RE09-IO by Seattle Glove, is a anti-fog polycarbonate safety glass.
- 99.9% UVA, UVB Protection
- Lightweight design for comfort
- Distortion free lens
- Polycarbonate lens provides 10 X more impact resistance than plastic
- Anti-scratch
- Meets ANSI Z87.1+ standard
- Dual wraparound for orbital proctection and seal
Applications:
Used for general manufacturing and anywhere Eye protection is needed.
- The crimper is used for both insulated and non-insulated terminals
- Perfectly mated cutter, heat treated to hold its edge
- Durable and smooth operating box joint construction
- A useful crushing area between handles and joint
- Electrocoated protective finish to prevent rusting
- Cross-hatched jaw tip for maximum gripping
- CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort
SF-3 TREE SHAPE - RADIUS TUNGSTEN CARBIDE BURR– ¼” shank
SF-3 tree shape burrs (also called Rounded Tree Shape) are great for interior contour work and rounded edge processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel). These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance.
Double cut or Cross cut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hard wood, and ceramic. Double cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and will see you through most application.
SPECS:
- Head Shape – Tree Shape Radius End
- Head Diameter – 3/8"
- Length of Cut – 3/4”
- Shank Diameter – 1/4"
- Overall Length – 2-1/2”
- Cut – Double Cut
- Max RPM – 70,000
- Chucking reamer set include 29 piece of 1/16-inches through 1/2-inches by 1/64-inches size
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- General purpose reamer that is used in a variety of applications and materials include alloy-tool steel, cast iron, plastic, aluminum and stainless free machining steel
- Comes in wooden case
Drill Chuck Arbor, Taper Shank To Jacobs Taper, Morse Taper 1MT, Jacobs Taper 33JT
- Drill chuck arbor for 33 Jacobs Taper Drill Chuck
- Use in a 1 Morse Taper drill press spindle or tailstock quill
- This arbor has a tang on the 1MT side
- Hardened machined tool steel
- **Picture is an example of the arbor type not the actual arbor, please check your chuck and your machines needs
Weiler 3/4" x 1/4" Shank Knot Style End Brush .020 Wire
Made in U.S.A. Item Knot Wire End Brush Dia. (In.) 3/4 Wire Size (In.) 0.020 Max. RPM 22,000 Trim Length (In.) 7/8 Shank Size (In.) 1/4 Weight 0.200000 lbs SKUs 4F709 Description •1/4" Stem-Mounted End Brushes •For use in portable tools. Compact brushes are shaped for hard-to-reach areas. Use for carbon cleaning; I. D. pipe cleaning; die, mold, and tool cleaning and polishing; and rust and paint removal. •Knot Wire •High-tensile carbon or 302 stainless steel yields maximum cutting action. High RPM ratings meet or exceed industry standards. Stem Mounted Knot Wire End Brush, Diameter 3/4 Inch, Wire Size 0.020 Inch, Maximum Speed 22000 RPM, Shank Size 1/4 Inch, Trim Length 7/8 Inch, Coarse
Designed to couple together two lengths of wire rope, or to form an eye or loop on wire rope. Wire rope should be the same diameter as rope clip. Consists of a U-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the U-bolt and clamped into place for a tight connection.
- Made from premium-quality steel for enhanced durability
- Helps quickly and safely terminate a wire rope
- To assemble, insert both ends of wire into clip saddle and tighten nuts until secure.
- For a safe connection, be sure to use the right number of clips; number of clips to use: 1/16 in. to 3/8 in. rope - 3 clips, 1/2 in. to 5/8 in. rope - 4 clips, 3/4 in. rope - 5 clips
- Malleable Iron Zinc plated.
- Do not use to hang loads, lift loads, support weight of persons or objects, and do not use on athletic or playground equipment.
- Essential hardware item for rigging rope, wire and cable Quality Tools for Hobby, Home and Industries
- Morse taper shank
- 118° point
- Black Oxide finish increases wear resistance and adds lubricity to improve chip flow
- High speed steel
- S. Steel ANSI Morse Dimensions (production grade)
SLITTING SAW ARBOR 1/2" WELDON SHANK
- Slitting Saw Holder Arbor 1/2" Straight Shank For Slit Discs Milling Lathe Tools
- Spring loaded mechanism accepts saw blades with hole dia. from 1/2" to 1"
- The blades are firmly secured in position with a Hex head screw.
- Saw Blades of Hole Diameter: 1/2", 5/8", 3/4", 7/8", & 1"
- 1/2" Straight Shank Well Suited for Mills & Lathes
- Saw not Included.
- Comes with Allen Key
SPECS:
- Shank diameter: 1/2"
- 2 1/2" overall length.
- Offers flexibility in sawing operations.
- Blades are firmly secured in position with hex head screw.
- Size: 1/2 inch
- Color: Gray
- Material: Forged Steel
- Mount Type: Lashing Ring Weld On
- Breaking Strength: 12,000 Lbs
- Work Load Limit: 4,000 Lbs
SIZES: 5/16" - 3/4"
- [High-quality tool set] Set includes 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4-inch combination ratcheting wrenches
- [Hardened steel] alloy steel construction resists everyday wear and tear and corrosion for lasting durability
- [Highly Adaptive] universal Spline drive works on 12-Point, 6-point, rounded 6-point, spline, e-torn and square fasteners for maximum speed and versatility
- [Dual direction] dual-direction off-corner loading feature offers better grip and reduces fastener rounding
- [Longer lasting] bright, full-polished chrome finish lasts longer Even under repeated use in harsh environments