839 General Magnetic Torpedo Level Made in U.S.A. Large reversible vials for reading top,bottom or side. Magnetic working edge. V-groove working edge for use in pipes. Internal aluminum frame,unbreakable end plates.Reg: $24.23

The #842 Precision Pencil Compass can mark a circle of specified size around a point.

•  
• Carpenter-quality; made of durable die-cast rust-proof metal
• Adjustable spring tension
• Scribe guide for edge marking
• For use with pencil (included) or slim ballpoint pen

The General Tools 807 Ratcheting Offset Screwdriver with 2 Slotted Blades is ideal for use where screws are concealed or obstructed, when leverage is required, or where turning space is limited. The drive rotation can be reversed instantly and the blades are constructed out of machined, ground, and hardened tool steel. 

For hard-to-reach screws.  Fit's 1/4" and 3/8" straight blades.

GENERAL TOOLS 5 pc. Shower Valve Wrench Set                                                                           Made in U.S.A.  

The General Tools 188 Shower Valve Wrench Set features five professional quality wrenches with two distinct socket sizes per wrench in a double-ended design. With an elongated body, the Wrenches are ideal for use on sunken valves and tile-covered shower walls. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver. The set comes with a bar handle for turning the wrenches and a wire holder for storage.

FEATURES:

• Five-piece set comes with five double end wrenches, bar handle and a bar wire holder for easy storage
• Sizes - 21/32 x 27/32, 29/32 x 31/32, 1-1/32 x 1-3/32, 1-5/32 x 1-9/32, 1-11/32 x 1-7/16
• Longer length for access to recessed valve stems in tile covered walls
• The hex-shaped bodies allow for use with an adjustable wrench
• There is also a hole near each end of the wrench for turning with a long screwdriver

Sizes include: 21/32",27/32",29/32",31/32",1 1/32",1 3/32", 1 5/32",1 9/32",1 11/32",and 1 7/16". Longer length for access to recessed valve stems in tile covered walls.

GENERAL Stair Gage Set                                                                                                   MADE IN USA  

DESCRIPTION The Stair Gage Set adds an extra dimension to a standard rafter square, allowing you to make uniform layouts for angle cuts. This tool is a must have for laying out rafter and stair stringers, and cuts down on time wasted making repetitive measurements. Features: Brass plated steel stair gage assures fast and uniform layout in repetitive work including angle cuts on rafters and stair stringers Attaches easily to all metal rafter squares Set of 2 pieces

• FAST & UNIFORM LAYOUTS – Speed up any measuring job, with better accuracy! Ideal for repetitive work such as cuts on rafters, stringers, or any type of stairway work
• UNIVERSAL FOR ANY SQUARE – Easily clamps to any metal framing, rafter or carpenter squares. An essential woodworking tool - no square should be without a set
• DURABLE & RUST RESISTANT – Brass plated steel for lifetime use and rust resistance
• EASY TO USE – After measurements, simply tighten the tops onto the square to use as references. The knurled screws allows for fast and easy adjustments

GENERAL TOOLS ECONOMY FEELER GAGE                                                     MADE IN U.S.A.

General's best selling feeler gage provides precision accuracy at a reasonable price. 3 x 1/2" leaves.

• Each leaf is etched with a size number (its thickness) measured in thousandths of an inch, as well as its millimeter equivalent
• Knurled lock nut holds leaves in desired position]
• No. of leaves: 26
• Leaf dimensions: 3 in. (L) x 1/2 in. (W)
• Leaf thickness: 0.0015 to 0.025 in. (0.038 to 0.635mm)

GENERAL TOOLS TUBING CUTTER                                                                               

General Tools professional tubing cutter is our most comfortable and easy-to-use model, designed for a lifetime of dependable use. Smooth-action retractable jaws expand for tubing sizes from 1/8 to 1-1/8 In., and up to 3/16 In. in thickness. The cutter easily slices through copper, aluminum, brass, stainless steel and other tin-wall tubing. Uses the RW122 cutting wheel made from bearing tool steel for superior cutting power. Includes a retractable reamer with dual cutting edges.

FEATURES:

• Contoured head with comfort grip for easy turning
• Knob contains storage compartment for extra cutting wheels - for copper, aluminum, brass and thin-wall stainless steel up to 3/16 In. thickness.
• Cutting wheel is made from bearing tool steel for maximum durability, full-size, fold-out reamer with dual edges, replacement wheel RW122.
• Grooved rollers accept flared pipe ends to provide cuts directly below the flare