• Made of high speed steel for sheet metal.
• 135° split points for fast drilling without center punching.
• Double ended bit can easily be flipped in a drill for new drilling end.
• Packed ten drill bits in a hang-up plastic display vial.

• For 12 and 24 Volt; and 42 Volt Hybrid systems
• Computer safe - draws 3 milliamps at 12 Volts
• Has two LED's for easy voltage identification: blue for 12 and 24 Volts and red for 42 Volts
• Wire stretches to 10 feet for use, then automatically retracts  
• Heavy duty ground clip with insulator
• Equipped with super sharp probe and heavy duty ground clip with insulator

• Use in automotive, autobody, marine and aviation shops.
• Makes accurate, straight cuts with clean edges on rubber or plastic hose, PVC pipe and certain types of wire and wire cable. 
• Easily handles up to 1 1/8" O.D. material.
• Tempered steel blade will cut: heater hose, fuel line hose, air conditioning hose, braided brake hose, copper tractor trailer cable, plastic side body molding trim and 12 Volt battery cable.
• Replacement Blade Part No. 14303.

• Kits contains all necessary brushes and tools to effectively clean spray guns including HVLP paint spray guns.
• Can also be used to clean gravity feed, siphon and undercoating guns.
• Safe to use with chemicals and solvents.
• Brushes are used to clean threads, air passages and recesses of gun body.
• Special pick probe is provided for cleaning air caps.
• Kit includes five different brushes, a pick probe, five wooden picks and a container of gun lube.

17500 S & G TOOL AID PAIL PUMP FOR 5 & 6 GALLON PAILS . Fits all 5 and 6 gallon pails. Easily dispenses fluid with lift action. For use with all non-corrosive liquids. TeflonÆseal designed for use with thinner. Fully plated, steel construction. Dependable and long lasting.

• Fully plated, steel construction
• Easily dispenses non-corrosive liquids with lift action
• Seals designed for use with thinner
• Fits all 5 and 6 gallon pails
• Easily dispenses fluid with lift action.
• For use with all non-corrosive liquids.
• Teflon® seal designed for use with thinner. 
• Dependable and long lasting.

SG19250 S&G TOOL AID 1/4" CAP. HEAVY DUTY RIVETER WITH NOSE PIECES Easily sets five sizes of aluminum and steel rivets: 1/8? (3.2mm), 5/32? (4.0mm), 3/16? (4.8mm), 7/32? (6.0mm) and 1/4? (6.4mm). Versatile and easy to use. Long handles for greater leverage. Comfortable handle grips. Metal construction and simple design with few moving parts to ensure years of service. Lightweight plastic bottle catches rivet stems. Nosepieces thread into handles for convenient storage. 19800 S&G TOOL AID 1/4" CAP. HEAVY DUTY RIVETER WITH 5 NOSE PIECES 1/8",5/32",3/16",7/32" & 1/4" . Manufacturer Information S & G Tool Aid is a manufacturer of automotive specialty tools for the automotive industry. Categories of coverage include diagnostic tools, electrical tools, air line accessories, suspension & alignments products, hand tools and collision repair products.

• Most widely used automotive circuit tester.
• Quickly checks all 6 and 12 volt systems.
• Use with power on.
• Includes 48" ground wire.
• Use to locate shorts, grounds and open circuits.

• Checks AC and DC wiring up to 36 volts
• Use to check series-parallel switches and solenoids on tractor-trailer starter systems
• An absolute must for the trucking, farm, heavy equipment and trailer industries
• 48" ground wire

If you're looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of durability and strength needed to provide long-lasting service life. Superior in functionality, it will help you make any job easier and faster.

FEATURES:

• "Circuit Master" is the modern universal circuit tester for all vehicles. Use to test all primary electrical circuits plus any on-board computer systems.
• Test computer circuits without fear of causing damage to expensive electronic components. Completely safe to use on microprocessor control modules.
• Operating range from 3-15 volts.
• Current draw is less than 21 milliamps at 12 volts D.C.
• Long life LED glows when voltage is sensed at probe and indicates polarity:
  Red = + (Positive)                    Green = - (Negative)
• Use to locate shorts, opens and intermittents.
• Made of high impact chemical resistant plastic.
• Supplied with a 4 foot ground wire.
• All solid state construction.
• "Circuit Master" is supplied with Protect-A-Terminal, Probe Adapter (Part No. 21713), which will not deform sensitive female terminals at computer connections.

