • Finish: Black Oxide
  • CUTTING ANGLE: 118 Degrees
read more ▼
Qty
11116TS 1-11/16" High Speed 5MT Taper Shank Drill UNIVERSAL CUTTING TOOLS
72.00
1 45/64
1 45/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 14564TS$72.0072.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
14564TS 1 45/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
72.00
1 23/32
1 23/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 12332TS$72.0072.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12332TS 1 23/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
72.00
1 47/64
1 47/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 14764TS$72.0072.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
14764TS 1 47/64" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
67.50
1 3/4
1 3/4" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 134TS$67.5067.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
134TS 1 3/4" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
69.95
1 25/32
1 25/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 12532TS$69.9569.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12532TS 1 25/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
68.50
1 13/16
1 13/16" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 13165TS$68.5068.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13165TS 1 13/16" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
81.95
1 27/32
1 27/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank DrillSKU 12732TS$81.9581.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12732TS 1 27/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
79.50
1 7/8
1 7/8" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 178TS$79.5079.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
178TS 1 7/8" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
139.99
1-29/32
1-29/32" HSS 5MT Taper Shank Drill BitSKU 12932-TS$139.99139.99

1-29/32" HSS 5MT Taper Shank Drill Bit. Taper shank drills are made to fit Morse tapered holes. Designed to perform in a broad range of materials in the iron and steel families. They have a black oxide surface treatement that is abrasion resistant, reduces chip welding and improves chip flow

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
12932-TS 1-29/32" HSS 5MT Taper Shank Drill Bit UNIVERSAL CUTTING TOOLS
80.50
1 15/16
1 15/16" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 11516TS$80.5080.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
11516TS 1 15/16" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
90.00
1 31/32
1 31/32" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 13132TS$90.0090.00
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
13132TS 1 31/32" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
92.50
2
2" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 2TS$92.5092.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2TS 2" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
98.50
2 1/32
2 1/32" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 21322TS$98.5098.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
21322TS 2 1/32" x 5 Morse Taper x 10 3/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
299.50
2 1/16
2 1/16" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 2116TS$299.50299.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2116TS 2 1/16" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
105.95
2 3/32
2 3/32" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 23322TS$105.95105.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
23322TS 2 3/32" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
105.95
2 1/8
2 1/8" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 218TS$105.95105.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
218TS 2 1/8" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
109.50
2 5/32
2 5/32" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 25322TS$109.50109.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
25322TS 2 5/32" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
112.50
2 3/16
2 3/16" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 2316TS$112.50112.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2316TS 2 3/16" x 5 Morse Taper x 10 1/4" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
117.95
2 7/32
2 7/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 2732TS$117.95117.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2732TS 2 7/32" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
118.95
2 1/4
2 1/4" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 214TS$118.95118.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
214TS 2 1/4" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
123.95
2 5/16
2 5/16" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 2516TS$123.95123.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2516TS 2 5/16" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
128.50
2 3/8
2 3/8" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank DrillSKU 238TS$128.50128.50
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
238TS 2 3/8" x 5 Morse Taper x 10 1/8" Flute Length x 17 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
154.95
2-7/16
2-7/16" x 4 Morse Taper x 11 1/4" Flute Length x 18 3/4" OAL High Speed Taper Shank DrillSKU 2716TS$154.95154.95

These drill bits have a black-oxide finish that retains lubricants to improve the bits' wear resistance and chip flow. Black-oxide bits should only be used for drilling ferrous metals. High-speed steel drill bits provide more flexibility and absorb more shock and vibration than cobalt and carbide drill bits, making them suitable for use in manual drilling machines and handheld power tools. They may leave a rough finish on the hole. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece

