![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/Adobe_Express_20231119_1226000_1.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/buttons/Untitled--6-.png)
- Use this Grip On Tap & Die Set to repair damaged threads on bolts, pipes, hardware and more.
- Precision-machined taps and dies provide clean, straight and easy threading.
- Made of drop forged, heat-treated, tempered high-carbon steel.
Includes :
- long adjustable tap wrench
- die handle, screw pitch gauge
- T-handle tap wrench
- mini flat screwdriver
Tap and Die in each of these Sizes:
- M3 x 0.5, M3 x 0.6, M4 x .07, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75.
- Includes case.
Use while working with plumbing, hydraulics, air, and gas connections to prevent leaks. Nitrile Buna-N construction
resists oil, gas, water, and alcohol solvents.
Includes plastic storage case.
Features:
- O-Rings can be used while working in multiple different scenarios to prevent leaks
- Material of O-RIngs resists damaging oils, water and solvents
- Plastic case included to store O-RIngs
- Assortment of O-Rings provided for all types of projects
- 10 or more in each size
The Grip 53280 is a 45-Piece Tap and Die Set MM.
Features: Heavy duty, heat treated tungsten steel construction and rust resistant satin finish Precision machined to exacting standards Rockwell hardness of 58-61 HRC 
Heat treated, rust resistant, tungsten steel with satin finish. Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. Includes – 1 pc die handle wrench, 1 pc die adapter, 1 pc adjustable tap handle wrench, 1 pc stubby screwdriver, 1 pc t-handle tap wrench, 20 pc adjustable dies, 20 pc plug taps; all in a blow mold storage case.
Includes:
(20) coarse threads:
(2 each M6 x 1, M6 x .075, M8 x 1.25, M8 x 1, M10 x 1.25, M12 x 1.75, M12 x 1.5, M14 x 2, M14 x 1.5)
(20) fine threads:
(2 each M16 x 2, M16 x 1.5, MM18 x 2.5, M15 x 1.5, M20 x 2, M20 x 1.5, M22 x 2.5, M22 x 1.5, M24 x 3, M24 x 1.5)
In the Box: Grip 53280 Tap and Die Set MM 45-Piece Die stock handle wrench Die adapter Tap handle wrench Stubby screwdriver T handle tap wrench Blow molded storage case
- The tap and dies of the T31532 45 Pc. SAE Tap and Die Set provide straight, clean, and easy threading.
- Taps allow you to cut threads in a hole or clean out existing threaded holes.
- The dies allow you to clean threads on a screw.
- The tungsten steel with satin finish set was heat treated and is rust resistant.
- This SAE set comes in blow mold storage case.
Includes:
(1) handle wrench, (1) die adaptor, (1) adjustable tap handle wrench, (1) stubby screwdriver, (1) t-handle tap wrench, (20) adjustable dies, (20) plug taps.
Features
Heat treated, rust resistant, tungsten steel with satin finish. Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. Includes – 1 pc die handle wrench, 1 pc die adapter, 1 pc adjustable tap handle wrench, 1 pc stubby screwdriver, 1 pc t-handle tap wrench, 20 pc adjustable dies, 20 pc plug taps; all in a blow mold storage case.
GRIP 5 pc Door Panel Tool Set
This tool set is used to remove door panels and other interior trim. Wide blades reduce risk of damage to panel during removal. Blades are made of heat treated, stainless steel for durability. Handles are made of double injected rubber for a secure grip.
Includes three door panel tools and two trim tools
Hanging hole for easy storage
GRIP 6 pc Nut Driver Set SAE Sizes: 3/16" to 1/2"
Features:
- Ergonomically designed, soft grip handles
- Chrome vanadium steel shafts
- Bolster holes for extra leverage
- Hollow shaft to allow clearance for bolts
- Size identification on shafts
Sizes included:
3/16",1/4",5/16",3/8",7/16" and 1/2"
- Use to apply even pressure to remove gears, pulleys, bearings, and flywheels from the shaft without damage.
- Two/three jaws evenly distribute powerful pulling forces, protecting edges
of gear - Four or eight jaw configurations: short, standard, long, and extra long reach inside or outside grip.
- Precision machined hardened steel self-centering screw.
Use to apply even pressure to remove gears, pulleys, bearings, and
flywheels from the shaft without damage
Three jaws evenly distribute powerful pulling forces, protecting edges of gear from bending or chipping damages
Four or eight jaw configurations: short, standard, long, and extra long reach inside or outside grip
Precision machined hardened steel self-centering screw
8-3/4" Max Spread
4-3/4" Max Reach
7" Screw Length
17mm Screw Drive
Heavy duty, angled aluminum body with rubber tip and thumb trigger
• Use to Clean Damaging Dirt and Grime Build-ups
• Use with Large machinery, Engines, Heavy equipment, and More!
• White Zinc Plated Alloy Body Resists Corrosion
• 1/4" NPT Inlet Connects Quickly to Air Hose Couplings
•6"