This product has been discontinued

• Troubleshoot virtually all domestic and imported cars, SUV's and trucks.
• Use for testing newer vehicles with recessed spark plugs and conventional and coil-on plug ignition systems.
• Flashing bulb indicates ignition or fuel delivery problems.
• Provides information not available with OBD II code reading devices - pinpoints if there is a spark plug, plug wire, mechanical, fuel injection or electrical problem.
• Shows a duplicate view of the ignition spark so technician can visually check condition of ignition system at each cylinder. 
• Frequency and intensity of flash indicates whether there is an ignition system problem or fault in the fuel delivery system.
• Safety orange color for easy visibility.

3 Position Inspection Sticker Scraper General purpose windshield and window scraper uses single edge razor blade Blade section folds into handle and locks for safe storage.

Features and Benefits:

• General purpose windshield and window scraper uses single edge razor blade
• Can be used in three different lock positions to aid in cleaning windshields at corners and on curved surfaces
• Blade section folds into handle and locks for safe storage
• Supplied with blade
• Made with precision and quality in mind

33950 S & G TOOL AID FUEL INJECTION PRESSURE TESTER WITH TWO GAUGES • Test gasoline fuel pump pressure on most domestic and imported fuel injection equipped vehicles. • Easy to hook up and read. • Kit contains everything to test all GM vehicles with multi-port and some throttle body injection TBI. • Test all Chrysler cars with multi-port turbos and some TBI. • Use on most Ford TBI systems equipped with or without small Schrader test valve. • Test all Ford vehicles with multi-port fuel injection systems. • Includes two gages for more accurate testing: Large Gage - Calibrated from 0-100 PSI 0-7.0 BAR Small Gage - Calibrated from 0-50 PSI 0-3.5 BAR • Large gage can be used for all applications and has hang-up hook. • Small gage provides more detail when pressure will not exceed 50 PSI 0-3.5 BAR. • Full instructions included. • Supplied in durable vinyl pouch for store display and tool box storage.

• Specially designed brushes for cleaning the small air passages on air caps and fluid tips.
• Can also be used on small orifices found on engines, such as throttle bodies and carburetors.
• 5 brushes with the following diameters: .0625", .094", .125", .156" & .187".
• Durable nylon bristles for long lasting use.
• Convenient wire ring holder keeps set intact.

SG 87250 S&G TOOL AID DUAL-TEMP HEAT GUN .

This is an inexpensive, high performance, hot air source that delivers concentrated, heated air to the job. Use in autobody, automotive, industrial, marine, home, farm and numerous other applications. Has two heat selections: 750_F and 1,000_F. Only weighs 1.2 pounds. Operates on 120 volts, 10 amps, 1,200 watts. Contains no asbestos. U.L. and CSA listed. Full instructions provided for most all applications. Special purpose nozzles are available for easy attachment.

91425 S & G TOOL AID 5/16" NUT SPLITTING TOOL (FOR NUTS 5/16" OR 8MM STUDS) 5/16" Nut Splitting Tool •Quickly remove rusted nuts on shock absorbers, exhaust systems and other hard to reach locations. •For nuts on 5/16" or 8mm studs. •Overall length: 10"

91435 S & G TOOL AID 3/8" NUT SPLITTING TOOL (FOR NUTS 3/8" OR 10MM STUDS) 3/8" Nut Splitting Tool �Quickly remove rusted nuts on shock absorbers, exhaust systems and other hard to reach locations. �For nuts on 5/16" or 8mm studs. �Overall length: 10"

S&G Tool Aid 98300 Air Adjustment Valve For Paint Spraying(160 PSI). Air Adjustment Valve for Paint Spraying Allows for fine regulation of air entering spray gun. •Approximately 2 1/2 turns from sully opened to closed valve. •Gauge has dual scales, 160 PSI and 11 Kg/Cm2. •Inlet is 1/4 inch NPT Male •Outlet is 1/4 inch NPT Female and swivels.

SG-87425 S&G TOOL AID Braided,Golden,Stainless Steel,Windshield Cut-Out Wire.

• Extends life of all buffing pads and bonnets without taking them off the polisher.
• Cleans and revitalizes in one operation.
• Removes glazed surface and fluffs packed wool.
• Brings pads and bonnets back to like new condition in seconds.
• Minimizes washing.

•  
• Slotted for smooth edge panel cutting and ripping.
• .401" Parker shank pneumatic chisel.
• Excellent quality, economy priced.
• Made to exacting Tool Aid standards from alloy steel with .401" Parker shanks.
• Covered by Tool Aid`s "no questions asked" warranty.
• Packaged in see-through vinyl pouch.