  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2716TS 2-7/16" x 4 Morse Taper x 11 1/4" Flute Length x 18 3/4" OAL High Speed Taper Shank Drill AAA KITTS LANDING PAGE
166.95
2 1/2
2 1/2" x 5 Morse Taper x 11 1/4" Flute Length x 18 3/4" OAL High Speed Taper Shank DrillSKU 212TS$166.95166.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
212TS 2 1/2" x 5 Morse Taper x 11 1/4" Flute Length x 18 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
178.95
2 9/16
2 9/16" x 5 Morse Taper x 11 1/8" Flute Length x 19 1/2" OAL High Speed Taper Shank DrillSKU 2916TS$178.95178.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
2916TS 2 9/16" x 5 Morse Taper x 11 1/8" Flute Length x 19 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
184.95
2 5/8
2 5/8" x 5 Morse Taper x 11 7/8" Flute Length x 19 1/2" OAL High Speed Taper Shank DrillSKU 258TS$184.95184.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
258TS 2 5/8" x 5 Morse Taper x 11 7/8" Flute Length x 19 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
202.95
2 11/16
2 11/16" x 5 Morse Taper x 12 3/4" Flute Length x 20 3/8" OAL High Speed Taper Shank DrillSKU 21116TS$202.95202.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
21116TS 2 11/16" x 5 Morse Taper x 12 3/4" Flute Length x 20 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
214.95
2 3/4
2 3/4" x 5 Morse Taper x 12 3/4" Flute Length x 20 3/8" OAL High Speed Taper Shank DrillSKU 234TS$214.95214.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
234TS 2 3/4" x 5 Morse Taper x 12 3/4" Flute Length x 20 3/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
238.95
2 13/16
2 13/16" x 5 Morse Taper x 12 3/8" Flute Length x 21 1/8" OAL High Speed Taper Shank DrillSKU 21316TS$238.95238.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
21316TS 2 13/16" x 5 Morse Taper x 12 3/8" Flute Length x 21 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
250.95
2 7/8
2 7/8" x 5 Morse Taper x 13 3/8" Flute Length x 21 1/8" OAL High Speed Taper Shank DrillSKU 278TS$250.95250.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
278TS 2 7/8" x 5 Morse Taper x 13 3/8" Flute Length x 21 1/8" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
250.95
2 15/16
2 15/16" x 5 Morse Taper x 14" Flute Length x 21 3/4" OAL High Speed Taper Shank DrillSKU 21516TS$250.95250.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
21516TS 2 15/16" x 5 Morse Taper x 14" Flute Length x 21 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
250.95
3
3" x 5 Morse Taper x 14" Flute Length x 21 3/4" OAL High Speed Taper Shank DrillSKU 3TS$250.95250.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
3TS 3" x 5 Morse Taper x 14" Flute Length x 21 3/4" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
322.95
3 1/8
3 1/8" x 6 Morse Taper x 14 5/8" Flute Length x 21 1/2" OAL High Speed Taper Shank DrillSKU 318TS$322.95322.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
318TS 3 1/8" x 6 Morse Taper x 14 5/8" Flute Length x 21 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
376.95
3 1/4
3 1/4" x 6 Morse Taper x 15 1/2" Flute Length x 25 1/2" OAL High Speed Taper Shank DrillSKU 314TS$376.95376.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
314TS 3 1/4" x 6 Morse Taper x 15 1/2" Flute Length x 25 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
502.95
3 1/2
3 1/2" x 5 Morse Taper x 16 3/8" Flute Length x 25 1/2" OAL High Speed Taper Shank DrillSKU 312TS$502.95502.95
  • Morse taper shank
  • 118° point
  • Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
  • High speed steel
  • S. Steel ANSI Morse Dimensions (production grade)
read more ▼
Qty
312TS 3 1/2" x 5 Morse Taper x 16 3/8" Flute Length x 25 1/2" OAL High Speed Taper Shank Drill UNIVERSAL CUTTING TOOLS
MANUFACTURERS
PRIVACY POLICY
DIRECTIONS
PRODUCT CATEGORIES
<!-- Empty field (Illegal field store.PaymentLogosDesc) -->
8005216579