DIES LEFT HAND ADJ ROUND SPLIT

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• Precision threads are accomplished through the use of the adjustment screw
• High speed steel
• CNC ground
• Outer Diameter: 1"
• Thread Size: #10
• TPI: 32
• Condition: New
• Material: High Speed Steel
• Manufacturer: Michigan
• MPN: 107-01032

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

1/4"-20 1" OD HSS Left Hand Round Adjustable Die

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holder

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

1-1/2"-6 2-1/2" OD HSS Left Hand Round Adjustable Die

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holder

• For use in making new threads or re-threading existing threads
• Good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Round die is chamfered on both faces
• One side has a 2 to 3 thread chamfer for threading, the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder
• Adjustment is obtained by a fine pitch screw which forces the sides of the die apart, or allows them to spring together
• The slot is beveled so that when the dies are used in a machine holder the adjusting screw can be removed and adjustment made by the adjusting screws in the holde

MDH-1894 4PC. 1" HEX DIE ADAPTERS SIZES: 131/6",1",1 1/2" & 2" . Easily converts round dies into hex dies. Just set the correct size die into adaptor and tighten set screw. Great tool to use where conventional die stocks cannot swing due to lack of space.