• For use with all petroleum products, lacquers, varnishes, thinners, alcohol and auto anti-freeze.
• Push lever control.
• Drum faucet is 3/4" NPT Male.
• Zinc plated inside and outside for improved corrosive resistance.
• Has nylon valve for longer life and better seal on thin liquids.
• Automatically self closing.
• Can be padlocked only in closed position.
• Not for use with trichlorethylene and other chlorinated products or detergents and water solution chemicals.

• Use to quickly troubleshoot ignition system.
• Device is "hands free" and connects in-line between spark plug and spark plug wire.
• Shows a duplicate view of the ignition spark and checks the condition of ignition system at each cylinder.
• Frequency and intensity of flash indicates whether there is an ignition system problem or a fault in the fuel delivery system.
• Connects in-line between the spark plug and the ignition wire
• Technician can visually check condition of ignition system at each cylinder
• Frequency and intensity of flash indicates whether there is an ignition system problem or a fault in the fuel delivery system
• The bright light can be seen in the bright sunlight.

How to Use

• Removes water and foreign particles from compressed air stream.
• Attaches directly to paint spray gun or air tool.
• Clear reservoir shows accumulated water taken out of air line.
• Button release valve allows for easy disposal.
• 1/4" NPT Male inlet x 1/4" NPT Female outlet.
• Filter can be removed and cleaned periodically.
•  
• The male threads are on the inlet side and the female threads are on the outlet side. The 99000 should be used with the female outlet in the up position.

• Provides unrestrained knee comfort.
• Protects clothing.
• Perfect for all technicians, insurance estimators and service advisors.
• Great as a creeper cushion and seat cushion.
• Measures 23" long x 11" wide with 3/4" thick closed cell foam.
• Tough, non-slip laminate surface.
• Impervious to water, oils and other liquids.
• Convenient hang-up hole.
• Easy to clean.

Designed to withstand the most rugged use

• The best quality electrical circuit tester available for checking 6 and 12 volt systems.
• Has heavy duty ground clip and insulator.
• 5` of tough, flexible, heavily insulated rubber wire is retained in spring supported strain relief designed to withstand the most rugged use.
• Made to last a lifetime!
• Bulb is easily replaced. Replacement Bulb Part No. 27010 (G.E. 1889 or equivalent).

• For patching sheet metal panels uniformly and quickly.
• Forms a step around the area to be repaired.  Patch is placed on flange of step, flush with the original panel surface.
• Full grip handle.
• 7" overall length.
• .401" Parker shank pneumatic chisel.

Smooth Heavy Duty Caulk Gun by S&G Tool Aid®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of durability and strength needed to provide long-lasting service life. Superior in functionality, it will help you make any job easier and faster.

• Push rod design quickly and easily dispenses a smooth flow of sealants and compounds from 1/10 gallon cartridges.
• Completely empties cartridge.
• Quick release trigger removes pressure and stops material flow.
• Epoxy coated steel and die cast construction.
• Durable and dependable.

SELF POWERED ELECTRICAL CONTINUITY TESTER

Features:
•Use to test for continuity with power disconnected.
•Excellent for use on marine, recreational and general automotive vehicles.
•Test appliances and other electrical circuits with power off.
•Supplied with 48" lead wire.
•Uses any AA 1.5 volt battery. Battery not supplied.
•Replacement Bulb Part No. 22707

26025 S&G Tool Aid 24-40 Volt Circuit Tester

26050 S&G Tool Aid High and Low Voltage Circuit Tester . Two electrical testers in one! Trouble shoots both primary and secondary circuits. Checks spark plugs,plug wires and distributor cracks. Test for shorts,grounds and open circuits with power on for 6 and 12 volt systems. The best available value in a circuit tester. Made of durable,non-conductive plastic.

• Chisel retainer keeps .401" Parker shank chisels firmly in place.
• Chisels can be changed quickly and easily.
• Fits most air hammers.
• Chisel retainer keeps 0.401 Inch Parker shank chisels firmly in place
• Chisels can be changed quickly and easily

401 Parker Shank Tail Pipe Cutter by S&G Tool Aid®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by S&G Tool Aid® will last a lifetime. It will meet your needs and deliver great quality at an affordable cost.

• Features:

  • Made to ensure the highest level of quality and value
  • Expertly crafted in accordance with the strictest industry standards
  • Developed using innovations to effectively serve the automotive aftermarket
  • Guaranteed to provide the ultimate comfort and perform as hard as you do
  • Trusted for impeccable design and precise engineering

APPLICATION: Air tool accessory

SHANK TYPE: Heavy Duty Parker

SHANK SIZE: .401 

USES: For all pipe cutting

• Air Tool Accessory
• Heavy Duty .401 Parker Shank Tool.
• Break sleeve rust and corrosion on tie rod work.