TURNBUCKLES
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/rigging_hardware_tab.webp)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/Adobe_Express_20231119_1227580_1.png)
![<!-- Empty field [LinkGraphicDesc] -->](https://www.kittstools.com/media/Adobe_Express_20231119_1226550_1.png)
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Zinc Plated Steel
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Eye & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 4 and have a safety design factor of 5 to 1.
Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance. Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
Recommended for in-line or straight pull applications only.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
SOLD IN PACK OF 5
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
A turnbuckle is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of (A)two threaded eyelets, (B)one eyelet and one hook, or (C)two hooks; one screwed into each end of a small metal loop, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the loop, which causes both eyelets to be screwed in or out simultaneously, without twisting the eyelets or attached cables.
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
SOLD IN PACKS OF 5
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
SOLD IN PACKS OF 5
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
Zinc-Plated Turnbuckle Hook/Eye is designed to create tension in cables, ropes and chains by turning the body of the buckle to take up less slack. Perfect for marine, outdoor or general use. Uses an eye/eye, hook/eye and jaw/jaw configuration
FEATURES:
- Hook & Eye Turnbuckles meet the performance requirements of ASTM Specification F1145-05 and Federal Specifications FF-T-791B- Type1, Form 1, Class 6 and have a safety design factor of 5 to 1.
- Made from Drop-forged Carbon Steel for durability and Hot Dip Galvanized to ASTM A-153 for corrosion and weather resistance.
- Turnbuckle eyes are elongated, maximizing ease of attachment and minimizing stress.
SOLD IN PACKS OF 5
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains
SOLD IN PACK OF 5
- Stainless steel finish is corrosion resistant
- Not designed for overhead lifting
- Designed for use with rope, twine, and chains